search for: sruffel

When I compile dahdi I see these warnings: WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/wctdm24xxp/wctdm24xxp.ko] undefined! WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/dahdi.ko] undefined! And "modinfo dahdi" shows that the driver was built for a 2.6.17 kernel, SMP mod_unload 586 4KSTACKS gcc-4.1 If I "modprobe -a dahdi", I get

Hi, I've been getting regular CPU usage spikes(50%-80%), due to asterisk (according to top). I never noticed this on 1.4, and I have top running in the background pretty much all the time. In between those spikes Asterisk stays under 10% CPU usage (I have a transcoder card, which helps). It's very regular, never any missed spike, or any spike in between the regular spikes. I

I just installed an FXS module onto a 4 channel tdm thats about 5 years old and it wont work. Running dmesg I can see the following error: Zapata Telephony Interface Registered on major 196 Freshmaker version: 71 Freshmaker passed register test !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should

Not sure how I should officially report this, but I'm getting a compile error with DAHDI-linux 2.7 when I define CONFIG_DAHDI_NET in include/dahdi/dahdi_config.h. I am able to compile successfully when I leave it undefined, but I need to be able to use the network support. <snipped> /oct6100_api/oct6100_tsst.o AR /tmp/dahdi-linux-2.7.0-net/drivers/dahdi/oct612x/lib.a

I have a server with an asterisk ss7 link connected to a Siemens working well for over a year. A few days ago I started having problems with signaling. I found the following logs in / var / log / messages Sep 12 11:49:25 call3 kernel: [1018427.030959] dahdi: Master changed to TE2/0/2 Sep 12 11:49:25 call3 kernel: [1018427.120740] dahdi: Master changed to TE2/0/1 Sep 12 11:49:26 call3 kernel:

Hi, On a (bogus) system equiped with a Digium HA8 and 8 BRI ports, I'm reading this: # asterisk -rx "dahdi show status" Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO HA8-0000 RED 109 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) HA8-0000 UNCONFI 109 0

...few extra milliseconds of latency, allow the two boards to peacefully coexist on the same IRQ. Please feel free to checkout the code on any test servers you may have and let me know any results. Both the good and the bad are welcome. To get the code: svn co http://svn.digium.com/svn/zaptel/team/sruffell/voicebus Many thanks, -- Shaun Ruffell Linux Kernel Developer Digium, Inc.

2010/12/1 Shaun Ruffell <sruffell at digium.com> > On 12/01/2010 11:00 AM, Shaun Ruffell wrote: > > On 12/01/2010 09:56 AM, Olivier wrote: > >> I'm facing an issue with which loading wctdm24xxp module fails. > >> [ 33.527942] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive > frame. >...

...r your lighting fast correction !! > 2. I took the Hardware Echocan module off my board and it seems to > correct the issue. > > I'll dig deeper to check if I correctly applied the patch and both > report here and in DAHLIN-275 ticket. > > > 2012/1/9, Shaun Ruffell <sruffell at digium.com>: >> On Mon, Jan 09, 2012 at 01:47:48PM -0600, Shaun Ruffell wrote: >>> On Mon, Jan 09, 2012 at 07:52:02PM +0100, Olivier wrote: >>> > Hi, >>> > >>> > On a brand new system, I met an issue I've never met before. >>> &...

Hi, My set up is : Asterisk with B410P in NT mode <-------------cat5 straight cable ----------------> Another PBX in TE mode Is the 100 Ohm terminator you can find on B410P boards, necessary when connecting in NT mode to another PBX (set in TE mode) ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I've recently given a try to a Digium D70 phone. At the moment, I'm configuring them though config files with a DHCP server and not using DPMA. Of course, I'm connecting them to Asteris (PJSIP stack on 13.7.0). Which is the best place to: - read about past issues - open new tickets for remaining issues. Best regards -------------- next part -------------- An HTML attachment

Hi, I'm reading Digium HA8 manual (page 55). It lists several parameters that can be used to configure a BRI port. More precisely, it suggests that : Term, is the last parameter NT/TE is the one just before (starting from the end). If I'm not mistaken, it seems dahdi_genconf generates /etc/dahdi/system.conf files in which both parameters order is reversed : # Span 1: WCBRI/0/0

Hi All, for a vicidial server which uses only voip, which is the minimum telephony card which would provide the required clock timing source for conferences to work properly ? Maybe the Digium TDM410PLF card without any daughter card would do the job ? Thank you very much for supporting. Have a nice week-end, Mike

Hi all, What hell hapen here? asterisk:/etc/asterisk# /etc/init.d/dahdi startLoading DAHDI hardware modules:FATAL: Error inserting dahdi (/lib/modules/2.6.26-2-686/dahdi/dahdi.ko): Device or resource busy wct4xxp: done wcte12xp: done wct1xxp: done wcte11xp: done wctdm24xxp: done wcfxo: done wctdm: done wcb4xxp: error wctc4xxp: done xpp_usb: doneError: missing /dev/dahdi! When

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

...est idea what kind of impact this could have. Side testing zaptel 1.4.10 on a simpler system, an HP Proliant ML110 (nearly a PC), the error does not show up as well. I checked the zaptel 1.4.10 ChangeLog and there are some changes which I'd suspect: 2008-04-01 16:39 +0000 [r4122] sruffell <sruffell at localhost>: * kernel/wct4xxp/base.c: Work around for host bridges that generate fast back to back transactions which the current version of the quad span cards do not advertise support for. 2008-03-14 16:39 +0000 [r3983-3990] Matthew Fredrickson <creslin at...

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at

I just installed a TE820 octal span T1 card, and it's not showing up in dahdi_hardware output. This was installed into a test machine that already has a TDM800P card in it, and that one is showing up and working fine. Is there some kernel module that I'm missing? Lspci: 05:04.0 Ethernet controller: Digium, Inc. Wildcard TDM800P 8-port analog card (rev 11) 21:08.0 Communication

I am having a problem with a new PRI turn-up on dahdi 2.5.0 and asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS, ESF and the span shows up and ok. This PRI is merely a crossover T1 going into an old DC0 class 5 switch. I am getting the following errors over and over again [Aug 16 10:26:10] NOTICE[8002]: chan_dahdi.c:3043 my_handle_dchan_exception: PRI got event: HDLC Bad FCS