Displaying 12 results from an estimated 12 matches for "rc2b".
Did you mean:
rc2
2005 Jan 28
1
1.0.2-BRIstuffed-0.2.0-RC2b and '*8' calls dropping
I'm using Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b - when anyone picks up a
call with '*8' - the call will drop after about 20 or so seconds. Is
this a general problem with Asterisk 1.0.2?
As this is the latest release that it appears Klaus-Peter Junghanns has
for public consumption - is there anything I can patch for just this
problem - o...
2004 Dec 27
1
Make error installing bristuff-0.2.0-rc2b
Hi list!
I'm trying to install bristuff on a newly installed box. The box is
running a rebuild of RedHat Enterprise linux with the latest kernel. The
architecture of the box is x86_64 (Athlon 64), the os is 64 bit with 32
bit compat libs installed. Also the kernel source is installed as well as
the (kernel) development tools.
The bristuff install.sh script downloads asterisk+zaptel 1.0.2
2005 Sep 23
1
zaphfc problem: overlapdial don't work after update bristuff
...TELCO |
| BRI |
---------
|
| PBX external S0
--------
| PBX |
--------
| PBX internal P2P S0 NT Mode
|
| HFC-S Card P2P TE Mode
---------
| * |
| BOX |
---------
Since nearly one year it runs Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
fine. after dialing the internal S0 number (61) I get overlapdial and
dialtone.
[example dial the PBX S0 with Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b]
-- Accepting AUTHENTICATED call from 192.168.255.1, requested format = 8, actual format = 8
-- Executing Dial("IAX2/ogo@call_saar/1&quo...
2005 Jan 03
2
agent with queues remain unavailable during transferred call
...is:
103 (TIC 3) logged in on MGCP/aaln/1@00059002798e-1 talking to
Zap/20-1 (musiconhold is 'default')
As you can see, the Agent is shown with the transferred call, and is
unavailable for new calls. However, the phone _is_ on hook and free.
I am using a 1.0.2. version (bri-stuff rc2b)
Any suggestions are welcome.
Florian
2004 Dec 21
4
hint extension and Snom phones - CVS or stable?
...et an error in the dialplan, but it does not work either.
On SIP/26 I want to monitor SIP/22. This is what I do right now:
extension.conf
[incoming]
exten => 955,hint,SIP/22
exten => 955,1,Dial(SIP/22)
sip.conf
[26]
...
subscribecontext=incoming
...
Running Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
TIA and rgds
pos
2005 Jan 23
4
Florz patch for zaphfc
Has anyone had any success using the Florz patch for zaphfc ?
I have a * system with 2 HFC cards which is working fine with 2 PTP ISDN
lines however the users are complaining of crackles on the line which I am
assuming is related to the IRQ issues raised by Florz.
I have tried to use the patch but it errors trying to patch zaphfc.h
Any help would be appreciated.
Regards,
Stuart
--
No virus
2005 Jan 12
3
Bristuff 0.20RC3 loses connectivity after short line interruption?
I installed bristuff0.20-RC3 (which includes * 1.0.3 stable)
It works fine until I disconnect the phone jack for the ISDN line. Even
after plug it back in asterisk still reports that it could not create a
zap channel when I try to dial out and the line gives an engaged tone when
I try to dial.
Re-starting asterisk doesn't solve this, I have to stop asterisk, unload
the modules, reload
2004 Nov 30
0
AW: zaphfc problem
...t;>zaphfc: card 0 RX 2 bytes [ 0x60 0xe4 !]
>>------
>>But two seconds later I can read on my phone's display :
>>"Line Failure".
>>
>>What could cause that ?
>>
>>I installed the latest bristuff ( Asterisk
>>1.0.2-BRIstuffed-0.2.0-RC2b ).
>>
>>
>>-------
>>/etc/zaptel.conf
>>-------
>>loadzone=nl
>>defaultzone=nl
>>
>>span=1,1,3,ccs,ami
>>bchan=1-2
>>dchan=3
>>--------
>>
>>I loaded the module with:
>>insmod ./zaphfc.ko modes=1
>>
>...
2004 Dec 03
0
ZAPHFC, Asterisk does not load with signalling = bri_net_ptmp
...ot;text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi,<br>
<br>
I am trying to get zaphfc running in nt mode with asterisk. I am using
bri-stuff 0.2.0 rc2b (but tried others) and everything compiles well
against my mandrake 2.4.25-9mdk kernel (tried 2.6.3 also but that was a
disaster). I followed the exact instructions on wiki and both zaptel
and zaphfc load ok When I load zaphfc syslog says:<br>
<br>
<b>Dec 3 20:26:12 aste...
2004 Nov 20
2
zaphfc sound problems
hi list.
after my unsuccessfull experiences with mISDN i tried again to implement
a zaphfc based solution.
problem is: sound on calls via capi is stuttering/broken and therefore
unuseable.
my conf:
- cel 1300, 256mb ram
- avm b1 via capi connected to my outgoing ISDN
- acer surf pci via zaphafc and crosslink cable with termination as
internal bus
- siemens gigaset 3035 as internal phone
-
2004 Mar 18
4
zaphfc problem
Hi,
I have a partial working installation with zaphfc.
Incoming call :
For incoming call, seems work fine. But the sound is very bad with bounce
short crashing sound. Same sound with echo cancel off or on.
SDA work fine.
Another problem, it's seems that's zaphfc don't reset correctly the line. I
have one of my D channel how was busy even after stop communication.
Outgoing call :
2004 Dec 23
1
Qestion about TDM over enthernet
...SIP/26 I want to monitor SIP/22. This is what I do right now:
>
> extension.conf
> [incoming]
> exten => 955,hint,SIP/22
> exten => 955,1,Dial(SIP/22)
>
> sip.conf
> [26]
> ...
> subscribecontext=incoming
> ...
>
> Running Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
>
> TIA and rgds
> pos
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http:/...