search for: seizur

...ng to figure out how to carry out a Poisson regression fit to longitudinal data with a gamma distribution with unknown shape and scale parameters. I've tried the 'lmer4' package's glmer() function, which fits the Poisson regression using: library('lme4') fit5<- glmer(seizures ~ time + progabide + timeXprog + offset(lnPeriod) + (1|id), data=pdata, nAGQ=1, family=poisson) #note: can't use nAGQ>1, not yet implemented summary(fit5) Here 'seizures' is a count and 'id' is the subject number. This fit works, but uses the Poisson distribution wit...

...a long time. Other usages of this status are the DCMS specific blockings: "DCMS Out of Service", "Pilot Alarm" or "Analog Carrier Failure". This status may also be set for a short time when performing DIU tests. In that case it prevents outgoing seizures. BBAC BLOCKED BACKWARD The GP reports the subscriber port with BBAC if a subscriber goes off-hook and does not dial or if a subscriber does not go off-hook during a set-up connenction. After further three minutes the status of this port is changed to BPRM. BPRM BLO...

...al Tone: None | Yes-Precise | Yes-SCC Framing: SF | ESF (I'm assuming ESF) Line Coding: AMI | B8ZS Signaling Start: Ground Start | E&M | Loop Start w/ring | Loop Start w/o ring (which of these does kewlstart deal with?) Pulse Mode: DTMF | MF (I assume DTMF) Outpulse Mode: Wink | Immediate | Seizure (If Seizure, then Origination or Digit Collection) Will ANI delivery be required for Toll-Free service? (I'm assuming Yes if we want to pass our caller id?) Thanks a ton for your time, JT

...questions about how I want to configure the line. Here goes: 1. Dial Tone - No, Yes - Precise, Yes - SCC 2. Framing - SF, ESF 3. Line Coding - AMI, B8ZS 4. Signaling Type - Ground Start, E&M, Loop Start w/Ring, Loop Start w/o Ring 5. Pulse Mode - DTMF, MF 6. Outpulse Start - Wink, Immediate, Seizure 7. If Seizure then - Origination, Digit Collection. I'm not sure of the correct answers to any of these. I do know that I want to be able to get caller ID and the number dialed for the application that I'm building. I think from other things I've read on the list that I want B8ZS...

...eturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no answeronpolarityswitch=yes I use asterisk 1.6.2 and sangoma a400 fxo ports. Then i try call i get chan_dahdi.c: Ignore possible polarity reversal on line seizure

...al Tone: None | Yes-Precise | Yes-SCC Framing: SF | ESF (I'm assuming ESF) Line Coding: AMI | B8ZS Signaling Start: Ground Start | E&M | Loop Start w/ring | Loop Start w/o ring (which of these does kewlstart deal with?) Pulse Mode: DTMF | MF (I assume DTMF) Outpulse Mode: Wink | Immediate | Seizure (If Seizure, then Origination or Digit Collection) Will ANI delivery be required for Toll-Free service? (I'm assuming Yes if we want to pass our caller id?) Thanks a ton for your time, JT

? stato filtrato un testo allegato il cui set di caratteri non era indicato... Nome: non disponibile Url: https://stat.ethz.ch/pipermail/r-help/attachments/20070905/6d1002c1/attachment.pl

ive read the FAQ and saw that a common problem with emulating games is system freezes/seizures. i followed the FAQ and re-installed my graphics drivers with no success. i think i must be missing something when trying to run wine, but i dont know what it is because this is my first ever Linux install. i cannot run any type of .exe without it freezing my system entirely- i have to restart it...

...ommand completed successfully' So I have passed the test right? WRONG! Here's what happens when I try and do something with the new X: drive I change to drive x: and get >x: then I type DIR (and yes I type a carriage return in case some nitpicker thinks I jest) The result: W95 full seizure after a partial listing (yes, only some) of the files in /tmp The ONLY solution I have found for this seizure is a full power off reboot. (I have waited as long as a half hour to let W95 sort it all out. Perhaps the 'W95 team' can let me know if that's long enough) Same problem with...

Hi, I'm seeing rather odd behaviour on a new box with TE110P card. I'm running the TE110P span with ccs,hdb3,crc4 in pri_net, connected to a second machine with a TE410P in pri_cpe. The span is idle. I'm using pri intense debug span 1 and can see the RRs going back and forth. So - things are running along with the span showing "Provisioned, Up, Active" in pri show

...e for about 600(+/- 50) calls then the Manager is suddenly unable to launch calls. Using ZapBarge to listen to the channels themselves you can hear the dtmf digits being dialed, but then either there is dialtone (again), or a fast busy signal. I've also noticed(via ZapBarge) that before the T1 seizure that the call launched will immediately go to an automated message claiming that not enough digits have been dialed. The rest of the T1's become useless right after it. Once the T1's get into this state, even trying to launch a call directly through the dialplan experiences the same behav...

...the DLLs that the default installation names are builtin, native. I've tried running it with 'winedbg --gdb civilization3', and it always hangs when it tries to start sound (Now would be a good time to mention that the sound when I run in Win98 sounds like it's having an epileptic seizure). It starts out loading ntdll, kernel32, advapi, gdi32, user32, crtdll, glu32, dciman32, opengl32, winmm, shlwapi, comctl32, shell32, comdlg32, and x11drv, in that order, all from C:\windows\system, without errors beyond complaining about not having a .dbg file available. Then it gets a GDI error...

I'm just curious if anyone has the X100P & Callerid receiving working outside US. Replies are appreciated. Also if it's not working for you in a certain coutry you can respond too. regards Martin

...B Xmt Busy Tone ::::::::: B-3 Group B Rcv Idle Tones :::::::: B-2 & B-3 Group B Rcv Busy Tones :::::::: B-1 & B-2 ANI Request ::::::::::::::::::: Do not request ANI ANI Length ANI Category Request Tone ANI Tone Request ANI Category :::::::::::::::::: I-1 ANI Calling Party Category :::: II-1 Seizure Ack Timeout ::::::::::: 150ms Release Guard Timeout ::::::::: 600ms * Always double-check the DNIS length with your carrier *************************************************** example of inopportune disconnection: Jan 17 10:04:17 WARNING[-1120736336]: chan_unicall.c:634 unicall_error: UniCall: m...

...sts.digium.com > > Subject: Re: [Asterisk-Users] Digium FXO Interfaces don't support > > groundstart??? > > > > He who knows not that he knows not, knows little; he who knows that he > knows > > not, knows a lot. > > > > 1. Glare is the simultaneous seizure of a common facility using two > > separate independent universes whereby a decision at one end is not > > immediately know to the other. As mentioned previously, because any two > > points that are not the same in space are separated in distance, they are > > necessarily...

...clusive |______________________________________________________________________________ In Asterisk I see: Oct 30 11:48:02 VERBOSE[11329] logger.c: -- Accepting call from '7034' to '1004' on channel 1/27, span 1 If I change the Alcatel 87 prefix to use "ARS Prof.Trg Grp Seizure" (without overlap) then I get the following trace: ______________________________________________________________________________ | (488410:000060) 1093: Send_IO1 (link-nbr=19, sapi=0, tei=0) : | long: 55 desti: 0 source: 15 cryst: 0 cpl: 19 us: 8 term: 0 type a5 | tei: 0 <<&l...

...in a bloody shoot-out by one of his bodyguards a day before we were schedule to travel out of Congo, We immediately decided to put the funds into a private security company here in Congo for safe keeping. The security of the said amount is presently being threatened here following the arrest and seizure of properties of Col. Rasheidi Karesava (One of the aides to Laurent Kabila) a tribesman, and some other Military Personnel from our same tribe, by the new President of the Democratic Republic of Congo, the son of late President Laurent Kabila, Joseph Kabila. In view of this, we need a reliabl...

...effects, there are more parameters than observations. When I try to run the following code, I get an error saying: "Error in mer_finalize(ans) : q = 295 > n = 236". require (lme4) require (glmmAK) data(epilepticBC) dat = epilepticBC dat$rand=1:nrow(dat) dat$V4=dat$visit==4 formula1 = Seizure ~ Base + Trt + I(Trt*Base) + Age + V4 fit=lmer (update (formula1, .~. + (1|id) + (1|rand)), family=poisson, data=dat, nAGQ=1) Is it true that there is no way to fit such a model in an ML analysis? In other words, is there a way to approximate the likelihood of fixed effects and variance component...

...17-31 dchan=16 #span2 cas=32-62:1001 alaw=1-62 loadzone=ar defaultzone=ar - In zapata.conf I configured alone the ISDN. - Signaling: 06450 0000000 S 0000 1001 H'46 BT27D-2913 06450 0000000 R 0000 1001 H'46 BT27D-2913 14000 0007550 SEIZURE S 0000 1000 H'47 BT27D-2913 14200 0000200 SIG. FAULT R 0000 1001 H'37 BT27D-2913 RECORDING STOPPED PERMANENTLY BY OPERATOR END Best Regards... Leo. ----------------------------------------------------...

...sing CAMA signaling. On a Cisco, you can see the configuration types that I'm referring to on this site as an example: http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a008019b16e.html#35393 The example of the interaction is the following: CLEC end office: Seizure 9-1-1 Tandem: Wink CLEC end office: KP (Keypulse) NPA ST (Start) 9-1-1 Tandem: Wink CLEC end office: KP I (Info Digit) NXX XXXX ST The call is originating from the VoIP side. I have calling and called number in the SIP invite. For the life of me, I can't figure out how to pulse out the d...