search for: powervault

Hello all. I'm struggling to get Centos 4 to recognize my Dell Powervaul 132T tape changer. The system doesnt create a device node for it. [root at orion scotty]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: DAT DAT72-052 Rev: A060 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun:

My apology for cross posting We have a DELL6850 with 8Gbytes of memory, four 3.2Ghz CPU's , perc 4 raid controller, with fourteen 300Gbyte 10Krpm disk on a powervault 220s, And a powervault 124T LTO-3 tape systems on a separate 160Mbyte/sec adaptec SCSI card. The disks are configured as two 2Tbyte raid 0 partitions using the perc 4 hardware. The problem is - reading from the disk, and writing to the tape is pathetically slow. The specs say I should get around...

Hi list, I need a little help, I currently have a cluster with vmware and 3 nodes, I have a storage (Dell powervault) connected by FC in redundancy, and I'm thinking of migrating it to proxmox since the maintenance costs are very expensive, but the Doubt is if I can use glusterfs with a san connected by FC? , It is advisable? , I add another data, that in another site I have another cluster with proxmox with...

I am having problems when using a Dell PowerVault MD3000 with multipath from a Dell PowerEdge 1950. I have 2 cables connected and mount the partition on the DAS Array. I am using RHEL 4.4 with RHCS and a two node cluster. Only one node is "Active" at a time, it creates a mount to the partition, and if there is an issue RHCS will fence...

The ZFS crew might be better to answer this question. (CC''d here) --jc William Yang wrote: > I am having issues creating a zpool using entire disks with a fibre > channel array. The array is a Dell PowerVault 660F. > When I run "zpool create bottlecap c6t21800080E512C872d14 > c6t21800080E512C872d15", I get the following error: > invalid vdev specification > use ''-f'' to override the following errors: > /dev/dsk/c6t21800080E512C872d0s0 is part of active ZFS pool...

...et created can be mounted etc (well I might need to modprobe gfs before mounting) Anyways, what's the "correct" way of having this happen on boot? I've been reading the cluster docs, but I haven't found something that makes it click for me. Hooking up the poweredge to the powervault won't work, because eventually we're getting a third server, going to put the power vault into cluster mode and directly connect it to the powervault (thus the decision to use gfs initially, instead of just a "normal" file system and exporting via nfs). Any help would greatly...

...ver crashed a few minutes after this message. Running memtester, just to check, didn't find anything; and the box has been running for months before this without issue. I'm wondering if anyone has run across this before, and if so, if it was software (CentOS) or hardware (PowerEdge / PowerVault) related? Oct 8 12:19:35 someServer kernel: EDAC i5000 MC0: FATAL ERRORS Found!!! 1st FATAL Err Reg= 0x4 Oct 8 12:19:35 someServer kernel: EDAC i5000 MC0: >Tmid Thermal event with intelligent throttling disabled Oct 8 12:19:35 someServer kernel: EDAC MC0: UE row 1, channel-a= 2 channel...

Hi, When I add a new LUN on an iscsi target and then issue a pool-refresh command on the respective storage pool in libvirt, libvirt will not find the new lun (or notice if luns have been removed). I'm using a Dell PowerVault MD3200i iSCSI Array to hold the volumes for virtual servers in libvirt. In libvirt, I have defined the storage pool as this: <pool type='iscsi'> <name>iscsi01</name> <uuid>52eb9c59-a7ac-a4e8-a26e-7ca112f0dd70</uuid> <capacity>85899345920</capa...

Hi, any advice? El mi?., 25 abr. 2018 19:56, Ricky Gutierrez <xserverlinux at gmail.com> escribi?: > Hi list, I need a little help, I currently have a cluster with vmware > and 3 nodes, I have a storage (Dell powervault) connected by FC in > redundancy, and I'm thinking of migrating it to proxmox since the > maintenance costs are very expensive, but the Doubt is if I can use > glusterfs with a san connected by FC? , It is advisable? , I add > another data, that in another site I have another cluste...

...LAGS=-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE" My local file system does appear to support large files. I created a 2.6Gig file and viewed it using ls just fine. The volume is mounted using the following command line: mount -t smbfs -o username=********,password=******** //powervault/output_data /mnt/powervault/output_data Any assistance would be most appreciated. -- Bob McLaren

I just installed Cygwin / OpenSSH / rsync on two Dell PowerVault 745N NASes running Windows 2003 Appliance Edition. My rsync daemons are running, ssh works, and in theory all is well. But... I'm getting an average of maybe 15 Mb/s rsyncing between them. Now, I know I have an issue in the way they're connected... one is attached to a Cisco 2970 (1 Gb/s...

I am trying to use: ocfs-support-1.0.10-1 ocfs-2.4.21-EL-smp-1.0.11-1 ocfs-tools-1.0.10-1 with RedHat AS 3.0, 2-node cluster with shared SCSI. 2 dell 1650s, dual CPUs, PERC 3/DC cards chained to a PowerVault 220S. I am using lvm, and here is my layout: [root@cluster1 archive]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 32G 5.1G 25G 17% / /dev/sda1 99M 15M 79M 16% /boot none 1.8G 0 1.8G 0% /dev/shm /dev/V...

...rt, so anything is helpful at this point!!! -brian [global] netbios name = mvppvt125 realm = MACHINEVISIONPRODUCTS.COM security = ads preferred master = no encrypt passwords = yes wins server = 10.0.0.119 workgroup = MVP password server = * server string = Dell PowerVault Server log level = 3 log file = /var/log/samba/smbd.log max log size = 50 winbind use default domain = yes winbind nested groups = yes winbind separator = + client ntlmv2 auth = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 username map = /etc/sa...

...ng to stress test a new Dell PowerEdge server and find the limits of its hardware and my tuning. Here are the server stats: * 2x Xeon 2.8 with SMP compiled, hyperthreading NOT compiled in kernel * 4 GB of RAM, 8 GB of swap on Raid 1 (15K RPM drives) for speed * User Data is on Raid 5 in a detached PowerVault Contents of /boot/loader.conf: kern.ipc.maxsockets=32768 kern.ipc.nmbclusters=32768 kern.ipc.nmbufs=131072 kern.ipc.nsfbufs=6656 kern.ipc.shm_use_phys=1 kern.maxfiles=32768 kern.maxproc=8192 kern.maxswzone=33554432 kern.nbuf=16384 kern.ncallout=32768 kern.vm.kmem.size=268435456 kern.vm.pmap.shpgp...

...g kernel 2.4.x. Currently we are running 2.4.16 on our producton system and we have a rather complicated hardware/software RAID configuration on the box. Now for the details of my system. See http://w3.one.net/~djflux/graphics/raiddiag.png for a graphic of our RAID configuration. We have 2 Dell PowerVault 220S filled with 15K 18GB SCSI drives. Each drive in PowerVault 1 is hardware mirrored to the corresponding drive in PowerVault 2. I then use Linux software RAID0 to create a stripe across these 12 drives (/dev/md0). This setup is kind of convoluted due to hardware restraints (a Dell PERC3QC RA...

...disk full error when saving from Photoshop but have no issues copying/moving etc files to/from the share outside of PS. Well, after some testing, the problem as been narrowed down to a Linux filesystem issue, well at lest this is my current thinking. To explain. ----------- We have 2 x 2TB Dell Powervault arrays, both identically formatted and mounted on the same Dell PowerEdge server, no issues. If i create a share on /dev/sdb, Photoshop will not save to that share, disk full error If i create a share on /dev/sdc, no problems. In both cases, the options for the shares are identical (apart from...

Thanks for your help in adance !!! I work with SAMBA HEAD since alpha24. I have running a BDC, PDC, Printserver on 3 separate pc's. In my domain is integrated a nativ w2k Fileserver ( Dell Nas PowerVault 725 ) for fileserving. Passwords are held in LDAP on every (Linux) machine pam-ldap works. Every thing was fine before the last update to BETA 3. Problem : I was updating from BETA 2 to BETA 3 and changing to the new Samba schema V3 ( sambaSAMAccout ). Since this point i am not able to add any...

...machine, one for raw iscsi- devices and one for those same iscsi devices device-mapped by multipath. They look like this: <pool type='iscsi'> <name>iscsi01</name> <source> <host name='10.3.1.15'/> <device path='iqn.1984-05.com.dell:powervault.md3200i.6782bcb0000859f3000000004d3eec7d'/> </source>...

Hi, Someone already use xen as production server? For example: 3 domains (mail, proxy and web server). And what about stability? Regards, Marlon _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...074, count = 1 Sep 12 07:45:14 nfs0020 kernel: EXT3-fs error (device sd(8,33)): ext3_free_blocks: Freeing blocks not in datazone - block = 806949550, count = 1 Once this has occured, some files have IO errors and a fsck deletes them. The hardware being used are Dell 2650s with 2 PERC 4DC and 4 PowerVaults configured in joint bus mode. The MegaRaid driver being used is 2.00.7 Any help would be greatly appreciated. Thanks Chris L