Hello,
I am in Argentina configuring an E1 in R2 and have some inconveniences.
When the call takes the salient line, I receive an error of signaling.
In * I have loaded the following:
- libr2 installed
- The [ar] in zonedata.c and indications.conf is configured
- zaptel.conf o:
span=1,0,0,ccs,hdb3,crc4
span=2,0,0,cas,hdb3
#span1
bchan=1-15,17-31
dchan=16
#span2
cas=32-62:1001
alaw=1-62
loadzone=ar
defaultzone=ar
- In zapata.conf I configured alone the ISDN.
- Signaling:
06450 0000000 S 0000 1001 H'46 BT27D-2913
06450 0000000 R 0000 1001 H'46 BT27D-2913
14000 0007550 SEIZURE S 0000 1000 H'47 BT27D-2913
14200 0000200 SIG. FAULT R 0000 1001 H'37 BT27D-2913
RECORDING STOPPED PERMANENTLY BY OPERATOR
END
Best Regards...
Leo.
-----------------------------------------------------------------
Obten? tu casilla gratis con 20MB, en: http://www.aconectarse.com
