asterisk users - May 2004 - Missing digits on TDM400P incomplete dial string - Email found in subject

Run /usr/src/zaptel/ztmonitor 32 -v 
And adjust your gains in /etc/asterisk/zapata.conf accordingly.

Gregory P. Scasny

Golden Technologies Inc.

http://www.golden-tech.com

219-462-7200

-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of bam
Sent: Friday, May 07, 2004 3:35 AM
To: asterisk-users@lists.digium.com
Subject: [SPAM] - [Asterisk-Users] Missing digits on TDM400P incomplete
dial string - Email found in subject

We are experiencing problems on a FXS interface where the client is
dialing 
numbers, but digits are being dropped somewhere from the dial string. 
Typically one or two digits are not being presented. We've tried
different 
handsets to no avail, and I am assuming that it is some sort of timing
problem.

Are there any parameters I can tweak to try and rectify this?


zapata.conf

context=hardwire
group=3
signalling=fxo_ks
mailbox=8765
callerid="Acme" <8765>
channel=32




extensions.conf

[hardwire]
;
exten => _NXXXXXX,1,SetCallerID(0141411${CALLERIDNUM})
exten => _NXXXXXX,2,CallingPres(3)
exten => _NXXXXXX,3,Dial(Zap/g1/0141${EXTEN})

exten => _0.,1,SetCallerID(0141411${CALLERIDNUM})
exten => _0.,2,CallingPres(3)
exten => _0.,3,Dial(Zap/g1/${EXTEN})

exten => t,1,Hangup                     ; If they take too long, give
up.
exten => i,1,Hangup                     ; If they get it wrong, give up 


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

I've  had a quick fiddle to little avail, the readings looked prey good to 
be honest before I started fiddling. Looking a little closer it appears 
that it is the digit "1" that is being lost more that any other.



At 15:25 07/05/04, you wrote:
>Run /usr/src/zaptel/ztmonitor 32 -v
>And adjust your gains in /etc/asterisk/zapata.conf accordingly.
>
>Gregory P. Scasny
>
>Golden Technologies Inc.
>
>http://www.golden-tech.com
>
>219-462-7200
>
>-----Original Message-----
>From: asterisk-users-admin@lists.digium.com
>[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of bam
>Sent: Friday, May 07, 2004 3:35 AM
>To: asterisk-users@lists.digium.com
>Subject: [SPAM] - [Asterisk-Users] Missing digits on TDM400P incomplete
>dial string - Email found in subject
>
>We are experiencing problems on a FXS interface where the client is
>dialing
>numbers, but digits are being dropped somewhere from the dial string.
>Typically one or two digits are not being presented. We've tried
>different
>handsets to no avail, and I am assuming that it is some sort of timing
>problem.
>
>Are there any parameters I can tweak to try and rectify this?
>
>
>zapata.conf
>
>context=hardwire
>group=3
>signalling=fxo_ks
>mailbox=8765
>callerid="Acme" <8765>
>channel=32
>
>
>
>
>extensions.conf
>
>[hardwire]
>;
>exten => _NXXXXXX,1,SetCallerID(0141411${CALLERIDNUM})
>exten => _NXXXXXX,2,CallingPres(3)
>exten => _NXXXXXX,3,Dial(Zap/g1/0141${EXTEN})
>
>exten => _0.,1,SetCallerID(0141411${CALLERIDNUM})
>exten => _0.,2,CallingPres(3)
>exten => _0.,3,Dial(Zap/g1/${EXTEN})
>
>exten => t,1,Hangup                     ; If they take too long, give
>up.
>exten => i,1,Hangup                     ; If they get it wrong, give up
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users