Displaying 6 results from an estimated 6 matches for "smx1000".
2020 May 15
0
NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04
On 5/15/20 12:13 PM, Yogesh Bhanu wrote:
> [...]
> # Is it possible to calculate /estimate how much time is left when on
> battery ?
When the UPS does not report that, you can ask nut to provide an
estimate by using the runtimecal directive. For instance I have in
ups.conf on a system where I use an Inform low-end UPS:
runtimecal = 120,100,480,50
2020 May 19
0
NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04
On 5/19/20 10:39 AM, Yogesh Bhanu wrote:
> Hi Manuel et.al,
>
> Going thru the documentation -- it seems this configuration specific
> to blazer_ups.
> https://networkupstools.org/docs/man/blazer_usb.html
>
> Kind Regards,
Other drivrs support that option as well. Here is a quote from the same
config as before:
[guardian]
driver = nutdrv_qx
port = auto
2020 May 20
1
NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04
Hi Mauel,
No dice. The config does not show up
config:
--8<--
[tripp]
driver = usbhid-ups
port = auto
vendorid = 09ae
productid = 2009
bus = 001
desc = "Tripp Lite SMX1000LCD"
runtimecal = 660,100,180,50
-->8--
output:
--8<--
upsc tripp
Init SSL without certificate database
battery.charge: 100
battery.runtime: 736
battery.type: PbAc
battery.voltage: 13.5
battery.voltage.nominal: 12.0
device.mfr: Tripp Lite
device.model: TRIPP LITE UPS
device.serial:...
2020 May 19
2
NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04
Hi Manuel et.al,
Going thru the documentation -- it seems this configuration specific
to blazer_ups.
https://networkupstools.org/docs/man/blazer_usb.html
Kind Regards,
Yogesh
On Fri, May 15, 2020 at 12:53 PM Manuel Wolfshant
<wolfy at nobugconsulting.ro> wrote:
>
> On 5/15/20 12:13 PM, Yogesh Bhanu wrote:
> > [...]
> > # Is it possible to calculate /estimate how much
2020 May 15
4
NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04
Hi,
This is a newbie post so please bear with me.
After loosing my router to a random Subminute outage. I looked around
for a fanless UPS and bought Tripp Lite SMX1000LCD
The above constellation works. But I have some questions about outputs.
Please see attache nut report for the config.
upsc output:
--8<--
fourpi01:~# upsc tripp
Init SSL without certificate database
battery.charge: 100
battery.runtime: 4050
battery.type: PbAc
battery.voltage: 13.5
battery.v...
2011 Feb 04
1
nut unable to communicate with new APC SMX100 over USB
I'm trying to set up nut-2.6 with a SMX1000 ups unit from APC on a
CentOS 4.8 server. It's connected via USB, and Linux has detected it as
a HID device. Nut was built from source code.
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 21 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=051d Pro...