search for: spa941s

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

I have an a bunch of SPA941 Linksys phones for users in and out of the office. When the phones are in the office (and on the same network as the asterisk server) the WMI goes on when it should and off when it should. But when the phone is on another network and natted it fails to do so. The light always stays off. Has anybody had a similar problem (and hopefully a resolve)?

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 =>

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

Appearently SPA941 is less than a SPA942 without two ports, poe and backlight. There is less features too, it doesn't support BLF. Is it possible to hack 942-software into 941, or is there another workaround? Leif -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091112/0a6cbf82/attachment.htm

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Hi, Is it possible to get the XML config off of a Linksys SPA-941 or 942 phone? I've tried http://[ip address]/admin/spacfg.xml however that file doesn't appear to exist. Thanks.

Hi. We have an odd problem with incoming SIP calls. I have attached a SIP debug log, with some asterisk verbosity as well, demonstrating the problem, below. Is this a known bug? Vital stats: - Asterisk 1.2.3 - Sipura SPA-841, SPA-941 phones - Fedora core 3 The problem manifests itself with these symptoms: - an internal SIP extension receives a call from our PRI - the SIP phone answers the

hi all, just wondering what's happening here: i have a pap2 and an spa941. everytime i call my spa from my pap2 i can see it being added dynamically on the regcontext: [Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer 100100 [Oct 7 11:59:08] -- Added extension '100100' priority 1 to sipregcontext but from spa to pap2 i dont see it, i looked

Hello Folks, I'm an Asterisk newbie, that being said I have managed to get an SPA941 working with 1.2.8. I've got some issues (like getting the voicemail button to work as it should, and making the message indicator light work) but overall I'm pretty happy. I'm now trying to get a PAP2-NA to work. I reset it, have admin access, updated the firmware, and have the same SIP settings

Hi All, I seem to be having a problem with all my VSPs. When I am registering with them I don't seem to be passing my port number. This problem causes other users the inability to call my VoIP number with the VSP. My VSP showed me what they are seeing. I have changed my useragent to be: Linksys/SPA941-4.1.15 Linksys/SPA941-4.1.15 Contact sip:1234321234@aa.bb.cc.dd with no

Hello list, using Asterisk 1.4.30. I want to set the SIP-header Remote-Party-ID to display the name of the calling party on my phone in stead of the number. This is the dialplan : exten => 10,1,NoOp() exten => 10,n,SIPAddHeader(Remote-Party-ID: "eric" <sip:10 at 192.168.1.150>;party=called ) exten => 10,n,Dial(SIP/test2) This is what the CLI shows : /[Jul 12

I'm trying to setup my first Asterisk setup on a CentOS 5 installation on VMWare Workstation 6. Got two Linksys SPA941s working fine. But X-Lite softphones can't answer phone calls, and when one of them calls on of the Linksys phones they "connect" but neither party can hear hear the other. I noticed that the Linksys phones are connected via Native bridging while the X-Lite ones are connected via...

Hi, I have been out of touch with asterisk for quit some time and needed some recommendations. I am looking for SIP hardphone that works well with asterisk server. Pls suggest. cheers /ag -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110212/ccd9d985/attachment.htm>

I'm starting work on some provisioning tools to simplify plugging in and configuring hard SIP handsets and conference bridges (maybe eventually MPEG-4 PoE video cameras that speak SIP as well). Issue is that I'd like to glean as much information out of the configuration files... but don't want to write a whole new parser to do it (especially not one that understands templates and