search for: rc8n

Hi list! On a newly installed RHEL 4 box I'm trying to install bristuff-0.2.0-RC8n. Everything did compile but I am running into some problems with the zaphfc driver. First of all when I load zaphfc *before* zaptel (yes I know I shouldn't do that) I get a kernel panic and the box hangs. Not so nice, especially when you are trying to fix stuff from remote locations. But o...

Hi list! I'm trying to get PrivacyManager working but for some reason it always thinks that CallerID is present (when it isn't). I get this on the console: == Primary D-Channel on span 1 up -- Accepting voice call from '' to '0711234567' on channel 0/2, span 1 -- Executing Ringing("Zap/2-1", "") in new stack -- Executing

...x86_64 on an Athlon64. The box was installed only yesterday. Yesterday I was still able to compil stuff, yesterday even the tiniest and simplest programs fail to compile always with internal compiler error: Segmentation fault. For example: make -C /usr/src/linux-2.6 SUBDIRS=/tmp/bristuff-0.2.0-RC8n/qozap ZAP=-I/tmp/bristuff-0.2.0-RC8n/zaptel-1.0.9 modules make[1]: Entering directory `/usr/src/kernels/2.6.9-11.EL-x86_64' CC [M] /tmp/bristuff-0.2.0-RC8n/qozap/qozap.o In file included from include/linux/types.h:13, from include/linux/kernel.h:13, from...

...39;t have problem when load module, but whrn I give "ztcfg -vv", I see 6 the six channels that I configured, then my computer hang and I have to reboot it. (I'm using a VIA Epia-M 1000 with Via C3 processor) root@test:~# modprobe zaptel root@test:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o root@test:~# ztcfg -vv Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual...

...related. 3.Signal distortion is limited to the use of the CVS version of the Bristuff patch for asterisk (tested on Bristuff-0.2.0-RC8f-CVS/Asterisk-CVS-05.29.05). The Stable versions of the Bristuff patch do not have the problem (tested on Bristuff-0.2.0-RC8f/Asterisk-1.0.7 and Bristuff-0.2.0-RC8n/Asterisk-1.0.9). 4.Signal distortion is limited to calls with an ISDN Transfer Capability of 0x00 (SPEECH) or 0x10 (3K1AUDIO). Calls with an ISDN Transfer Capability of 0x08 (DIGITAL) are not being effected. 5.The amount of signal distortion is of such severity that it is almost impossible to...

Hi, For a significant time now (since about 0.2.0-rc8n) the qozap driver has become very verbose if an ISDN line is not connected... I get the messages below every couple of seconds in the asterisk logs. The "flaw" in the messages is the "Alarm cleared" message - The alarm cannot possibly be cleared because there is no physical med...

Hi Guys I have been running a test server for a few days now with * 1.0.9 bristuff RC8n. I had a power failure and the test machine was not on the ups. When power was restored I found the following error: FATAL: Error inserting zaphfc (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in module, or unknown parameter (see dmesg) My dmesg output: zaphfc: uns...

hi all! I'm running an Asterisk-box with bristuff-....RC8n and 2 HFC-S cards. I m located in Vienna/Austria. I have the problem that on outgoing calls i hear my voice as a short echo (about half a second). This occurs not on every call. I tried some changes in my zapata.conf, with rxgain and txgain settings, but to me its hard to find a configuration whi...

...channel 0/2, span 1 -- Starting simple switch on 'Zap/2-1' ^^^^^^^^ here I get a dialtone from PBX and I can dial start dialing for 8 seconds for different reasons I tried to update on latest bristuff-0.2.0-RC8n. after update the zaphfc overlap dial don't work anymore. when I dial the S0 bus it jumps directly into 's' extension, which does not exisist in the context and I get 'no number' from PBX. zapata.conf: ------------ [channels] switchtype = euroisdn signalling = bri_cpe pridialpl...

...a whole minute, and then returns to state F7 (ACTIVATED). I have used Asterisk 1.2.0-Bristuffed-0.3.0-PRE-1 with the corresponding florz patch and Asterisk 1.2.1-Bristuffed-0.3.0-PRE-1g with the corresponding florz patch, but they both have the same problem. I use Asterisk 1.0.9-BRIstuffed-0.2.0-RC8n as a live machine on the same NT1 with no problems at all. The D-channel goes down and up (like all KPN ISDN lines do), but I have never had any problems with the machine not being reachable or something. When I have the "problematic" Asterisk 1.2.x testmachine on the same NT1 using anot...

...?, the 'span' number is random Setup: * between Local Telco (2 BRI) and Samsumg PBX (2 BRI). I have also a TDM400P for some Analog lines and have some Sip phones too. Samsung ISDN PBX (2 lines) -> * with Junghanns QuadBRI -> Telco 2 lines. Linux 2.6.8 Asterisk 1.0.9-BRIstuffed-0.2.0-RC8n pbx*CLI> pri intense debug span 2 Enabled EXTENSIVE debugging on span 2 then I take a PBX phone and dial a extenting number in the Telco's range. Sep 12 10:59:34 WARNING[3461]: chan_zap.c:8050 pri_dchannel: Ring requested on unconfigured channel 255/255 span 2 pbx*CLI> Some status a...

...ilure the kernel was updated and after the powerfailure the box booted the new kernel for which you need to recompile the module. Cheers! Remco On Thu, 18 Aug 2005, Terry Wade wrote: > Hi Guys > > > > I have been running a test server for a few days now with * 1.0.9 > bristuff RC8n. I had a power failure and the test machine was not on > the ups. When power was restored I found the following error: FATAL: > Error inserting zaphfc > (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in > module, or unknown parameter (see dmesg) > > > &gt...

I would like to know how to install asterisk 1.0.9 with zaphfc working on a SuSE 9.2. I tried this: - The rpms with SuSE 9.2 are asterisk 1.0.6 - bristuff works, except for zaphfc, which doesn't compile. - The official asterisk download file doesn't contain isdn bri support Any ideas? Lars Dybdahl.

I'm using Asterisk 1.09 with bristuff 0.2.0-RC8n, one BRI line and a Sipura SPA-2000. I have a HP LaserJet 3330mfp all-in-one. I can receive faxes but not send them. The faxes start whistling to each other but the transmission is stopped with a "communication error" To receive a fax I have this in my dialplan: exten => 0000000000...

hi all, I have this anoying problem with Direct in Dial, when someone calls from an extern analog phone to my isdn number, Asterisk is not waiting for the DID numbers the caller dials after the main-number. Version: Asterisk 1.0.9-BRIstuffed-0.2.0-RC8n, with junghanns quadbri zapata.conf: switchtype = euroisdn signalling = bri_cpe faxdetect=incoming pridialplan = unknown prilocaldialplan = unknown echocancel=yes echotraining = 100 callerid=asreceived usecallerid=yes overlapdial=yes immediate=no ;-------------------------------------------------...

...Ran the download.sh and compile.sh scripts to automate the process. gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DZAPTEL_OPTIMIZATIONS -DASTERISK_VERSION=\"1.0.9-BRIstuffed-0.2.0-RC8n\" -DINSTALL_PREFIX=\"\" -DASTETCDIR=\"/etc/asterisk\" -DASTLIBDIR=\"/usr/lib/asterisk\" -DASTVARLIBDIR=\"/var/lib/asterisk\" -DASTVARRUNDIR=\"/var/run\" -DASTSPOOLDIR=\"/var/spool/asterisk\" -DASTLOGDIR=\"/var/log/asterisk\&qu...

...some feedback based on other people's experience. We currently use the Junghanns card, which is a pure Zaptel solution, which is fantastic, but they have no hardware EC solution, and their drivers are becoming increasingly un-stable with time (I back-port to a modified qozap driver from 0.2.0-RC8n which is the last one I can run without bad behaviour) I am aware of the Beronet BN4S0, which appears to be "exactly" the same card as the Junghanns card, but with mISDN drivers, still no h/w EC solution, and as a result, less effective (from what I read here) software echo cancellation....

...tion fault Are there any changes to the config neccessary? Are there known issues with this Asterisk version? Can I temporarily disable the TE411 specific stuff to get asterisk running again? Platform: HP DL380G3 with 2x2.4Ghz, 1GB RAM, 1xTE411P,1xOctoBRI Version: Asterisk 1.0.9-BRIstuffed-0.2.0-RC8n zaptel.conf: span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 zapata.conf: [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local priindication=outofband internationalprefix=00 nationalprefix=0 usecallingpres=yes hidecallerid=n...

After upgrading a CentOS 3.x box to CentOS 4.1 (both x86_64 with an Athlon64) I also wanted to get the latest bristuff. Unfortunately bristuff without florz causes the box to kernel panic within hours (console will complain about bad frame received something). It seems however that the florz patch will not work for x86_64 arch. Bristuff -0.2.0-RC8j compiles fine without the florz patch, but

Hi, my zaphfc is flooding my syslog with two messages (even without asterisk running). Is this "normal"?: -------------------------------------------------- zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353, wanted 8 got 7), probably a buffer overrun. zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9). With Asterisk running (asterisk -vvvvvgc)