search for: pry

Hi, Running 1.4.26.1 here. I have installed TE420B card in my server, and followed the appropriate steps (as far as I know to configure it). This TE420B is connected to a CLEC (T1s), so I am using pri_cpe as singalling type. When I dial out, I get this message: Dec 4 11:37:31] WARNING[27983]: app_dial.c:1275 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0

Running asterisk 1.4.26.2 help pri pri debug span Enables PRI debugging on a span pri intense debug span Enables REALLY INTENSE PRI debugging pri no debug span Disables PRI debugging on a span pri set debug file Sends PRI debug output to the specified file pri show debug Displays current PRI debug settings pri show spans Displays PRI

Hello, I am trying to diagnose an intermittent error when a call comes in over our PRI lines. The problem appears random, however I have feeling it has something to do with the call volume, as the frequency increases with more calls on the system. I am not an expert when it comes to reading the PRI Span Debug statements but here is a call that had a problem and I bolded, italicized, and

Hi I have done everything richard told to do ECT . below is my trace, anyone can help ? -- DAHDI/i1/09123278669-4 answered DAHDI/i1/88050048-3 -- Native bridging DAHDI/i1/88050048-3 and DAHDI/i1/09123278669-4 PRI Span: 1 Adding facility ie contents to send in FACILITY message: PRI Span: 1 ASN.1 dump PRI Span: 1 Context Specific/C [1 0x01] <A1> Len:11 <0B> PRI Span: 1

PRI debug of the entire call would be great, also, switchtype would be awesome as well. Thanks! Matthew Fredrickson On Thu, Mar 24, 2016 at 4:07 PM, Carlos Rojas <crt.rojas at gmail.com> wrote: > Hi > > Did you activate the pri debug on the cli asterisk? > > On Thu, Mar 24, 2016 at 12:59 PM, Carlos Chavez <cursor at telecomabmex.com> > wrote: >> >>

Hi All, I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT mode but actually I wasn't able to get it working. I've another standalone PBX, it's a Panasonic model, which works fine connected to the same port. The BT connected to a UK BT BRI line works quite fine after roughly a minute once connected. The PBX can be seen at

Hi, I tried to use Early Media: exten => 1,1,Playback(demo-thanks,noanswer) same => n,Hangup() But when calling my extension I do not hear the voicefile - I only hear the ring tone. In the Asterisk-Log I can see, that the voicefile is played. I got the same result when using "Progress()" in the first priority. I tried "pri set debug on span 1" and got the

Hi all, can somebody help me with pri configuration? Here my zapata.conf: ; Zapata telephony interface ; ; Configuration file [channels] switchtype=euroisdn signalling=pri_cpe ;group=1 channel => 1-15,17-31 ;group=2 channel =>32-46,48-62 ;group=3 channel => 63-77,79-93 ;group=4 channel => 94-108,110-124 And here my zaptel.conf: zaptel.conf [----] 0 L:[ 1+ 0

hello, In a machine I've got : CLI> pri set debug off No such command 'pri set debug off' (type 'core show help pri set' for other possible commands) CLI> core show help pri pri intense debug span <no description available> pri service disable channel Remove a channel from service pri service enable channel Return a channel to service pri set debug

Hi, I have a client that has a 24 channel voice T1 that I have been using e&m signalling over for a number of years. The local telco finally got an ISDN switch and wants to move them to PRI. I didn't see this as a big problem - I've done a few others on this particular Caribbean island without issues, but this would be the first time with a Xorcom unit involved. We tried to do

I am trying to setup Asterisk to act like a PBX connected via a PRI gateway to a voice netowrk where Asterisk is doing outbound overlap dialing for calls that terminate via that PRI. AFter researching through the archives and online dcocs, I thought I had everyting setup right, dialplan configured for '_X!' and the 'overlapdial=yes' in the chan_dahdi.conf file, but when I try and

We fairly recently switched service providers for our 4 PRI circuits. Since that time, we started to notice some failed inbound calls. These calls terminate with an ISDN cause code 47 'resource unavailble'. Most of the time I see this error on the first or second channel on the second span in a trunk group (This is the providers trunk group for hunting, not an Asterisk trunk group). All

Hi everyone! Here is my configuration and messages taken from Asterisk startup. The E1 PRI trunk is connected to our national telecom company here in Croatia. When I call from outside over this trunk to my company I get 'error in connection' respnse. In the same moment I can't see anything in Asterisk, nothing that will tell me that the call reached Asterisk. I think there is a

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

I have seen this posted around the list a few times, but have never found my exact error or even a solution to this. I was getting this error every few seconds...... After moving the card to a different PCI slot and turning off some devices that are not needed. I was able to get the messages down to about every 10 minutes and the T1 card now is sitting in it's own intterupt. Apr 25 23:49:15

Hi, I've just got a TE110P card and installed at Asterisk. I configured zapata.conf, according to www.digium.com/index.php?menu=configuration, but the following error is happening: ... ... ... [chan_phone.so] => (Linux Telephony API Support) == Parsing '/etc/asterisk/phone.conf': Found == Registered channel type 'Phone' (Standard Linux Telephony API Driver)

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

Hello, I seem to be having an issue with the configuration of my PRI on a new asterisk server I've created to replace an old install that I have. The card is Digium Wildcard TE133. I continually get messages like "Primary D-Channel on span 1 down", rather irregularly: [2013-07-29 17:31:39] VERBOSE[3621] sig_pri.c: == Primary D-Channel on span 1 up [2013-07-29 17:31:39]

Hey all, I've got a PRI used for data calls right now, terminated in a MAX 4000. We're only using around 12 channels on average and 16 max, so I'd like to split off the remaining channels to terminate in an Asterisk box. Does anyone know of a device that'll take a PRI in, and spit out two PRI's that share the channels? Also need to be able to do some sort of call routing so