search for: span2

Hi below are my configs: pstn(e1)--->asterisk (span1)----->legacy pbx(connected via span2)-----> legacy pbx analog extensions. my dial plan is like callers dial into asterisk(span1) , hear an IVR option and they are connected to the agents via the legacy pbx (which is in sync with asterisk on span2)....This works perfectly fine until about 200 calls or so...After that time when aste...

I've googled / voip-info'd / searched until my eyes are blurry, but couldn't see the info I was looking for. I've turned here for help! Asterisk CVS head (9/7/04) Fedora Core 2 (updated to 2.6.6 kernel) DE405P (jumpers set to E1) I want to put asterisk in the middle of our current pbx (Meridian Option11) Currently the meridian has a 2MB pri EuroISDN card linked via a rj-45 into

Skipped content of type multipart/alternative

...lls thru /var/spool/asterisk/outgoing One e400P if doing the carrier work making calls and the other just receives the calls: Server#1 Server#2 caller callee +-------+ +-------+ | Span1 |--E1 crossover cable-->| Span1 | | Span2 |--E1 crossover cable-->| Span2 | | Span3 |--E1 crossover cable-->| Span3 | | Span4 |--E1 crossover cable-->| Span4 | +-------+ +-------+ The basic configuration seems ok, since zttool shows the links are OK. I'm using this UTP cat5 cross-cable (not shielded): p...

...TE406 in the following scenario: ISDN -> TE406 -> PABX I understand from Steve Underwood's site that echo cancellation is not good for faxes (and they do that themselves). So what I want to do and bypass echo cancellation for selected extensions before bridging the calls from span1 to span2. Thanks!

asterisk-users Any help will be appreciated. This card did not connect with E1 line how to loop E400P card to test ? now I loop the card. span 1 ---span2 RJ45 pins 1--4 2--5 but show : When calling ,showing error: app_dial.c:764 dial_exec: Unable to create channel of type 'Zap' Asterisk Ready. *CLI> -- Registered SIP '2002' at 192.168.139.59 port 3289 expires 120 -- Executing Dial("SIP/2002-a4af", "Za...

Hello, Is it possible, for testing, to connect an cat5 straight patch cord between 2 ports of a Digium B410P card and use these 2 ports as a normal dahdi trunk ? I've tried this: One port is set as NT, the other as TE. I would expect timing to come for system hardware so I choose in /etc/dahdi/system.conf : span=1,0,0,ccs,ami span=2,0,0,ccs,ami Results: - both ports lights are green -

...=47 bchan=63-77,79-93 dchan=78 bchan=94-108,110-124 dchan=109 # NOTE: Most E1 use alaw codec and this must be specified. alaw=1-124 # # Global data loadzone = uk defaultzone = uk Redfone.conf: [globals] fb=192.168.1.254 port=1 server=00:0F:B5:8D:CB:95 [span1] framing=ccs encoding=hdb3 slave [span2] framing=ccs encoding=hdb3 master [span3] framing=ccs encoding=hdb3 master [span4] framing=ccs encoding=hdb3 master zapata.conf: [trunkgroups] [channels] language=en xwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfe...

Hi, No one seems to have any issue with the following posting. Can any one suggest how to install/configure channel drivers to work. Basically I am trying to send the SIP calls to GNUGK but Asterisk reports the error "No channel driver found". >>> I was trying to compile the oh323 channel driver but unable to compile the openh323_1_13_5 (which is the only required version as

...niences. When the call takes the salient line, I receive an error of signaling. In * I have loaded the following: - libr2 installed - The [ar] in zonedata.c and indications.conf is configured - zaptel.conf o: span=1,0,0,ccs,hdb3,crc4 span=2,0,0,cas,hdb3 #span1 bchan=1-15,17-31 dchan=16 #span2 cas=32-62:1001 alaw=1-62 loadzone=ar defaultzone=ar - In zapata.conf I configured alone the ISDN. - Signaling: 06450 0000000 S 0000 1001 H'46 BT27D-2913 06450 0000000 R 0000 1001 H'46 BT27D-2913 14000 0007550 SEIZURE...

...4 - Circuit/channel congestion) When this problem appear I must restart Asterisk to solve it. Another thing, I don't know why the alarm is set to NOP on SPAN 2 ? Maybe it comes from here ? Any ideas ? The configuration : PRI (France Telecom) 15 channels <====> (SPAN1) Asterisk (SPAN2) <=====> IVR Server : - Dell power edge 1800SC - 2 Ethernet cards (LAN + VoIP LAN) - Digium card : TE 405P - Linux Mandriva LE 2005 (10.2) : Linux ASTERISK 2.6.11-12mdksmp #1 SMP i686 Intel(R) Xeon(TM) CPU 3.00GHz unknown GNU/Linux - Asterisk 1....

...PRI telco. Another strange issue is, If I make a slip of the finger and I dial 1-349-555-55551 with a trailing digit all works fine. Anyone have an idea???? I tried relaxing the DTMF on both PRI's as well. Debug does't show anything either. SPAN1 is connected to my Telco's PRI and SPAN2 is connected to a Norstar Meridian. Here is my zapata.conf: [channels] #PRI to TimeWarner defined as group 2 switchtype = national signalling = pri_cpe context=pstn callerid=asreceived resetinterval = never group = 2 channel => 1-23 #PRI to Norstar Meridian defined as group 3 switchtype = nati...

...and overlapdial=yes nsf=none signalling=pri_net channel => 1-15,17-31 context = default group = 63 ### MFCR2 group=2,12 context=outrt-005-IN_E1P2_PBX_JLB signalling = mfcr2 mfcr2_variant=ph mfcr2_max_ani=10 mfcr2_max_dnis=4 mfcr2_get_ani_first=yes mfcr2_category=national_subscriber mfcr2_logdir=span2 ;mfcr2_call_files=yes channel => 32-46 channel => 48-62 context = default I am not sure if I miss anything in the configuration or there something I need to enable or include in the extensions.conf Any information is much appreciated. Regards, Mac

Firstly, the problem... Ever since I installed and setup asterisk, I have had various problems, initially it was echo caused by the ISDN (isdn4linux) card I was using. So, I upgraded to the X101P from digium. I still had echo, so I figured it was also caused by the ATA186 (cisco) I was using. So, I upgraded again to the TDM40B quad FXS card. This solved pretty much all my problems, except