search for: reseat

...lasts the entire call. In some cases, the noise doesn't start until a minute or 2 into the call, while others last the entire call. In some of the more serious cases, calls are dropped after the noise has occurred as well. Another symptom has been really bad static on a specific channel. After reseating the card to try to fix both this as well as the problem above, the problem usually goes away, but it seems to come back quicker each time. Also, the channel that the static occurs on changes after each reseating (after some time). Could this just be a bad digium card? Or could it be a bad PCI b...

...1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0, device 4, function 0 and advises that the PCI expansion card be removed and reseated. Any suggestions on what exactly might be causing this are welcome. Thanks. Joseph -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071023/22dbcaff/attachment.htm

...connected a network cable, wondering if it's in wake-on-lan; I've tried connecting to it via its management port, and *zip*. I'm not going to do, as several folks' posts that I googled (been at that for hours), cut the cable and solder in an on/off switch. I have taken the lid uff, reseated the PSUs, and the cable connecting to the front panel, and nada. Anyone got any ideas? mark

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not new: I can remember seeing DEC engineers cleaning up the contacts on memory boards for a VAX 11/782 with a pencil eraser c.1985. It's still a pretty standard first fix to reseat a card or connector. On 18/01/16 15:47, Matt Garman wrote: > That's strange, I expected the SMART test to show some issues. > Personally, I'm still not confident in that drive. Can you check > cabling? Another possibility is that there is a cable that has > vibrated into a...

...s which have filled the UltraStar with data in a couple of single-partition pools on it had shown that the writes and scrubs yielded 0 errors. However, now that this disk works as part of a larger old pool (9*5-vdev raidz1 sets), it suffers CKSUM error counts found on every scrub. They tried to reseat the disk in the same position (and will soon try the ex-position of another failed disk), but reseating did not help. For some reason, while early high CKSUM counts led to ZFS degrading the pool, this no longer happens (and my questionable script to clear the errors during scrub is not in use anymo...

...have to reboot. An examination of dmesg output shows that there are many SATA errors occuring at this point. Timeouts and such. After a reboot, the SATA drive no longer shows up -- not even in BIOS. It's as if the formatting has instructed the drive to deactivate itself. :) A hard reset and reseat of the drive in the SATA enclosure brings it back again. First thought was that the slot or SATA port was bad, so we have moved to others with the same result. Solaris 10 x86 installs perfectly on this machine, so I'm starting to think that the sata_nv driver is to blame here. We're in t...

...ecause when we plugged in the cable the light on the card did not light up.?? when we connect the pair server to another separate server it did.? Once the server is back up I will try these things that you suggest, and compare them to the pair server we are trying to connect to.? We are hoping that reseating the card will work.? Probably wishful thinking. Thx.KM From: Gordon Messmer <gordon.messmer at gmail.com> To: CentOS mailing list <centos at centos.org> Sent: Monday, February 13, 2017 12:08 PM Subject: Re: [CentOS] A question on networking (CentOS 6) On 02/13/2017 06:...

...n a DIMM! On 19/01/16 00:39, Peter wrote: > On 19/01/16 12:34, J Martin Rushton wrote: >> Not new: I can remember seeing DEC engineers cleaning up the >> contacts on memory boards for a VAX 11/782 with a pencil eraser >> c.1985. It's still a pretty standard first fix to reseat a card >> or connector. > > I used to do that as well. The contacts would come out nice and > shiny when you clean them. Then I found out that what I was > actually doing was removing the very thin layer of gold plating on > the contacts and revealing the copper underneath....

...er of times, but never for more than getting info, or setting the server name on a Dell LCD screen. However, I had a server screaming about intruder alert, intruder alert, er, "Chassis intrusion detected", and I thought there might be a way to shut it up (this after pulling the server and reseating the lid). A quick google found, on the first page, an 8 page document by Dell called "Managing Dell PowerEdge Servers Using IPMItool". It's clear, comprehensible, has links to the ipmitool project, and to the IPMI standard, which has documentation on calls and parameters. It also h...

...ansaction Processing Hints ??????? Capabilities: [1b0] Access Control Services ??????? Capabilities: [1c0] Latency Tolerance Reporting ??????? Capabilities: [1d0] #19 ??????? Kernel driver in use: ixgbe ??????? Kernel modules: ixgbe I will check again after reboot and as Mark recommend I will reseat the card. I will check BIOS too. As this is production machine I cannot do that now. I am going to buy another cheaper 1 Gb Intel card for testing purposes. I will report my results later. Miroslav

I keep getting a red alarm when trying to setup asterisk to use my TE420B EC. I only have a blank context setup in my extensions.conf as I haven't started to config that until I can clear this red alarm. I don't have physical access to the server, so I can't go reseat the modules/card/ethernet cable, though I have hands on location that have done this a couple times already. Please help. I'm quite frustrated at this point. Thank you in advance for any help. /etc/dahdi/system.conf # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) span...

Hi folks, I inherited a very old computer (I guess about 8 years old) which I'd like to use for some training on CentOS. I downloaded images for CentOS 6.4 i386 (DVD 1 and 2) and burned them onto discs. After inserting DVD 1 into drive and booting, on the "Welcome to CentOS 6.4!" screen I select "Install or upgrade an existing system". I then skip the media test and

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 19/01/16 12:34, J Martin Rushton wrote: > Not new: I can remember seeing DEC engineers cleaning up the > contacts on memory boards for a VAX 11/782 with a pencil eraser > c.1985. It's still a pretty standard first fix to reseat a card or > connector. I used to do that as well. The contacts would come out nice and shiny when you clean them. Then I found out that what I was actually doing was removing the very thin layer of gold plating on the contacts and revealing the copper underneath. That's why you should ne...

...t; wondering if it's in wake-on-lan; I've tried connecting to it via its > management port, and *zip*. > > I'm not going to do, as several folks' posts that I googled (been at that > for hours), cut the cable and solder in an on/off switch. I have taken the > lid uff, reseated the PSUs, and the cable connecting to the front panel, > and nada. > > Anyone got any ideas? > > mark > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos

Hi Everyone, I found these in my log files. I am running the latest version of gs, as distributed by CentOS Oct 11 18:03:27 charlie kernel: gs[9960]: segfault at 0000000000000000 rip 0000003f0cd2063e rsp 0000007fbfffe090 error 6 Oct 12 14:40:58 charlie sshd(pam_unix)[12919]: session opened for user root by root(uid=0) Oct 13 15:16:11 charlie kernel: gs[16302]: segfault at 0000000000000000 rip

I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error: ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed The output of dmesg said that wcfxo:Out of space to write register 06 with e0. What?s

...computer to another, copied all the config files, and now the LED on the line 11 - third line of the third card doesn't go on (it used to on the previous computer). I can get by telling * not to use this line for now but does anyone have any suggestions for getting it to work? Unseat and reseat the daughterboard? Call Digium for support? /etc/zaptel.conf contains: fxoks=1-11 fxsks=12-16 loadzone = us defaultzone=us -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support.

...Sent: Tuesday, April 11, 2006 3:58 PM To: Tim Reimers Subject: Fatpipe Support - Authorization to open Box - fwrps2001101288 *** WYATT *** 4/5/2006 2:30:37 PM I gave permission to Tim Reimer at Asheville City School District to open up the box of the Fatpipe with serial number fwrps2001101288 and reseat the WAN cards due to a possible bad NIC. I checked about the syslog and as of now, the Fatpipe does not support that - I know it is being talked about in development. Wyatt Fowler Support Engineer Fatpipe Networks 4455 South 700 East, Suite 100 Salt Lake City, Utah 84107 Ph:(800)724-8521 xtn...

Greetings list, Wondering if some kind soul can help me with an issue with chan_sip segfaulting as soon as it loads... Basically, if sip.conf contains any peers with "host=dynamic" in them, asterisk won't start. Doing -vvvdddc yields the following: [chan_sip.so] => (Session Initiation Protocol (SIP)) == Parsing '/etc/asterisk/sip.conf': Found Segmentation fault As

I have a problem with a Sangoma card. It worked until yesterday. Now I keep getting this error: Jul 29 17:45:17 pbxacura kernel: wanpipe1: Enable E1 CAS signalling mode! Jul 29 17:45:17 pbxacura kernel: wanpipe1:w1g1: Rx Error: No 'DeviceSelect' from target: pci fatal error! (0x000FA000) Jul 29 17:45:48 pbxacura last message repeated 30946 times It is using Wanpipe 3.5.6 and Zaptel