I have 2 HP Proliant 365 G5 servers with PCI-E risers. I bought a Digium TE121B single port card. When installing the card, the slot on the card doesn't quite line up with the tab in the PCI-E slot. If I loosen the front plate on the card, Ican sort of make it plug in, however, the card won't go in far enough to screw down the plate. I tried the card in the other server and had the same problem. Has anyone else experienced this? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081107/a24814ba/attachment.htm
>I have 2 HP Proliant 365 G5 servers with PCI-E risers. I bought a Digium TE121B >single port card. When installing the card, the slot on the card doesn't quite >line up with the tab in the PCI-E slot. If I loosen the front plate on the card, >Ican sort of make it plug in, however, the card won't go in far enough to screw >down the plate. I tried the card in the other server and had the same problem. >Has anyone else experienced this?Probably obvious, but did the assembler place the bracket on the wrong side of the pcb forcing the offset? jlc
I bought 2 cards and they are both assembled the same way. Both have the same problem.
I returned both cards and got a Sangoma. We'll see........... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081110/c6e76dc0/attachment.htm