search for: risers

.... - Get a PCI-E riser. The riser option I like, except I also have the BBU unit for my RAID card meaning I need to ensure that I have enough clearance and support for it when the card is mounted horizontally. You can mount the battery elsewhere, but not the logic module... Most of the PCI-E 8x risers I've seen out there seem to be pretty small profile and I'm not sure if they'd give the clearance needed (see the Supermicro provided CSE-RR1U-E8). It looks like I need around 35mm of clearance to get the card in sideways with the BBU attached... Another solid option would looke to be...

Hi, folks, I'm installing a RAID controller card for a large external RAID box in a Dell server. I've got two riser slots available. Here's the question: the controller card has some large chips on one side, and if I put it in riser 1, those chips face downwards in the box, blocking ease of cooling, while if I put it in riser 2, the chips will face up... but be right over a large

From: Lee W <centos-list at unassemble.co.uk> > Shouldn't be a problem as it's probably going in a 1U Rack case > with a Riser/extender card. Be sure to hit the 3Ware site to read about _incompatible_ risers! At 66+MHz PCI/PCI-X signaling, many cards/risers have issues. Many are only designed for 33MHz. -- Bryan J. Smith mailto:b.j.smith at ieee.org

I have a TDM400p with 3 fxs and 1 fxo daughter cards. It's in a mini-itx case with a 'right-angle' PCI riser card so the TDM400p is 'sandwiched' between the Atom D525 CPU and the 2.5" hard drive. I'm getting a bunch of clicks and pops on all ports. Has anybody had a similar experience? Did you find a solution? -- Thanks in advance,

Hello all this is my first post to this list so i would like to than you all in advance for your time and consideration. I am in the process of building a new server and have purchased some used hardware. There seems to be some hardware issuses and i am hoping nothing was damaged during shipping. However i am in contact with intel and we are tring to figure out the exact problem via email. So

Hello I'd like to build myself an Asterisk server for SOHO use. Intel's D201GLY2 motherboard (http://tinyurl.com/ddarzp) looks like a very good deal, but I'm concerned about two things: 1. Will an A400P (from OpenVox, but supposed to be Digium-compatible http://tinyurl.com/ck6nfu) fit with a PCI riser, or will the CPU heatsink/fan be in the way? I downloaded the PDF from

Hi, folks, Since I've gotten a total of one response in days on the HP forum, maybe the collective mind here has an answer.... As I've mentioned in other posts, we have an HP dl580 g5 that started throwing ECC errors. But wait, it's worse: memory is mirrored.... And the thing is fully populated with 32 DIMMs. I took my best guess, pulled the matching set of DIMMs, and took two

Hello, Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot. http://www.voip-info.org/wiki/view/Asterisk+hardware We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.

The systems will be operating the Center 5.2 32-bit, below the model, one will doubt that the system of controlling the media to do a RAID 0+1 PowerEdge SC1435 Processor AMD Opteron ? 2344HE Quad Core (1.7 GHz, 4x512 KB L2 cache, 1 GHz HyperTransport) - BRH8835 edit Memory 8GB Memory, 667MHz (4x2GB), Single Ranked Primary controller Integrated SATA Controller - No RAID edit First Hard Drive SAS

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 49 bytes Desc: bullet.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050125/1dbc7ddf/attachment.gif

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

Hello For those SOHO customers (ie. at most, a couple of POTS/ISDN connections and simultaneous SIP calls) who'd rather not use a big, noisy PC to run Asterisk, I'd like to offer an alternative that has the following features: - not old hardware sold on eBay, ie. it must be up-to-date hardware sold by a company currently in business - compact, silent - has room for a 2.5" hard-disk,

Hi, I'm looking for IBM hardware to support: 100 SIP hard phone users 10 fax machines on SIP ata's maybe later an additional 100 sip soft phones. Initially, all calls will be through PRI. Some conferencing. Don't know yet if this will even get used. Using 1.4 + ( probably business edition ) I'm looking for anyone who some experience / gotchas. I've google'd and

I have 2 HP Proliant 365 G5 servers with PCI-E risers. I bought a Digium TE121B single port card. When installing the card, the slot on the card doesn't quite line up with the tab in the PCI-E slot. If I loosen the front plate on the card, Ican sort of make it plug in, however, the card won't go in far enough to screw down the plate. I tried t...

So, in the ongoing saga of the unusual 1U short-depth workstation, we have narrowed the field to two choices. Both entrants are configured with 16GB memory (4x4GB), two 2.5" drives (1x250GB SSD and 1x1TB HDD), and an NVIDIA NVS510 graphic card (quad display): 1) SuperMicro 5017R-MF, Xeon E5-2609 processor 2) SuperMicro 5017C-LF, Xeon E3-1220 processor (I wish SuperMicro had a list of their

hi there. anyone have any tips on params to pass to the kernel etc in order to install Centos4 or Centos5 32bit or 64 bit installed on this unit i can get it close to install, yet no cigar. it is a tyan MB and ill try to get more info if needed... for this case, please assume for now that the hardware itself is not "bad" thanks in advance... - rh Rackable Systems Dual Opteron 2.0

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

Take what I say with a grain of salt: I'm an amateur and haven't actually touched Speex in any way, yet. I'm just sort of passing on personal belief from personal experience. Also, check and make sure that the microphone line is insulated. There are a number of problems with sound cards picking up interference from the host machine. The wires that run between ICs on a card

Thanks for the speedy response and detailed, enlightening explanation. Now I understand where the problem is, and will try out your suggestions just to further confirm my conjecture. When I am done, I have to take the foil out, though. This is a product for our customers to use, and although we've got budget for mulffing every sound card we developers use, most likely the company

How well do you think asterisk could run on a miniITX board like the ones linked below with the call volume of say a small doctors office or something? http://www.mini-box.com/s.nl/sc.8/category.15/.f - Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/638e4426/attachment.htm