search for: pointtopoint

...;") in new stack -- Executing NoOp("CAPI[contr4/86986114]/105", "") in new stack -- Executing NoOp("CAPI[contr4/86986114]/105", "") in new stack I have confirmed with the telco that ISDN services come with Caller ID by default. The ISDN mode is pointtopoint. cheers -r

...something on the beginning of the session... Here's the session from OpenPhone: 2004/09/21 14:52:35.219 2 RasSrv.cxx(2224) GK Read from 216.119.135.3:2367 2004/09/21 14:52:35.223 3 RasSrv.cxx(2237) GK admissionRequest { requestSeqNum = 40386 callType = pointToPoint <<null>> endpointIdentifier = 9 characters { 0032 0031 0032 0033 005f 0065 006e 0064 2123_end 0070 p } destinationInfo = 1 entries { [0]=dialedDigits "835218329287863" } srcInfo = 2 entries { [...

...tc/asterisk # cat capi.conf ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=91xxxxxxx incomingmsn=* controller=1 softdtmf=1 accountcode= context=pstn ;echosquelch=1 ;echocancel=yes ;echotail=64 callgroup=1 deflect=91xxxxxxx devices=2 ;PointToPoint (55512-0) ;for outgoing calls use example 5551212 ;and in dialplan you can use callerid like ;exten => _0XXX.,1,StripMSD,1 ;exten => _XXX.,2,Dial,CAPI/55512${CALLERIDNUM}:bBYEXTENSION ;============================================================ mode=immediate ;isdnmode=ptp ;msn=55512 ;contro...

...t configs on the GK, but always come up with the same error. It appears to me that asterisk successfully registers with GK as I can see the aliases and the e.164 numbers, but when the h323 softphone tries to call my IAX softphone, I get this: admissionRequest { requestSeqNum = 2 callType = pointToPoint <<null>> endpointIdentifier = 9 characters { 0033 0032 0039 0037 005f 0065 006e 0064 3297_end 0070 p } destinationInfo = 1 entries { [0]=dialedDigits "100" <--------------------no IP ???????????...

Hello configuration as follows, dial-out works: capi.conf: [hfcpci] ;;PointToPoint (55512-0) isdnmode=MSN incomingmsn=* ;msn=61 controller=1 devices=2 context=incoming extensions.conf: [incoming] exten => _XX,1,Playback(demo-abouttotry) exten => _XX,n,Dial,SIP/xlite1 exten => _XX,n,HangUp When call is placed, the following debug info is shown, after the last line, it...

Hi all, I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300 to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can somebody help me? Ganbaa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

Hi, i heard many things about tinc, good and not so good :-), so i tried for myself. First, we use here a larger vpn (about 30 subnets) at time with OpenVPN. OpenVPN only supports PointToPoint connections so the setup is complex. Many transport Networks, many routes. The examples from your Webpage are nice, but i think a nicer way to use the strengh of tinc is: We define a Subnet where all routers are, for example: 172.120.121.0/24 With tinc its now easy to configure this on every...

Hello, I successfully built a vpn between two hosts ("main" and "iquique") (and its SubNets), but I have problems when I want to add another host ("valparaiso"): I get a lot of Duplicates packets everywhere and a very slow vpn. I guess that is a routing problem, but I have try with a lot of alternatives without result. I have try with "switch",

...ty also dumps meaningful information - indicating that it indeed recognises the card. chan_capi version - CVS as of Sep 2, 2005 from chan-capi.sf.net I read comments on voip-info about 2.6.12 kernel breaking something, but the patch was for capi 0.3.5, not sure it applies... capi.conf: [hfcpci] ;;PointToPoint (55512-0) isdnmode=ptp incomingmsn=61 msn=61 controller=1 devices=2 context=capi-in extensions.conf [capi-in] exten => 61,1,Dial,SIP/xlite1 exten => s,1,HangUp [sip] exten => _XX,1,SetCallerId(0) exten => _XX,2,Dial(CAPI/hfcpci/b17) capiinfo: Number of Controllers : 1 Controller 1:...

......k } port = 1720 } activeMC = FALSE conferenceID = 16 octets { 80 d4 bf de d3 8a d9 11 8e 4c 00 01 02 3f c2 76 .........L...?.v } conferenceGoal = create <<null>> callType = pointToPoint <<null>> sourceCallSignalAddress = ipAddress { ip = 4 octets { c0 a8 01 97 .... } port = 32822 } callIdentifier = { guid = 16 octets { 30 d4...

Hi Michael and Everyone I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm getting this error "reason 24 (Call ended with Q.931 cause)" I've checked the Asterisk wiki and several other resources. Please can anyone give me a hint on what the problem is I reach my wits end. Thanks Tola my config and debug Configuration of OpenH323 channel driver

...b4b5b6b7b8b9babb'H 18:44:37:842 } 18:44:37:842 conferenceGoal = { 18:44:37:843 create = { 18:44:37:843 NULL 18:44:37:843 } 18:44:37:843 } 18:44:37:843 callType = { 18:44:37:843 pointToPoint = { 18:44:37:843 NULL 18:44:37:843 } 18:44:37:843 } 18:44:37:844 sourceCallSignalAddress = { 18:44:37:844 ipAddress = { 18:44:37:844 ip = { 18:44:37:844 'c0a80014'H 18:44:37...

Hello I have serious problem with zhone z-plex 10 the device sometimes get red alarm on some channel and then the device suddenly shutdown. I try to unplugged the power chord and plug again, but the device still didn't up. I have to wait for long time to get this device up again. How can i fix this problem, so i can get this device immediately? Eris Riswanto