search for: pickuping

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hi all, how can I pickup a call from a queue? Which context parameter do I have to specify? The context that calls the queues application is ext-queues. This is what I tried so long (777 is the extension of the queue I want to pickup from): exten => _**ZXX,1,Noop(Attempt to Pickup ${EXTEN:2} by ${CALLERID(num)}) exten => _**ZXX,n,Pickup(${EXTEN:2}@from-did-direct) exten =>

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

hello, is there some way to notify people in the same pickup group about call from caller to callee? i.e. i have call from 111 to 222 there are 222,333,444 in the same pickup group 333,444 see on the phone (aastra) that 111 calling to 222 and can pickup the call with *8 siemens have this on their sip openstage phones. how they do this? thanks -- --------------------------------------- Marek

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

In the list I found some messages that *8 doesn't work so well. Is there any possibility to create a extention that you can call, and if you are fast enough, pick up a number? (Also if you are outside your callgroup) like pseudo code: exten => 888, 1, EnterPhoneNumber() exten => 888, 2, EnterPass() exten => 888, 3, TransferCallToThisPhone() exten => 888, 103, Invalid()

Hi! > How to do this ?? > To proceed with your answer on PICKUPMARK, where do I put this ??? Look at the example for Asterisk 1.4 on this page: http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup Philipp

Looks to me your server is hacked through the webserver of website. Stop apache, flush the postfix queue, are there new mails entering you postfix queue? If not, hunt down the leak, if it does, its not apache2 ;-/ Greetz, Louis > -----Oorspronkelijk bericht----- > Van: HomerWSmith at lightlink.com > [mailto:owner-postfix-users at postfix.org] Namens Homer Wilson Smith >

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

Hi All, How to park and pickup a call? The scenario of park and pickup described as below. UserA made a call to UserB, and the call ware connected, Then UserB parked (or hold) the call, and told UserC to pickup the call on one line, and then, UserC pressed some keys to pickup the call. Who can tell me what's the Park/Pickup's typical flow in the Asterisk. And how to set the sip.conf,

Hi, according to the description of Pickup() on page http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup I can use this command to pickup a call at a certain extensions. When I try this with e.g. exten => *8200,1,Pickup(200) Asterisk tells me that the highest value for the Pickup command is 63. Wenn I enter the number of a callgroup instead of an extension, I can pickup the call.

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

I'm using the Debian Sarge package of Asterisk - 1.0.7 + bristuff. When I call from a zap channel or a SIP phone to another SIP phone, then dial *8 from a third SIP phone, I get 503 Service Unavailable on the third phone and I get this at the Asterisk console: Jun 28 09:01:24 DEBUG[16774]: res_features.c:1709 ast_pickup_call: No call pickup possible... Jun 28 09:01:24 NOTICE[16774]:

Greetings list, We recently installed some Linksys SPA962 + SPA932 sidecars into a client's offices. The BLF functionality works fine, but call pickup using the BLF is something of an issue. Following the advice on voip-info.org, I configured part of their dialplan as follows: exten => _**2XX,1,Pickup(SIP/${EXTEN:2}) exten => _**2XX,n,Dial(SIP/${EXTEN:2},15,tw) exten =>

What's the proper syntax for implementing directed call pickup? Running cvs-head from today (9/24/05 including Mark's fixes), and tried: exten => *99,1,Pickup(${EXTEN:3}) but that does not seem to work, and there isn't an example in the configs directory. 'show application pickup' suggests the above should work with our sip phones, but apparently I'm missing

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Getting module_request errors from SELinux. Errors being thrown by metacity sendmail.postfix cleanup trivial-rewarite local postdrop pickup All errors are essentially the same System was working well until I began to apply some basic security hardening configuration. Postfix started complaining when I made /tmp noexec, nodev, nosuid, and then did a mount --bind of /var/tmp under

Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first rings at my phone and in the second i can see the callers number. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",