search for: speeddial

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with...

Hi - Has anybody been able to successfully remap SpeedDials on Polycom phones? The manual seems to indicate that you can, and I followed the advice in this list message: http://lists.digium.com/pipermail/asterisk-users/2005-October/129142.html The result I get is that the remapped buttons act as the VolumeUp button, rather than as a speed dial. My confi...

Hi, Does anyone know how to define speeddials in XML for the 7970 sip firmware?. I've played with the SEP<mac>.cnf.xml file that was posted previously but can't find a way to do it. I can define them on the phone usually (seems a bit buggy) but if the phone reboots they get lost from the config. Does anyone know a way to do...

On Sat, May 28, 2005 at 01:51:56AM +0200, Stefan Gofferje arranged a set of bits into the following: > Hi folks, > > I'm trying the latest mayday chan_sccp and found it difficult to have > more than three speeddials. I have defined only one line but can't get > more than three SDs. On console, * says > > May 28 01:44:12 ERROR[26933]: sccp_actions.c:252 > sccp_handle_line_number: SCCP device SEP000xxxxxxxx requested a line > configuration for unknown line 3 > May 28 01:44:12 ERROR[269...

...on 79XX with a voicemail context. Adds > "voicemail" keyword to sccp.conf file. I'd done VM button sipport a while ago, just was a bit buggy, this patch has the same issue, it shouldn't be much work to fix it, and will probably go in soon. > Especially the behaviour of the speeddials is kinda annoying. The first > speeddial always starts immediately on line 1. The rest do nothing > without a line selected in advance. > The patches are against the mayday build, so maybe, somebody of the > chan_sccp maintainers would care to include them? They've been in the q...

...e 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its configs from sccp.conf, etc, the 7910's work fine. here is the error i get on the speed dial crashing asterisk == >> Got message StimulusMessage -- Got {StimulusMessage} stimulus=SpeedDial(2) stimulusInstance=1 Segmentation fault using skinny load of P00403020700 asterisk 1.0-RC1 chan_sccp - lastest from chan_sccp at sourceforge here is sccp.conf [general] keepalive = 5 context = sccp dateFormat = D-M-Y bindaddr = 206.156.254.118 port = 2000 [SEP0004DD1E63CF] type = 7910...

created you must place it in your web directory on the server. =20 I chained the command and also wrote the output to an xml file in the web directory. The command looks like this: =20 'php /etc/asterisk/directory.php.txt > /var/www/html/directory.xml' =20 System Speeddials using Services Button =20 =20 For speed dials I modified the php code to look to a specific file in the asterisk directory called speeddials.conf. This file only contains attributes that the php script will look for. This is great because you only need to specify the number and name fields. B...

...;t require numbers to be terminated with # everything works as expected, but you have to wait for the digit timeout, of course. MESSEGE: DEBUG[1150520624]: File pbx.c, Line 1683 (ast_pbx_run): Oooh, got something to jump out with ('#')! -- Invalid extension '#' in context 'speeddial' on SIP/2111-076f CONFIG: [default] exten => 74#,1,Goto(speeddial,s,1) [speeddial] exten => s,1,Background(${MYSOUNDS}/enterspeedcode) exten => 1#,1,Background(${MYSOUNDS}/speedhelp) exten => 1#,2,Goto(s,1) exten => _[2-9]#,1,SetVar(SPEEDCODE=${EXTEN}) exten => _[2-9]#,2...

...can you store "pauses" in speed dials for the GXP-2000? I used something like 8005551212,,,1,7890 to dial the toll free number, wait 6 seconds (I'm used to the commas being a 2 second delay), pressing 1, waiting 2 more seconds and then entering 7890. However, when I press the speeddial button, the phone freezes. Thanks, Waldo

I don't think that will fix my problem. The hints on the individual user extensions (101, 102, 103 and 104 below) are working just fine. sccp.conf example of 1 user: [devices] type = 7970 description = User1 tzoffset = -6 autologin = 101,401 speeddial = 102,User2,102@wct-internal speeddial = 103,User3,103@wct-internal speeddial = 104,User4,104@wct-internal device => SEP000F90CEF9D3 [lines] id = 101 pin = 1234 label = User1 description = Line101 context = wct-internal incominglimit = 2 mailbox = 101@wct-internal vmnum = 8501 cid_name = User1...

I've added lines like this: speeddial = 123,test speeddial = 260,Bob in the [device] section for my 7921, but the speed dials do NOT appear on the menu (click right from the main screen). Am I missing something obvious here? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL: http:/...

Hello I patche dmy 7970 with the current SIP image i have 2 lines on it via sip and 6 hint speeddials but it seems thats only a speeddial no infos about busy status or so comes to the speddial button. somebody can help me?

Hello @List, i'm using a Cisco 7970 / 7914 phone with Asterisk 1.4 & sccp part of my sccp.conf type = 7914 (Cisco 7970 with 7914 phone extension) autologin = 117 description = Test speeddial = 10,Test (10),10@mycompany my speeddial line is for internal call howto call a external number eg. +xx467584933 ?? i want to press a button and call directly out thank you greetings, Daniel

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4 value: "#,700" softkey4 line: 1 softkey4 states: connected So the bottom left soft key does and says "Park" when connected. -- Regards, Russell...

...t to an xml file in the = web directory.&nbsp; The command looks like this:<br> &nbsp;<br> &#8216;php /etc/asterisk/directory.php.txt &gt; /var/www/html/directory.xml&#8217;<br> &nbsp;<br> <b><span style=3D'font-weight:bold'>System Speeddials using Services = Button</span></b>&nbsp;&nbsp;&nbsp;&nbsp;<br> &nbsp;<br> For speed dials I modified the php code to look to a specific file in = the asterisk directory called speeddials.conf.&nbsp; This file only contains attributes that the php scr...

...nique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial= lines set up for all other employees to assign the other employees to softkeys. All employee lines show up on all phones. This works fine. If employee A is on the phone, all other employees see his line as being in use. My problem is when we add an auto attendant to the mix. We want to...

Hi all, Is there a "speed dial" type application in *? The NEC PBX we currently use has a feature which allows any phone to access a system-wide speed dail database simply by keying the speed-dial number and pressing the 'redial' key from any extension. Even using a vinella phone on an sli the user can dial 77+speedial# and access this directory. Does * have a similar

...ort = 2000 ; listen on port 2000 (Skinny, default) debug = 10 [devices] type = ata description = Bedroom tzoffset = 0 autologin = 6004 device => ATA0016c7a0e0d4 type = ata description = Office tzoffset = 0 autologin = 6000 speeddial = 6001,6001,6001@internal speeddial = 6004,6004,6004@internal device => ATA16c7a0e0d401 type = ata description = LivingRoom tzoffset = 0 autologin = 6001 speeddial = 6000,6000,6000@internal speeddial = 6004,6004,6004@internal device => ATA0016c75645ec...

...sco devices? The units in question are running 2.16. JT <snippet of code where I'm inputting the number - line has already been Answered> [class4.6] exten => change,1,ResponseTimeout(5) exten => change,2,Playback(special/edting-spd-dial-number) exten => change,3,SayDigits(${SPEEDDIAL}) exten => change,4,Background(silence/1) exten => change,5,Background(special/entr-nmbr-fr-spddial-entry) exten => change,6,Background(special/and-prs-pound-whn-finished) exten => change,7,Background(silence/3) exten => change,8,Goto(5) ; strip off any extra pound or * symbols, and...

...a want to use thusly [ext-666] exten => _.,1,SetVar(areacode=666) exten => _.,2,Background(zz-in-who) ; give them list of extns exten => _.,3,WaitExten(10) ; let them enter extn to call include => extensions include => applications include => speeddials exten => i,1,HangUp exten => t,1,HangUp how do i hack this? randy