search for: pci3

...brgphy3 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=4 # grep bge /var/run/dmesg.boot bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bf0000-0xf6bfffff, 0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: <MII bus> on bge0 bge0: Ethernet address: 2c:76:8a:54:08:14 bge1: <Broadcom unknown BCM5719, ASIC r...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello All, I have had a problem detecting the network card on my notebook when ACPI is enabled for a year. The problem still exists in 7.1-RELEASE. with ACPI: ... bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8 bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). bge0: couldn't

...subclass = ethernet re1@pci0:2:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet /var/log/messages: pci3: <ACPI PCI bus> on pcib6 Dec 2 17:37:21 nas kernel: re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe5ff000-0xfe5fffff,0xfdef 0000-0xfdefffff irq 16 at device 0.0 on pci3 Dec 2 17:37:21 nas kernel: re0: Unknown H/W revision: 3c400000 Dec 2 17:37:21 nas ker...

Anybody successfully using the Stallion EC8/32-AT on -stable? I just tried using the one I got on ebay and found that it hands on port close and passes no characters at all. Do any of the stallion cards work? Warner

...e 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci3 pci4: <ACPI PCI bus> on pcib2 amr0: <LSILogic MegaRAID 1.53> mem 0xf6010000-0xf601ffff irq 20 at device 2.1 on pci3 amr0: <Series 466> Firmware F.02.02, BIOS B.02.01, 16MB RAM aac0: <Adaptec...

...e0: firmware handshake timed out, found 0x4b657654 bge0: firmware handshake timed out, found 0x4b657654 bge0: EEPROM read timed out bge0: failed to read EEPROM device_attach: bge0 attach returned 6 bge1: <Broadcom BCM5703 B0, ASIC rev. 0x1100> mem 0xe8600000-0xe860ffff irq 21 at device 1.0 on pci3 miibus0: <MII bus> on bge1 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:21:5e:4d:05:c8 any hints? P.S. I see EEPROM timeout fixes were already merged to RELENG_6...

...hat doesn't work. If I compile a custom kernel without any network drivers in it, and then kldload if_txp, the following appears (same message on all 4 versions): txp0: <3Com 3cR990B-TXM Etherlink with 3XP Processor> port 0xbc00-0xbc7f mem 0xfdcff000-0xfdcff07f irq 16 at device 8.0 on pci3 txp0: not waiting for boot device_attach: txp0 attach returned -1 If I reboot and load if_nve (on 6.2 and 6-stable), then I get: nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xdc00-0xdc07 mem 0xfe02d000-0xfe02dfff irq 22 at device 20.0 on pci0 nve0: Ethernet address 00:19:21:37:d5:60...

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it would

...1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 "ppm" at mainbus0 not configured schizo3 at mainbus0: "Tomatillo", version 4, ign 7c0, bus B 0 to 0 schizo3: dvma map c0000000-dfffffff, iotdb 5a68000-5ae8000 pci3 at schizo3 cas2 at pci3 dev 1 function 0 "Sun Cassini" rev 0x20: ivec 0x7dc, address 00:03:ba:66:75:d2 brgphy1 at cas2 phy 1: BCM5421 10/100/1000baseT PHY, rev. 1 mpi1 at pci3 dev 2 function 0 "Symbios Logic 53c1030" rev 0x07: ivec 0x7e3 scsibus2 at mpi1: 16 targets, initiator 7...

...ng pcifront on freebsd domU using following sound card [ Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] Following sound driver is used for this sound card on Freebsd: *snd_csa*-- Crystal Semiconductor CS461x/462x/4280 PCI bridge device driver I am able to detect the card. pci3: <PCI bus> on pcib3 csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xfafff000-0xfaffffff,0xfae00000-0xfaefffff irq 16 at device 5.0 on pci3 csa: card is Turtle Beach Santa Cruz But going ahead IRQ resource allocations fails, before interrupt handler can be setup. I found that it fai...

...<ISA bus> on isab0 pcib1: <Host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 pcib2: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib3: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 12 -> irq 11 IOAPIC #1 intpin 13 -> irq 13 pci3: <PCI bus> on pcib3 bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf10000-0xfcf1ffff irq 11 at device 6.0 on pci3 bge0: Ethernet address: 00:06:5b:8d:20:5e miibus0: <MII bus> on bge0 brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 1...

I would also like to help as well. As KMacy knows before i asked a lot of questions for T2 types of servers but unfortunately i have no more access to those kind of hardware as well. I;m willing to participate if a team will be formated.

...> port 0x500-0x50f at device 15.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 15.1 (no driver attached) pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 2.0 on pci2 pci3: <PCI bus> on pcib3 IOAPIC #1 intpin 11 -> irq 20 IOAPIC #1 intpin 8 -> irq 21 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib4 IOAPIC #1 intpin 10 -> irq 22 amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf3ffffff irq 22 at device 0.0 on pci4 amr0:...

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...ard=0x058a1014 chip=0x1014168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5212 Atheros AR5212 802.11abg wireless' class = network subclass = ethernet ath0: <Atheros 5212> mem 0xedf00000-0xedf0ffff irq 17 at device 0.0 on pci3 ath0: [ITHREAD] ath0: using obsoleted if_watchdog interface ath0: Ethernet address: xx:xx:xx:xx:xx:xx ath0: mac 10.3 phy 6.1 radio 10.2 * Debug settings: net.wlan.0.debug: 0xdfffffff<11n,debug,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,dot1x,dot1xsm,radius,raddump,radkeys...

...irq=10 map[10]: type 1, range 32, base 000030c0, size 6 found-> vendor=0x10b7, dev=0x9200, revid=0x78 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 00003000, size 7 map[14]: type 1, range 32, base 90101000, size 7 pci3: <PCI bus> on pcib3 adv0: <AdvanSys ASC1200B SCSI controller> port 0x3080-0x30bf irq 3 at device 5.0 on pci3 adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 20 rp0: <rp> port 0x30c0-0x30ff irq 10 at device 6.0 on pci3 RocketPort0 = 8 ports rp0: driver is using old-style c...

...imer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib2 bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseT...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hi, I am using the db backend for the expire plugin and found the following error message in the logfile: dovecot: Jan 22 10:10:55 Error: dict: secondary db: unable to allocate space from the buffer cache dovecot: Jan 22 10:10:55 Error: dict: Failed to initialize dictionary 'expire' dovecot: Jan 22 10:10:55 Error: IMAP(xxxxxxxxxx): read(/var/dovecot/dict-server) failed: Remote

...et> mem 0xfcf00000-0xfcf03fff irq 11 at device 6.0 on pci1 ti0: Ethernet address: 00:02:e3:00:0d:c6 pcib2: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib8: <PCI to PCI bridge (vendor=8086 device=b154)> at device 6.0 on pci2 IOAPIC #1 intpin 9 -> irq 13 pci3: <PCI bus> on pcib8 pcib9: <PCI to PCI bridge (vendor=8086 device=b154)> at device 0.0 on pci3 IOAPIC #1 intpin 8 -> irq 16 pci4: <PCI bus> on pcib9 amr0: <AMI MegaRAID> mem 0xf0000000-0xf7ffffff irq 16 at device 0.0 on pci4 amr0: <PERC 3/DC> Firmware 1.74, BIOS...