search for: pe1850

I have just loaded up CentOS4.1 on a PE1850 with twin Intel x86_64's. When I came to clean out those packages I didn't want (because some always creep in however careful you are), apart from those with dependencies, I notice a lot of cases where there are two packages of the same name installed - one clearly an x86 package and one a...

Howdy, I built an LXC container with an "image" of asterisk 11.18 precompiled and installed. It runs fine on the dev platform, which is a Dell R320 running Ubuntu 14.04LTS. I shutdown the container, tarred it up, and untarred on a Dell PE1850, also running Ubuntu 14.04LTS. The container itself is Ubuntu 14.04LTS. Both platforms as far as I know are amd64. The container boots fine on the 1850, but trying to run asterisk segfaults. The source tree was still in the container, so I just did a make clean; make; make install. It now r...

...''ve tried.. I''ll try to > build up a Xen vs. non-Xen kernel tomorrow or Tuesday and > grab a diff for you. Which PE models are they? We have quite a few different Dell PowerEdge models running 24x7 in the test lab, and don''t see any problems. (I know that we have PE1850/2650/2850 and some 4 socket boxes too). Ian _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...9;s experiences are WRT systems becoming unresponsive (unable to ssh in, etc) for brief periods of time when a large amount of IO is being performed. It's really starting to cause a problem for us. We're on Dell PowerEdge 1955 blades - but this same issue has caused us problems on PE1950, PE1850, PE1750 servers. We're running Centos 4.5 right now. I know Centos 5 includes ionice, more io scheduler/elevator selections like deadlock/etc. Perhaps that would fix this issue. We're running the latest PERC firmware. The specific issue I'm referring to at this point is on a system r...

....net> wrote: > > Howdy, > > I built an LXC container with an "image" of asterisk 11.18 precompiled and > installed. It runs fine on the dev platform, which is a Dell R320 running > Ubuntu 14.04LTS. I shutdown the container, tarred it up, and untarred on a > Dell PE1850, also running Ubuntu 14.04LTS. The container itself is Ubuntu > 14.04LTS. Both platforms as far as I know are amd64. > > The container boots fine on the 1850, but trying to run asterisk > segfaults. The source tree was still in the container, so I just did a > make clean; make; ma...

...(yes, that's over 7 years!)) with the libc5 libs loaded.? The server hardware is just about ready to fly apart, and I need to see about running this on more modern hardware.? Of course, they already have bought the replacement server, a Dell PowerEdge 1850.? No way RH 5.2 is going to load on a PE1850 with the megaraid PERC 4e/Si. Now, I've thought about a couple of possibilities: 1.)?? QEMU or VMware or similar running a RH5.2 instance under CentOS 4; 2.)?? Running a libc5 setup on CentOS 4.? I'd rather do this, as security fixes would at least be available. Going back to a RH5 mach...

Hello everybody, I am sorry to bring this up again if this kind of echo issue has ever discussed. Phone2 in below call path experiences quite annoying echo: Phone1 --> FXS (TDM400P) --> Asterisk --> SIP GW --> PSTN --> Phone2 It is annoying as on phone2, we can hear the whole words we say with the level of maybe 25% of the original sound. I can reduce the echo to maximum with

Hi there! I am currently setting up a Xen box on 3 VLans, each VLan interface is in a bridge and currently, dom0 is reachable from on of these and is performing great. My only problem is with domU : it can ping anything but it won''t work for TCP and UDP protocol UNLESS I do a manual tcpdump on my vlan interface. Bridges on dom0: xen-vl97 8000.001372529fbf no

Hello all: For fun, I am learning about Asterisk, and trying to get Asterisk working at my house. I installed Asterisk@Home. It seems to be functioning fine. I installed a couple of softphones, and have them registered with Asterisk. I actually work for a CLEC, and I have registered my Asterisk box with SER (which I don't begin to understand yet) at the office. In order to try to