Hi all, we're trying to install CentOS 5.1 on a Sun Ultra 40. This is an AMD-powered machine and we're using the x86_64 version of CentOS 5.1. The machine is using the NVidia CK804 chipset and has SATA disks. It also has 16GB's of memory which prompted us to upgrade the BIOS on the machine from 1.1 to 1.6 per this (we also have the two quadro cards): http://docs.sun.com/source/819-3954-18/index.html#0_37092 The install goes fine up until the installer is trying to format the disks. Part of the way through it simply dies and pops up an error saying that the installer couldn't format the LVM volume and we have to reboot. An examination of dmesg output shows that there are many SATA errors occuring at this point. Timeouts and such. After a reboot, the SATA drive no longer shows up -- not even in BIOS. It's as if the formatting has instructed the drive to deactivate itself. :) A hard reset and reseat of the drive in the SATA enclosure brings it back again. First thought was that the slot or SATA port was bad, so we have moved to others with the same result. Solaris 10 x86 installs perfectly on this machine, so I'm starting to think that the sata_nv driver is to blame here. We're in the process of trying 32-bit CentOS 5.1 on the system just for giggles, and may try Fedora 8 as well or RHEL 5.1 and use our paid support to track this issue down, but thought I'd run it by everyone here. Didn't see any existing issues in bugzilla.redhat.com or bugs.centos.org. Any insights on this? I will get the exact error messages posted up here soon (output from dmesg, etc). TIA, Ray
Ray Van Dolson wrote:> Hi all, we're trying to install CentOS 5.1 on a Sun Ultra 40. This is > an AMD-powered machine and we're using the x86_64 version of CentOS > 5.1. The machine is using the NVidia CK804 chipset and has SATA disks. > It also has 16GB's of memory which prompted us to upgrade the BIOS on > the machine from 1.1 to 1.6 per this (we also have the two quadro > cards): > > http://docs.sun.com/source/819-3954-18/index.html#0_37092 > > The install goes fine up until the installer is trying to format the > disks. Part of the way through it simply dies and pops up an error > saying that the installer couldn't format the LVM volume and we have to > reboot. > > An examination of dmesg output shows that there are many SATA errors > occuring at this point. Timeouts and such. > > After a reboot, the SATA drive no longer shows up -- not even in BIOS. > It's as if the formatting has instructed the drive to deactivate > itself. :) A hard reset and reseat of the drive in the SATA enclosure > brings it back again. > > First thought was that the slot or SATA port was bad, so we have moved > to others with the same result. > > Solaris 10 x86 installs perfectly on this machine, so I'm starting to > think that the sata_nv driver is to blame here. > > We're in the process of trying 32-bit CentOS 5.1 on the system just for > giggles, and may try Fedora 8 as well or RHEL 5.1 and use our paid > support to track this issue down, but thought I'd run it by everyone > here. > > Didn't see any existing issues in bugzilla.redhat.com or > bugs.centos.org. > > Any insights on this? > > I will get the exact error messages posted up here soon (output from > dmesg, etc). > > TIA, > Ray > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centosTry booting while disabling ACPI and APIC. linux noapic noacpi at the boot menu. -- James A. Peltier Technical Director, RHCE SCIRF | GrUVi @ Simon Fraser University - Burnaby Campus Phone : 778-782-3610 Fax : 778-782-3045 Mobile : 778-840-6434 E-Mail : jpeltier at cs.sfu.ca Website : http://gruvi.cs.sfu.ca | http://scirf.cs.sfu.ca MSN : subatomic_spam at hotmail.com
Ray Van Dolson wrote:> > Hi all, we're trying to install CentOS 5.1 on a Sun Ultra 40. This is > an AMD-powered machine and we're using the x86_64 version of CentOS > 5.1. The machine is using the NVidia CK804 chipset and has > SATA disks. > It also has 16GB's of memory which prompted us to upgrade the BIOS on > the machine from 1.1 to 1.6 per this (we also have the two quadro > cards): > > http://docs.sun.com/source/819-3954-18/index.html#0_37092 > > The install goes fine up until the installer is trying to format the > disks. Part of the way through it simply dies and pops up an error > saying that the installer couldn't format the LVM volume and > we have to > reboot. > > An examination of dmesg output shows that there are many SATA errors > occuring at this point. Timeouts and such. > > After a reboot, the SATA drive no longer shows up -- not even in BIOS. > It's as if the formatting has instructed the drive to deactivate > itself. :) A hard reset and reseat of the drive in the SATA enclosure > brings it back again. > > First thought was that the slot or SATA port was bad, so we have moved > to others with the same result. > > Solaris 10 x86 installs perfectly on this machine, so I'm starting to > think that the sata_nv driver is to blame here. > > We're in the process of trying 32-bit CentOS 5.1 on the > system just for > giggles, and may try Fedora 8 as well or RHEL 5.1 and use our paid > support to track this issue down, but thought I'd run it by everyone > here. > > Didn't see any existing issues in bugzilla.redhat.com or > bugs.centos.org. > > Any insights on this? > > I will get the exact error messages posted up here soon (output from > dmesg, etc).Try "acpi=noirq" as a kernel argument. Some AMD chipsets have problems letting the OS know what irq the 8250 timer is on, the nvidia one is definitely a problem, I have the same chipset in a couple of Dell Dimension e521 desktops :-( -Ross ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.