search for: pciconf

...k with 8.0-RELEASE either. $ ifconfig em0 em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> ether 00:27:0e:1e:5e:e3 inet XXXXXXXX media: Ethernet autoselect status: no carrier pciconf -lv: em0@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10f08086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet em1@pci0:5:1:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00 vendor = 'Intel Corpo...

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

I just merged drm (Direct Rendering) from HEAD. - Support for latest Intel chips - Support and fixes for many AMD/ATI chips r500 and below - Support AMD/ATI IGP based chips (rs690/rs485) - Lots of code cleanups - Lots of other fixes and changes since the existing drm is 2+ years old If you are experiencing a "garbled" screen with

Hello all, I have problems with enabling support for SMBus on STABLE. My motherboard is ICH3 (82801CA). As suggested in LINT I added 3 lines to my kernel config: device smbus device ichsmb device smb But after compiling, installing and rebooting /dev/smb[01] are not available and no changes in kernel startup messages either. So I

I sent an email out to freebsd-net without a response, soo this is my last attempt at getting any assistance here. I have a QLE3142-CU-CK (rebranded NetXen NX3-20GCU w/ NX3031 chipset) with no driver support in *BSD from anything I saw. I came across solaris's ntxn driver which seems to work appropriately but I have no use for solaris as a host o/s. Naturally I'll attempt at trying to get

...rc). When I kldload if_ath I get this: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: <Atheros 5212> mem 0xc9000000-0xc900ffff irq 18 at device 1.0 on pci5 ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 3 device_attach: ath0 attach returned 6 # pciconf -l | grep ath ath0@pci0:5:1:0: class=0x020000 card=0x2052168c chip=0x001a168c rev=0x01 hdr=0x00 Full pciconf: http://junk.quis.cx/unvZDYnA/blackbox.pciconf.txt Could you please help me out ? Do you want more info ? -- Jille

We have upgraded a box from 6.2 to 6.3-RELEASE. Afterwards the box does not recognize its ST Lab I-160 serial card with Netmos 9845 Chipset. It worked flawlessly on 6.2 with puc(4) driver. >From dmesg: pci1: <simple comms, UART> at device 8.0 (no driver attached) ~# pciconf -l -v | grep -B 4 UART none2@pci1:8:0: class=0x070002 card=0x00041000 chip=0x98459710 rev=0x01 hdr=0x00 vendor = 'MosChip Semiconductors (Was: Netmos Technology)' device = 'Nm9845 Parallel/Serial Port Adapter' class = simple comms subclass = UART Ke...

Sorry for the repost... I don't think the first one posted.. posted to freebsd.stable, freebsd-current, Freebsd-hardware I checked the hardware in the online documentation manual/hardware It only lists the bits and peices of the machine say the hard drive controller and so forth. but doesn't give you a particular system to look at as a working machine with FreeBSD 6.2 does anybody

...k DWL-G520M PCI wireless card. I'm not interested in super-G or any other post-802.11b feature in particular; the reason I got it was because the marketing materials hinted that (at least some revision of it) had the Atheros chipset. It isn't recognized at all by ath(4) on 5.5. Here is the pciconf -lv section: none0@pci0:14:0: class=0x020000 card=0x3a681186 chip=0x0020168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' class = network subclass = ethernet The hardware version, as marked on the box, is A1, and firmware version 1.0.0.28. I also trie...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet re1@pci0:2:0:0: class=0x020000 card=0x...

...;Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.5.15> port 0xece0-0xecff mem 0xd9f00000-0xd9f7ffff,0xd9ffc000-0xd9ffffff irq 44 at device 0.1 on pci4 ix1: Using MSIX interrupts with 9 vectors ix1: Ethernet address: 90:e2:ba:29:c0:55 ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ... pciconf says: ix0 at pci0:4:0:0: class=0x020000 card=0x7a118086 chip=0x10fb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82599EB 10-Gigabit SFI/SFP+ Network Connection' class = network subclass = ethernet but both manuals ixgb and ixgbe menti...

Hi, After updating from 7.0-RELEASE to STABLE (around 15/08) my NIC refuses to handle large file transfers. pciconf -lv re0@pci0:4:0:0: class=0x020000 card=0x001a6409 chip=0x816910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller' class = network subclass = ethernet Log messages: re: watchdo...

Hello! I have an old Dell Latitude C800 laptop (with Pentium3 CPU in it). FreeBSD 6.3-STABLE was running fine on it, but I decided to update the machine to 9.1-STABLE. Well, neither my own custom kernel, nor even the official 9.1-RELEASE CD1 would boot... In both cases the boot process runs up to detecting uhub0, then either hangs forever or shuts off after a short while. Again, I thought I

TB --- 2003-08-09 16:00:12 - starting RELENG_4 tinderbox run for i386/pc98 TB --- 2003-08-09 16:00:12 - checking out the source tree TB --- cd /home/des/tinderbox/RELENG_4/i386/pc98 TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -rRELENG_4 src TB --- 2003-08-09 16:00:12 - /usr/bin/cvs returned exit code 1 TB --- 2003-08-09 16:00:12 - ERROR: unable to check out the source tree TB ---

Hi, I have a little problem with dc10, dc11. I use three quad dc cards, so far from dc0 up to dc8 with no problems. All (dc0 to dc11) are displayed correctly with pciconf and with ifconfig. The trouble is with dc10 and dc11 that they don't send any data out and also don't react to arp requests etc. - at least using tcpdump won't show anything coming in or going out. Monitoring from an external system, this is the same. According to the blinkinglights on...

Hi, How can I load the alpm(4) module for SMBus support on my ASUS Vintage AH-1 system? It appears the I/O range it uses is claimed by the acpi(4) driver. Can I override the mapping in some way i.e. tell ACPI not to claim the range? I don't see anything obvious about this in the acpi(4) man page. thanks, BMS

...IMPLEX,MULTICAST> metric 0 mtu 1500 options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS UM,TSO4,VLAN_HWTSO> ether 90:e2:ba:29:c0:55 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier and pciconf: ix0 at pci0:4:0:0: class=0x020000 card=0x7a118086 chip=0x10fb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82599EB 10-Gigabit SFI/SFP+ Network Connection' class = network subclass = ethernet Secondly how is this fixable: RX Descript...

...veral Mac Minis via the memstick image; they seem to be pretty good little boxes for things like offsite secondary nameservers, for example, and they're easily replaced in case of problems. However, the newest minis have slightly different hardware, and FreeBSD can't find the built-in NIC. pciconf -lv on the new mini shows it as none3 at pci0:1:0:0: class=0x020000 card=0x168614e4 chip=0x168614e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' class = network subclass = ethernet The previous edition mini (that works) reports bge0 at pci0:2:0:0: class=...

...y get lost inside the card.) The error counters on the switch does not increment. I do not see packet loss if the machine originate the packets, for example ping6 from the machine. Also ipv4 packets do not have any packets loss. If I do not use vlans, I don't see packet loss with ipv6 either. pciconf -l of the ethernet cards: ix0@pci0:129:0:0: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00 ix1@pci0:129:0:1: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00 ix2@pci0:131:0:0: class=0x020000 card=0x00038086 chip=0x10fb8086 rev=0x01 hdr=0x00 ix3@p...