search for: scsi3

Hi, I created an HVM type virtual machine and installed RHEL5U7 guest in it. I have assigned 7 scsi disks to the virtual machine in physical mode (using phy:), however, I see those disks are xvd and not as scsi. Is anyone aware what the problem might be ? Please let me know what kind of information do I need to post in order to narrow down to the problem. Thanks, K

...C S: Product=CA-200 S: SerialNumber=0000020307B2 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb- storage E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms and /var/log/dmesg still shows: <...> scsi3 : SCSI emulation for USB Mass Storage devices Vendor: TEAC Model: USB HS-CF Card Rev: 4.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0 USB Mass Storage device found at 7 <...> Instead of (if i...

...P to complete... > > > > Until here it''s alle fine, but then: > > > > qla2300 0000:05:01.0: LIP reset occured (f7f7). > > qla2300 0000:05:01.0: LOOP UP detected (2 Gbps). > > qla2300 0000:05:01.0: Topology - (F_Port), Host Loop address 0xffff > > scsi3 : qla2xxx > > qla2300 0000:04:02.0: > > QLogic Fibre Channel HBA Driver: 8.01.00b5-k > > QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel > > ISP2312: PCI-X (100 MHz) @ 0000:05:01.0 hdma+, host#=3, > > fw=3.03.15 IPX Loading kernel/fs/reiserfs/reiserfs.ko W...

...P to complete... > > > > Until here it''s alle fine, but then: > > > > qla2300 0000:05:01.0: LIP reset occured (f7f7). > > qla2300 0000:05:01.0: LOOP UP detected (2 Gbps). > > qla2300 0000:05:01.0: Topology - (F_Port), Host Loop address 0xffff > > scsi3 : qla2xxx > > qla2300 0000:04:02.0: > > QLogic Fibre Channel HBA Driver: 8.01.00b5-k > > QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel > > ISP2312: PCI-X (100 MHz) @ 0000:05:01.0 hdma+, host#=3, > > fw=3.03.15 IPX Loading kernel/fs/reiserfs/reiserfs.ko W...

I'm interested in the idea of sharing a bunch of SAS JBOD devices between two CentOS servers in an active-standby HA cluster sort of arrangement, and found something about using scsi3 persistent reservations as a fencing method. I'm not finding a lot of specifics about how this works, or how you configure two initiator systems on a SAS chain. I don't have any suitable hardware for running any tests or evaluations yet. general idea: 2 centos servers each with 8...

...the usbdisk now. If I plug it into my laptop (FC4) I can access it without any problems. When I plug it into the server I get: Aug 30 15:47:22 porky kernel: ohci_hcd 0000:00:0f.2: wakeup Aug 30 15:47:22 porky kernel: usb 1-2: new full speed USB device using address 3 Aug 30 15:47:22 porky kernel: scsi3 : SCSI emulation for USB Mass Storage devices Aug 30 15:47:22 porky kernel: Vendor: WDC WD16 Model: 00JB-00GVA0 Rev: 0 0 Aug 30 15:47:22 porky kernel: Type: Direct-Access ANSI SCSI revision: 02 Aug 30 15:47:22 porky kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) Aug 30...

Hi All, Two and three-node clusters with SC3.2 and S10u3 (120011-14). If a node is rebooted when using SCSI3-PGR the node is not able to take the zpool by HAStoragePlus due to reservation conflict. SCSI2-PGRE is okay. Using the same SAN-LUN:s in a metaset (SVM) and HAStoragePlus works okay with PGR and PGRE. (both SMI and EFI-labled disks) If using scshutdown and restart all nodes then it will work. Also...

...v/sdc1 partition exists AND is mountable. Is there a method to re-create the /dev/sdc device? I cannot dd or fdisk it, obviously, but I can mount the /dev/sdc1 partition and it works just fine. Not having the /dev/sdc is messing up my multipath setup (let alone whatever else might be affected). scsi3 : SFNet iSCSI driver Vendor: EQLOGIC Model: 100E-00 Rev: 2.3 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 8417280 512-byte hdwr sectors (4310 MB) SCSI device sdc: drive cache: write through SCSI device sdc: 8417280 512-byte hdwr sectors (4310 MB...

...o i cannot see other partitions than sda. --------------------------------------------------------------------------------- QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 24 (level, low) -> IRQ 185 qla2300 0000:04:02.0: Found an ISP2312, irq 185, iobase 0xf8840000 scsi3 : qla2xxx qla2300 0000:04:02.0: Configuring PCI space... qla2300 0000:04:02.0: Configure NVRAM parameters... qla2300 0000:04:02.0: Verifying loaded RISC code... qla2300 0000:04:02.0: Waiting for LIP to complete... qla2300 0000:04:02.0: LIP reset occured (f7f7). qla2300 0000:04:02.0: LOOP UP detecte...

...ppend initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 video=vesa vga=791 rw root=/dev/ram ZILIX_KERNEL=scsi.s label scsi2.s kernel Kernels/scsi2.s/bzImage append initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 rw root=/dev/ram ZILIX_KERNEL=scsi2.s label scsi3.s kernel Kernels/scsi3.s/bzImage append initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 rw root=/dev/ram ZILIX_KERNEL=scsi3.s label speakup.s kernel Kernels/speakup.s/bzImage append initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=8192 rw root=/dev/ram ZI...

...0 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: IBM Model: ULTRIUM-TD2 Rev: 37RH Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi3 Channel: 01 Id: 06 Lun: 00 Vendor: PE/PV Model: 1x8 SCSI BP Rev: 1.1 Type: Processor ANSI SCSI revision: 02 Host: scsi3 Channel: 02 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD0 RAID5 39760R Rev: 350O Type: Direct-Access ANSI SCSI revision:...

...d is based on the nVidia MPC55 Pro and NEC uPD720400 chipsets. It has an on-board Adaptec AIC-7902W dual-channel SCSI controller and companion Zero-Channel RAID card. It has twin AMD Opteron HE processors and 32GB of registered ECC DDR2 memory. The RAID array is populated with ten Fujitsu 300GB 15K SCSI3 drives. I took it into a friendly Linux shop where they reviewed / verified all of my work and confirmed the boot-time problem. Two hours into the effort, my friend plugged in a bootable Windows 10 thumb drive and to our amazement, it came up very normally. So did another thumb drive with a Fedora...

...orage Jun 15 18:41:37 tesla kernel: [ 914.864033] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD_GCC-T10N 1.01 PQ: 0 ANSI: 0 Jun 15 18:41:37 tesla kernel: scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD_GCC-T10N 1.01 PQ: 0 ANSI: 0 Jun 15 18:41:37 tesla kernel: [ 914.867503] sr 6:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Jun 15 18:41:37 tesla kernel: [ 914.867517] cdrom: Uniform CD-ROM driver Revision: 3.20 Jun 15 18:41:37 tesla kernel: [ 914.867814] sr 6:0:0:0: Attached scsi generic sg2 type 5 Jun 15 18:41:37 tesla kernel: sr 6:0:0:0: [sr0] scsi3-mmc drive: 2...

...insert any usb storage device. ###################################################### May 23 12:24:02 localhost kernel: usb 1-4: new high speed USB device using ehci_hcd and address 4 May 23 12:24:02 localhost kernel: usb 1-4: configuration #1 chosen from 1 choice May 23 12:24:02 localhost kernel: scsi3 : SCSI emulation for USB Mass Storage devices May 23 12:24:07 localhost kernel: scsi 3:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS May 23 12:24:07 localhost kernel: sd 3:0:0:0: [sdb] 1981440 512-byte hardware sectors (1014 MB) May 23 12:24:07 localhost kernel: sd 3:0:0:0: [...

...ink [APSJ] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:11.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE400 irq 201 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE408 irq 201 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) Varian

...rnel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) Jul 26 16:29:27 sauron kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 26 16:29:27 sauron kernel: scsi2 : ahci Jul 26 16:29:27 sauron kernel: ata2: SATA link down (SStatus 0 SControl 300) Jul 26 16:29:27 sauron kernel: scsi3 : ahci Jul 26 16:29:27 sauron kernel: ata3: SATA link down (SStatus 0 SControl 300) Jul 26 16:29:27 sauron kernel: scsi4 : ahci Jul 26 16:29:27 sauron kernel: ata4: SATA link down (SStatus 0 SControl 300) Jul 26 16:29:27 sauron kernel: scsi5 : ahci Jul 26 16:29:28 sauron kernel: ata5: SATA link dow...

...MB) sdc: assuming drive cache: write through SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) sdc: assuming drive cache: write through sdc: sdc1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 USB Mass Storage device found at 4 usb 1-5: new high speed USB device using address 5 scsi3 : SCSI emulation for USB Mass Storage devices Vendor: IOMEGA Model: CDRW64892EXT3-B Rev: 6OP1 Type: CD-ROM ANSI SCSI revision: 02 USB Mass Storage device found at 5 sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr0 at scsi3...

When I try to burn anything to cd, I get a message to insert a CD large enough for my file (normally an ISO image). Doesn't matter if the iso image is a 600Mb Centos ISO or a 48Mb DSL ISO. Same warning. My CD-Rs are Memorex 700MB/80min 52x disks that work just fine on XP systems. So what am I missing configuration-wise?

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

...messages tells me this: Mar 10 13:06:22 jeff kernel: sd 1:0:0:0: Attached scsi disk sda Mar 10 13:06:22 jeff kernel: Vendor: ASUS Model: DRW-20B1ST Rev: 1 .00 Mar 10 13:06:22 jeff kernel: Type: CD-ROM ANSI S CSI revision: 05 dmesg tells me this: sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 What am I doing wrong here? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com