search for: recharges

Dear Arnaud, Now I started to write a driver that simulates continous power breaks. (E.g. in every 30 minutes.) This could be used for testing of setup of client upsmons. I have to simulate a behaviour of a real UPS. The physical model contains an extra attribute: the charging current that needed to compute recharge time and actual battery charge during the recharge process. Can we call this

Dear Arnaud, Now I started to write a driver that simulates continous power breaks. (E.g. in every 30 minutes.) This could be used for testing of setup of client upsmons. I have to simulate a behaviour of a real UPS. The physical model contains an extra attribute: the charging current that needed to compute recharge time and actual battery charge during the recharge process. Can we call this

Hello all, I'm using Nut quite happily with my Powerware 9125 and 9115 UPSs. I'd like to delay restoring power to the computers after a loss of power shutdown until a reasonable battery charge has been restored, to prevent repeated shut downs in a brown out or storm situation. I know I read somewhere how to do this months ago, but now that I need to implement it, I can't seem

Hi, I've noticed that http://llvm.org/status/ hasn't been updated for a while, so I tought that some of you might find the following information interesting and/or encouraging... For benchmarking the stuff I'm working on I needed to compile a number of open-source packages. The settings I used: AS=llvm-as lLD=llvm-ld AR=llvm-ar CXX=llvm-g++ CC=llvm-gcc CFLAGS="-g

On Oct 17, 2017, at 8:48 AM, LLSJ Kr?ger <llsjk at lakruger.za.org> wrote: > Results of 'lsusb -vvv -d 3344:' [...] > wDescriptorLength 136 > Report Descriptors: > ** UNAVAILABLE ** > Can you please re-run lsusb, possibly as root, to grab the contents of the "Report Descriptors" section? (Running "usbhid-ups"

The page to see this if you cannot see HTML on e-mail or just want to look at all of it is. Sometimes, if it is reasonable, people would prefer not to search around to web sites so I am posting highlights in HTML as well as giving the link. Could someone buy me a DMC-800 :-). Why I always look for components and off brands that focus on engineering rather than marketing is that they are not in the

Hi, I have an UPS with only the marking D1000 on it and it came with Junda-Tech's UpsMate. Its USB id is 3344:0025, which is apparently a microprocessor. I've could get some of the HID interactions as described on the website, but there are some outstanding. Junda-Tech does not respond to any queries. Does anybody else have the same or a similar UPS with more information? What is the

I'm looking for a prepaid calling card platform that: * easily scales to multiple servers with a common database for: redundancy, capacity, and performance Looking to start with capacity to handle 100 simultaneous calls and be able to easily scale to 1000+ simultaneous calls. * in addition to the normal anti-fraud measures, supports an API for easily adding new anti-fraud tests along the

Hell R-list, At the cost of sounding far-fetched and almost incredulous, I would like to know if any R user is remotely considering the use of R on Mobile devices, and Android in particular. I really do not have an idea of the kind of definite incentives in terms of using R on Android, but having an analytical engine on a mobile phone would allow for micro statistics to be collected from the log

jduran wrote: > Your wisdom please! Sennheiser is a reputable brand. The model you cited is in their lowest cost series. I have sold a number of these systems over the years. Their first generation (not G2) were problematic in not being very durable. I don't have as much experience with the G2, but the few we have sold have worked fine for several years. My first choice for most

greetings. centos 6.8 kde 4.3.4 toshiba satellite l4550-s5976 laptop - part 1: clock losing time first noticed time was off by 8 min, reset via F2 cl terminal. ~40 min later, off by ~2 min, reset via 'service manager' by stopping ntpd, count 20, started ntpd, within a few seconds, clock reset to correct time. ~1 hour later, noticed clock off again, considered cause to be cmos

Hi Peter, I got all your patches and applied them, and I wanted to say kudos for a great job done. This is the output of upsc that I'm getting right now. I had the same issue when using any cvs version (from two weeks ago) that made my UPS go into a state where it wasn't functioning normally (checking the kernel log shows that it cannot be connected and I had around a page of DEVFS_USB

Hi, I'm the original poster on the subject. Thanks for all the replies. A few more points. The generator outputs 7kw @ 220V. The total PC's supplied is about 9. I estimate power consumption to be 9 x 300w=2700w 4 halogens @ 400w each=1600w 10 Compact Flourescents @ 11w =110w Therefore total power=4410w Which leaves me with spare capacity of about 2590w (in theory). I think its

Charles, the unit has two redundant power supplies, with only one hooked up to the UPS. So I should be able to do a deep test with the machine itself, right? I have tried it, but it aborts at some point... For the quick test, it discharges the battery a bit, then recharges, but once it is back to 100%, upsc still gives me: ups.test.result: No test initiated Is that expected? Best, Christian Am 17.12.2013 03:55, schrieb Charles Lepple: > On Dec 8, 2013, at 10:41 PM, Christian wrote: > >> test.battery.start.deep - Start a deep battery test >> t...

El 23/5/2015 3:27 p. m., "Nico Kadel-Garcia" <nkadel at gmail.com> escribi?: > > On Wed, May 20, 2015 at 6:10 AM, Neil <nwilson123 at gmail.com> wrote: > > Hi guys, > > > > I'm running a Sernet-samba-ad-4.1.17-11.el6.x86_64 PDC with another 4 > > Samba4 DC's all joined to the same AD domain myorg.local > > > > My client wants

Hi list, I use a .xml file for a function's demo in the R package I'm creating. Since it doesn't belong to any of the 'standard' folders, i.e. those mentioned in the 'Writing R Extension', I put it in a folder call "myXML", much like the 'iris.xl' file in 'xls' folder from 'gdata' package, for example. After running R CMD build,

Hello, I find in shutdown.txt file that before system boot after a power failure, it's better to check powerdown flag to be sure and pausing in the startup script to let the batteries recharge with filesystem. So i want to know which startup script is concerned? For the system or for nut? Thanks to explanation. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I am uploading images ajax-attachment_fu-rmagick and an iframe and me climb correctly, but when I finish the process and the driver will I redirect_to enc_url I recharge layer ajax. I tried with redirect_to enc_url :partial => ''m_content'' and redirect_to enc_url, :update => ''m_content''. But neither I recharge ... rhtml ------ <% form_for(photo,

On Jun 8, 2019, at 4:16 PM, Roger Price wrote: > > Is your System Shutdown Plan to shut down using upsmon or using the script upsched-cmd? In upssched.conf you do not have a line > > AT LOWBATT ups at ... EXECUTE lowbatt > > and in upssched-cmd there is nothing to shut down the system. Joe, Roger has a good point - the SHUTDOWNCMD should work as long as the master system

Hi guys, I'm running a Sernet-samba-ad-4.1.17-11.el6.x86_64 PDC with another 4 Samba4 DC's all joined to the same AD domain myorg.local My client wants me to disable all USB ports for all the users joined to the domain. Is it possible to do this via a group policy so that users logging onto any of the DC's will not be able to use their USB ports? I currently admin my AD with a