search for: pin2

...ll How do i set a connection between 2 asterisk servers via PRI In Bri I would set one to NT and TE How shoud the zapata.conf and zaptel.conf look And how should the cable be? All I got on the web was to set one to "pri_net"...this cant be all? And the cable > pin1 <--> pin4> pin2 <--> pin5> pin3 <--> pin6> pin4 <--> pin1> pin5 <--> pin2> pin6 <--> pin3> pin5 <--> pin8> pin8 <--> pin7 Please Help and advice Thanks Altus

...etup... I'm trying to create a phone conference line that users would call using a unique phone number (no matter if they are moderators or just plain users). I use Asterisk 1.2.6 The available conferences are defined as follows: conf => 1000,user pin1, moderator pin1 conf => 1001,user pin2, moderator pin2 conf => 1002,user pin3, moderator pin3 ... conf => 1009, user pin9, moderator pin9 The users are prompted whether they are a moderator or a user. When they choose, they are redirected to the conference they request: - using options aAPsX for moderators (moderator + marked + a...

...to work... I suspect I wired it up incorrectly, so I thought I'd see if anyone can point me in the right direction. Digium tech support pointed me to this doc for a standard T1 cable: http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm which looks like it means: pin1 = recieve ring pin2 = recive tip pin4 = send ring pin5 = send tip So I treated the bottom part of the diagram like a noraml cat5 cable & connected it in this way: Zap side | 2572 side -------------------- pin 1 <=> pin 25 pin 2 <=> pin 21 pin 4 <=> pin 10 pin 5 <=> pin 6 on the T1 side...

...t paranoid, but it's supposed to cooperate with - * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ - * is so screwy. Thanks to Brian Perkins for testing/hacking this beast - * fanatically on his truly buggy board. - */ -static inline void check_timer(void) -{ - int pin1, pin2; - int vector; - - /* - * get/set the timer IRQ vector: - */ - disable_8259A_irq(0); - vector = assign_irq_vector(0); - set_intr_gate(vector, interrupt[0]); - - /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O API...

...t paranoid, but it's supposed to cooperate with - * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ - * is so screwy. Thanks to Brian Perkins for testing/hacking this beast - * fanatically on his truly buggy board. - */ -static inline void check_timer(void) -{ - int pin1, pin2; - int vector; - - /* - * get/set the timer IRQ vector: - */ - disable_8259A_irq(0); - vector = assign_irq_vector(0); - set_intr_gate(vector, interrupt[0]); - - /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O API...

...le-->| Span2 | | Span3 |--E1 crossover cable-->| Span3 | | Span4 |--E1 crossover cable-->| Span4 | +-------+ +-------+ The basic configuration seems ok, since zttool shows the links are OK. I'm using this UTP cat5 cross-cable (not shielded): pin1 <--> pin4 pin2 <--> pin5 pin3 <--> pin6 pin4 <--> pin1 pin5 <--> pin2 pin6 <--> pin3 pin5 <--> pin8 pin8 <--> pin7 I'm not really sure this is correct, since I've found only how to connect pins 1,2,4 and 5. The other pins are connected as I supposed it should...

...2.6.0 and I stopped now with configuration of genericups driver. Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows: PIN | PC | UPS __________________________________________________________________________________ Pin1 | DCD | described as DTR (must keep Hi) Pin2 | RxD | AC Power fail (NO, connected to pin4 UPS ground in case of AC failure) Pin3 | TxD | N/A Pin4 | DTR | UPS ground Pin5 | GND | Battery low (NO, connected to pin4 UPS ground in case of LB) Pin6 | DSR | 1. described as UPS RxD and 2. 3 seconds Hi (UPS shutdown)...

...nd great ! Though I ended with error from log below. Had no chance to fix it yet: ? CPU: AMD QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) Performance Events: PMU not available due to virtualization, using software events only. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 2) ... ....... failed. ...trying to set up timer as Virtual Wire IRQ... ..... failed. ...trying to set up timer as ExtINT IRQ... ..... failed :(. Kernel panic - not s...

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

...to work... I suspect I wired it up incorrectly, so I thought I'd see if anyone can point me in the right direction. Digium tech support pointed me to this doc for a standard T1 cable: http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm which looks like it means: pin1 = recieve ring pin2 = recive tip pin4 = send ring pin5 = send tip So I treated the bottom part of the diagram like a noraml cat5 cable & connected it in this way: Zap side | 2572 side -------------------- pin 1 <=> pin 25 pin 2 <=> pin 21 pin 4 <=> pin 10 pin 5 <=> pin 6 on the T1 side...

...CE: The hardware reports a non fatal, correctable incident occurred on CPU 0. (XEN) Bank 1: f200000000000101 (XEN) Intel machine check reporting enabled (XEN) I/O virtualisation disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. (XEN) ...trying to set up timer as Virtual Wire IRQ... works. (XEN) Platform timer is 3.579MHz ACPI PM Timer EN) Allocated console ring of 16 KiB. (XEN) APIC error on CP...

...icks pass... */ @@ -2146,7 +2158,7 @@ int timer_uses_ioapic_pin_0; * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. */ -static inline void check_timer(void) +static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector;

...icks pass... */ @@ -2146,7 +2158,7 @@ int timer_uses_ioapic_pin_0; * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. */ -static inline void check_timer(void) +static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector;

...uration of genericups driver. > > Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows: > > PIN | PC | UPS > __________________________________________________________________________________ > Pin1 | DCD | described as DTR (must keep Hi) > Pin2 | RxD | AC Power fail (NO, connected to pin4 UPS ground in case of AC failure) The genericups driver does not have a setting to use the PC RxD line as a contact-closure input. It seems to be possible if the other software is using it, but genericups can only send a BREAK signal (rather than...

...al, 48 bits virtual at boot time : [root at xxxx ~]# dmesg | egrep -i 'clock|tsc|time' kvm-clock: Using msrs 12 and 11 kvm-clock: cpu 0, msr 0:18c1901, boot clock ACPI: PM-Timer IO Port: 0xb008 kvm-clock: cpu 0, msr 0:1e16901, primary cpu clock ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Switching to clocksource kvm-clock uhci_hcd 0000:00:01.2: setting latency timer to 64 rtc_cmos 00:01: setting system clock to 2011-12-15 09:33:28 UTC (1323941608) ata_piix 0000:00:01.1: setting latency timer to 64 Clocksource tsc unstable (delta = -547592984 ns) [root at xxxx ~]# cat /sys/devic...

...he phone of the hook the 'Total/Conf/Act goes' to 24/24/1. When I "cat /dev/zap/24" with the phone off the hook, I get random data, and talking into the phone or hitting keys changes this data, indicating the TMD's adc is working. PHONE CONNECTION: The Tip is connected to Pin2 on the 50pin Centronics, ring is connected to Pin27. Ring is 46V below Tip on hook and 6.7V below off hook. Is this the right connection for channel 24? Why is there no dial tone coming through? ASTERISK: On the Asterisk side, I can set up sip phones and trunks, but no matter how hard I try, I h...

...; - if (timer_irq_works()) { + if (mach_timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); setup_nmi(); @@ -2307,7 +2308,7 @@ static inline void check_timer(void) * legacy devices should be connected to IO APIC #0 */ setup_ExtINT_IRQ0_pin(apic2, pin2, vector); - if (timer_irq_works()) { + if (mach_timer_irq_works()) { printk("works.\n"); if (pin1 != -1) replace_pin_at_irq(0, apic1, pin1, apic2, pin2); @@ -2337,7 +2338,7 @@ static inline void check_timer(void) apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fi...

...; - if (timer_irq_works()) { + if (mach_timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); setup_nmi(); @@ -2307,7 +2308,7 @@ static inline void check_timer(void) * legacy devices should be connected to IO APIC #0 */ setup_ExtINT_IRQ0_pin(apic2, pin2, vector); - if (timer_irq_works()) { + if (mach_timer_irq_works()) { printk("works.\n"); if (pin1 != -1) replace_pin_at_irq(0, apic1, pin1, apic2, pin2); @@ -2337,7 +2338,7 @@ static inline void check_timer(void) apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fi...

...e enabling vector: 00000000 (XEN) ESR value after enabling vector: 00000000 (XEN) Error: only one processor found. (XEN) ENABLING IO-APIC IRQs (XEN) Setting 2 in the phys_id_present_map (XEN) ...changing IO-APIC physical APIC ID to 2 ... ok. (XEN) init IO_APIC IRQs (XEN) ..TIMER: vector=0x41 pin1=2 pin2=0 (XEN) Using local APIC timer interrupts. (XEN) Calibrating APIC timer for CPU0... (XEN) ..... CPU speed is 2600.0929 MHz. (XEN) ..... Bus speed is 200.0070 MHz. (XEN) ..... bus_scale = 0x0000CCD7 (XEN) Time init: (XEN) .... System Time: 20000524ns (XEN) .... cpu_freq: 00000000:9AFB7DF0 (XEN) ....