search for: powervaults

Hello all. I'm struggling to get Centos 4 to recognize my Dell Powervaul 132T tape changer. The system doesnt create a device node for it. [root at orion scotty]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun:

My apology for cross posting We have a DELL6850 with 8Gbytes of memory, four 3.2Ghz CPU's , perc 4 raid controller, with fourteen 300Gbyte 10Krpm disk on a powervault 220s, And a powervault 124T LTO-3 tape systems on a separate 160Mbyte/sec adaptec SCSI card. The disks are configured as two 2Tbyte raid 0 partitions using the perc 4 hardware. The problem is - reading from the disk, and

Hi list, I need a little help, I currently have a cluster with vmware and 3 nodes, I have a storage (Dell powervault) connected by FC in redundancy, and I'm thinking of migrating it to proxmox since the maintenance costs are very expensive, but the Doubt is if I can use glusterfs with a san connected by FC? , It is advisable? , I add another data, that in another site I have another cluster

I am having problems when using a Dell PowerVault MD3000 with multipath from a Dell PowerEdge 1950. I have 2 cables connected and mount the partition on the DAS Array. I am using RHEL 4.4 with RHCS and a two node cluster. Only one node is "Active" at a time, it creates a mount to the partition, and if there is an issue RHCS will fence the device and then the other node will mount the

The ZFS crew might be better to answer this question. (CC''d here) --jc William Yang wrote: > I am having issues creating a zpool using entire disks with a fibre > channel array. The array is a Dell PowerVault 660F. > When I run "zpool create bottlecap c6t21800080E512C872d14 > c6t21800080E512C872d15", I get the following error: > invalid vdev

I've googled for this, but everything I find tends to talk about cluster and doesn't give an example close enough that I can figure this out. I have read the Red Hat Cluster Suite Configuring and Managing a Cluster <http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/> links from http://www.redhat.com/docs/manuals/csgfs/. (I think these are mirred on centos.org, but I

Hi List, We had the following error thrown on console on a PowerEdge server running CentOS 5 (64 bit). Googling around didn't yield any particular insights. The server crashed a few minutes after this message. Running memtester, just to check, didn't find anything; and the box has been running for months before this without issue. I'm wondering if anyone has run across this

Hi, When I add a new LUN on an iscsi target and then issue a pool-refresh command on the respective storage pool in libvirt, libvirt will not find the new lun (or notice if luns have been removed). I'm using a Dell PowerVault MD3200i iSCSI Array to hold the volumes for virtual servers in libvirt. In libvirt, I have defined the storage pool as this: <pool type='iscsi'>

Hi, any advice? El mi?., 25 abr. 2018 19:56, Ricky Gutierrez <xserverlinux at gmail.com> escribi?: > Hi list, I need a little help, I currently have a cluster with vmware > and 3 nodes, I have a storage (Dell powervault) connected by FC in > redundancy, and I'm thinking of migrating it to proxmox since the > maintenance costs are very expensive, but the Doubt is if I can

I know this issue has been beat to death on the newsgroups, but I have not yet found an answer. I will make an attempt to include all the necessary info. Description of Problem: I am having problems trying to access large files (>2GB) on mounted smbfs volumes. To clarify, I am attempting to view large files that exist on an NT server, from my Linux box, and getting erroneous results.

I just installed Cygwin / OpenSSH / rsync on two Dell PowerVault 745N NASes running Windows 2003 Appliance Edition. My rsync daemons are running, ssh works, and in theory all is well. But... I'm getting an average of maybe 15 Mb/s rsyncing between them. Now, I know I have an issue in the way they're connected... one is attached to a Cisco 2970 (1 Gb/s), which is attached to a NetGear

I am trying to use: ocfs-support-1.0.10-1 ocfs-2.4.21-EL-smp-1.0.11-1 ocfs-tools-1.0.10-1 with RedHat AS 3.0, 2-node cluster with shared SCSI. 2 dell 1650s, dual CPUs, PERC 3/DC cards chained to a PowerVault 220S. I am using lvm, and here is my layout: [root@cluster1 archive]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 32G 5.1G 25G

System info: Red Hat Enterprise Linux Server release 5 (Tikanga) Kerlen 2.6.18-8.el5 SMP x86_64 Samba version 3.0.23c-2 Eth0 && Eht1 bonded to bond0, 2Gbps. /etc/samba/smb.conf attached below... I?m seeing very slow transfers from Samba.... I?m not sure how else to describe it. If I try and copy a 4GB DVD image from the server to any Windows box (XP, 2003, 2008,

Hello everyone, First of all, great job on the 4.8-R. We have been a long standing user of FreeBSD and are very happy with everything. Now my question. I am trying to stress test a new Dell PowerEdge server and find the limits of its hardware and my tuning. Here are the server stats: * 2x Xeon 2.8 with SMP compiled, hyperthreading NOT compiled in kernel * 4 GB of RAM, 8 GB of swap on Raid 1

Everyone, We just had a pretty bad crash on one of production boxes and the ext2 filesystem on the data partition of our box had some major filesystem corruption. Needless to say, I am now looking into converting the filesystem to ext3 and I have some questions regarding ext3 and Linux software RAID. I have read that previously there were some issues running ext3 on a software raid device

Hi all. Thought you would all be interested to know that i, like many others, am experiencing issues with Samba and Photoshop 7.0. The problem is specific to Photoshop 7.0 when saving files to a Samba share via a W2k/XP OS. Users experience a disk full error when saving from Photoshop but have no issues copying/moving etc files to/from the share outside of PS. Well, after some testing, the

Thanks for your help in adance !!! I work with SAMBA HEAD since alpha24. I have running a BDC, PDC, Printserver on 3 separate pc's. In my domain is integrated a nativ w2k Fileserver ( Dell Nas PowerVault 725 ) for fileserving. Passwords are held in LDAP on every (Linux) machine pam-ldap works. Every thing was fine before the last update to BETA 3. Problem : I was updating from BETA 2 to

Hi, I'm using libvirt 0.8.3 on Fedora 14 (as I wrote earlier, I'm having some trouble updating to the newest version), and I'm having problems getting iscsi and mpath storage pools to work in a usable and consistent manner. I have two storage pools defined on the host machine, one for raw iscsi- devices and one for those same iscsi devices device-mapped by multipath. They look

Hi, Someone already use xen as production server? For example: 3 domains (mail, proxy and web server). And what about stability? Regards, Marlon _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...074, count = 1 Sep 12 07:45:14 nfs0020 kernel: EXT3-fs error (device sd(8,33)): ext3_free_blocks: Freeing blocks not in datazone - block = 806949550, count = 1 Once this has occured, some files have IO errors and a fsck deletes them. The hardware being used are Dell 2650s with 2 PERC 4DC and 4 PowerVaults configured in joint bus mode. The MegaRaid driver being used is 2.00.7 Any help would be greatly appreciated. Thanks Chris L