search for: scasni

I believe it is not fiber, but I am not sure. I am going to take one of them home tonight and hook it to my POTS line there, which for sure is not fiber. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Michael Welter Sent:

All, I need help. I have an (actually 2) Adtran TA750's with 8 FXO ports. I get a terrible buzz on every FXO port. If I unplug the Adtran and put an analog phone on each incoming line, I have no buzz. I also have 2 Carrier Access Access Bank I's with 12 FXO ports. When I plug the same analog lines into either one of those, no noise or buzz whatsoever. I went so far as to move the TA750

Check the Redirection on the web interface of your Snom 200. If it says "When Busy" that's your problem. It should say "Never". Also make sure on Sip->Lines your line appearance says "All" or else you will have the same problem. Hope this helps :) Greg Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original

Jay, I have had a lot of trouble with the FXO ports on Adtran TA750. Unless the incoming POTS lines have a balance impedance, they will buzz very bad. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Sunday, April

I am perplexed by this so I how someone can help me out. On one of my servers the users began complaining that if they picked up a parked call they could not use the # key to transfer the call. This is a particualarly annoying issue since everyone has been taught to use #700 to park calls. At first I thought it was a DTMF issue with the polycom phones, since rebooting seemed to fix the problem.

I am surprised you needed to turn the rxgain down so much, usually it is just the opposite. I experienced the same problem you did when my txgain was too low. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of bam Sent: Friday, May

Run /usr/src/zaptel/ztmonitor 32 -v And adjust your gains in /etc/asterisk/zapata.conf accordingly. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of bam Sent: Friday, May 07, 2004 3:35 AM To: asterisk-users@lists.digium.com

Hi All I have a snom 200 phone here which works perfectly when using the handset to playback the voicemail messages etc. However when I play back the voice using the speakerphone it sounds choppy. Anyone had this problem before? Regards Mark

All, Experiencing some issues on my FXO lines. If a call comes in on an FXO and then get transferred to another FXO (say to call someones cell phone), those two lines will stay tied together indefinitely. This happens to us when we transfer an incoming call to our on call guys after hours and on weekends. We have installed 3 other * boxes and they do the same thing. We use a Adit Channel bank

Rich, Thanks a bunch, totally understand now and that actually makes total sense. (no need for schematics). This also explains why I used an TA750 to go into a Nortel MICS system, using FXO and no buzz. Totally balanced load from the analog ports on the Nortel across the 5 feet of CAT5 to the FXO on the adtran. Now I need to get rid of some Adtrans --- Anyone lookin to buy? :) Thanks

That does work, I use that same approach to get analog extensions in a norstar system to dial a specific sip phone in *. Works really well. We then also tie the calleridname to which channel they dial out from as well. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com

Greetings, I have a new * system installed and everything works as it should except for one annoying little problem: I can't play any sound files. What this means is that when an extension script gets to the point where it should play a sound file (voicemail greeting, auto-attendant, whatever), the caller hears a click and then silence. According to the * log, the sound file is being

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Gordon Henderson > Sent: Friday, February 09, 2007 9:47 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Conferencing Phones ... > > > Anyone got any experiences of good quality

I'm running Asterisk CVS-HEAD-05/24/04-17:37:48 on kernel 2.4.25-gentoo-r3. I have a Digium TDM-400P card with 4 FXO ports. Here are the pertinent files: zaptel.conf: fxsks=1-4 loadzone = us defaultzone=us zapata.conf: [channels] context=north_in_pots_vip group=1 signalling=fxs_ks usecallerid=no hidecallerid=no callwaiting=no restrictcid=no threewaycalling=no echocancel=1

Set busydetect=no in your zapata.conf file. That should stop the random hang-ups. If you really need busy detection, try setting busycount=8 or even 10. If you still get random hang-ups, turn off busy detection and turn on call progress. May help the situation. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From:

Hey all, I have a situation where I have 8 lines from the phone company in a hunt group coming in to my asterisk box. These are the same lines I'm using for outgoing calls ( named g0 ). The problem arises when someone dials our number at the same time asterisk tries to put a call out on one of the zap channels in the g0 group. This has happened twice that I know of so far, once to

I need a good reliable source for channel banks. Ebay is nice but too many variations of quality. I need one that can do 8 FXO and 16 FxS does anyone have a particular model, other than adtran that they can recommend??? And if possible include a source to buy from... Thanks in advance, Alex -------------- next part -------------- An HTML attachment was scrubbed... URL: