Displaying 20 results from an estimated 37 matches for "spa941".
Did you mean:
spa942
2006 Apr 04
2
Distinctive Ring on SPA941
Does anyone know how to set the distinctive ring on the Linksys SPA941?
I want to be able to dial one extension and have the phone ring with a
certain tone and then dial another and have the phone ring with a
different tone. I have tried the following
-------------------------------------------------------------------
exten => 802,1,SIPAddHeader(call_info=Classi...
2007 Jun 14
2
Linksys SPA941
Dear Group,
I have just purchased two Linksys SPA941 and flashed these to the latest
firmware.
Everything works well except for the Hold button? Has anyone else
experienced the same issue? What was the solution?
Kind Regards
Shad Mortazavi
2009 May 19
1
SPA941
Hi all,
I'm new to this list, so forgive me if I'm not supposed to ask this:
I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there
any way to use TLS with this phone<--->asterisk (v 1.6.0.9)?
It is said that is supports TLS/SRTP but I don't see any of these
options in the
configuration file or the admin (advanced) SIP conf panel.
Am I missing something?
Thnx in advance ......
2010 Feb 26
1
SPA941 WMI not lighting up when natted
I have an a bunch of SPA941 Linksys phones for users in and out of the
office. When the phones are in the office (and on the same network as
the asterisk server) the WMI goes on when it should and off when it
should. But when the phone is on another network and natted it fails
to do so. The light always stays off. Has...
2010 Nov 16
0
SPA941 WMI not lighting up when natted
Hi,
I'm experiencing the same problem. We have 2 office locations and the
Asterisk server is at one of them. At the other location, all SPA941 access
the Asterisk server over an Internet link. All phones are set to "nat=yes"
at the remote location.
So my problem is that the MWI doesn't work at the remote location. The
Sipsak messages are sent properly, but it's sent to the internet IP of the
remote location so it will n...
2010 May 16
2
Problems with Asterisk and two Linksys SPA941
Hi
I have a big problems on my Asterisk systems :
I have one Asterisk Server with static IP (no nat) and
6 Linksys SPA941.
All SPA are after a router with NAT:
* SPA-1 and SPA-2 are on the same network,
we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router
* SPA-3,
we have a pat 5062 => SPA-3
* SPA-4,
we have a pat 5063 => SPA-4
* SPA-5,...
2006 May 04
0
SPA941 et al LED indications
Hi all.
The SPA941 and friends have pretty multicoloured LEDs, but there doesn't
appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for
extension hinting.
Has anyone managed to get the phone to support this?
Thanks!
--
David Zanetti <david.zanetti@catalyst.net.nz>
Team Leader, Systems Adm...
2009 Mar 17
1
Looking for a patch cable for my SPA941 Phones
Hi all,
i know this question is not directly asterisk related - but i have no
idea where else to ask.
We do have around 50 pieces of LinkSys SPA941 - these phones do have a
2.5mm plug connection - and we do have many many headsets we used with
normal PC's before (so 2x3.5mm plug connection).
Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ?
Or can anyone here tell me where to get good (and not to expensive)
2.5mm p...
2009 May 14
0
Problem with Asterisk 1.4 and Linksys Spa941/962
Hello,
Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1
with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2.
Libpri and dahdi is only for dahdi dummy cause of the meetme function.
After the upgrade we had the problem that some Linksys spa941 phone at
one location could not dial out. incoming calls to the phones works
without any problem, but outbound the phone hangs up the call after its
connected to the other side. Sip debug shows me the following scenario:
-> invite
<- 407 proxy authorisation
-> ACK
-> Invite with auth h...
2009 Nov 12
1
BLF with SPA941?
Appearently SPA941 is less than a SPA942 without two ports, poe and backlight.
There is less features too, it doesn't support BLF.
Is it possible to hack 942-software into 941, or is there another workaround?
Leif
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digi...
2007 Mar 27
1
Using server side phonebook directory with SPA941
...so that when this party calls a "textual" caller ID will
be displayed on the phone display.
2. How can this be configured with Trixbox, I've looked at the
configuration options - I assume it plays no difference me basing it
on mysql or astdb?
3. What protocol does the phone (Linksys SPA941) talks to the
asterisk server to retrieve this information ?
4. Has someone done this? What softphone should I use to test it first
(I'm connecting it with outlook, so it has to be win* software)
Thanks for helping,
Maxim.
--
Cheers,
Maxim Veksler
"Free as in Freedom" - Do u GN...
2008 Mar 19
1
Getting config from SPA-941 or 942 phones
Hi,
Is it possible to get the XML config off of a Linksys SPA-941 or 942 phone?
I've tried http://[ip address]/admin/spacfg.xml however that file
doesn't appear to exist.
Thanks.
2006 Mar 30
0
SIP: INFO before answer causes disconnect
...om 10.11.220.128:5060:
SIP/2.0 100 Trying
To: <sip:sip_alan@alan.phone>
From: "XXXXXXXXXX" <sip:XXXXXXXXXX@10.11.220.1>;tag=as44f0e411
Call-ID: 1536d1554749f3957bdfebb548bcf9b7@10.11.220.1
CSeq: 102 INVITE
Via: SIP/2.0/UDP 10.11.220.1:5060;branch=z9hG4bK14f2d730
Server: Sipura/SPA941-4.1.8
Content-Length: 0
--- (8 headers 0 lines)---
<-- SIP read from 10.11.220.128:5060:
SIP/2.0 180 Ringing
To: <sip:sip_alan@alan.phone>;tag=18a7e97964d74b16i0
From: "XXXXXXXXXX" <sip:XXXXXXXXXX@10.11.220.1>;tag=as44f0e411
Call-ID: 1536d1554749f3957bdfebb548bcf9b7@10.1...
2008 Oct 07
1
regcontext
hi all,
just wondering what's happening here:
i have a pap2 and an spa941. everytime i call my spa from my pap2 i can
see it being added dynamically on the regcontext:
[Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer
100100
[Oct 7 11:59:08] -- Added extension '100100' priority 1 to
sipregcontext
but from spa to pap2 i...
2006 May 31
2
PAP2-NA Authentication Issues
Hello Folks,
I'm an Asterisk newbie, that being said I have managed to get an
SPA941 working with 1.2.8. I've got some issues (like getting the
voicemail button to work as it should, and making the message
indicator light work) but overall I'm pretty happy.
I'm now trying to get a PAP2-NA to work. I reset it, have admin
access, updated the firmware, and have the same S...
2007 Jan 12
1
Not Registering Port with VSP.
...seem to be having a problem with all my VSPs. When I am registering
with them I don't seem to be passing my port number. This problem
causes other users the inability to call my VoIP number with the VSP.
My VSP showed me what they are seeing.
I have changed my useragent to be: Linksys/SPA941-4.1.15
Linksys/SPA941-4.1.15 Contact sip:1234321234@aa.bb.cc.dd with no port
address.
They are telling me because I am not registering my port number with
them they are unable to pass a call to me.
My end shows that I am registered. Outbound calls are fine; inbound
calls are not receiv...
2010 Jul 12
4
Remote-Party-ID party=called
...at 192.168.1.150>
*Remote-Party-ID: "test 6"
<sip:test6 at 192.168.1.150>;screen=yes;party=calling*
Call-ID: fb31bee7-94a6a451 at 192.168.1.104
CSeq: 101 INVITE
Max-Forwards: 70
Contact: "test 6" <sip:test6 at 192.168.1.104:5063>
Expires: 240
User-Agent: Linksys/SPA941-5.1.8
Content-Length: 397
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
Content-Type: application/sdp/
In all the other SIP-messages there is no trace of the Remote-Party-ID
header...
Shouldn't there be a /*Remote-Party-ID: "eric"
<sip:10 at...
2007 Jun 20
1
X-Lite problems on basic asterisk setup
I'm trying to setup my first Asterisk setup on a CentOS 5 installation
on VMWare Workstation 6. Got two Linksys SPA941s working fine. But
X-Lite softphones can't answer phone calls, and when one of them calls
on of the Linksys phones they "connect" but neither party can hear hear
the other. I noticed that the Linksys phones are connected via Native
bridging while the X-Lite ones are connected vi...
2011 Feb 12
11
SIP Hardphone that works well with asterisk
Hi,
I have been out of touch with asterisk for quit some time and needed some
recommendations. I am looking for SIP hardphone that works well with
asterisk server.
Pls suggest.
cheers
/ag
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110212/ccd9d985/attachment.htm>
2007 Dec 07
3
Using XML for configuration management, single-source-of-truth, etc.
...on't want to write a whole new parser to do
it (especially not one that understands templates and macros).
For instance, from the voicemail.conf, extensions.conf, and sip.conf
files, I should be able to generate 90% of the configuration state
needed for provisioning an out-of-the-box Sipura SPA941... if only
those files were in some more parsable format, like XML.
How much effort would it be to add an application that traverses the
configuration state and writes it out as an XML flat file?
Or perhaps at some point in the future, Asterisk's configuration files
could be represented a...