search for: onramp

Hi, now that these cards have approval in Australia, has anyone had any luck in connecting them to a Telstra Onramp 10 service? Are these configured as a PRI, bchan=1-10, dchan=16 in zaptel.conf and switchtype=euroisdn in zapata.conf? Better yet anyone have any of the above .conf files they could share? Is an onramp 10 what is referred to as a 'channel bank'? Craig

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes callerid=a...

...'t want to upgrade Asterisk to 1.2 until I've got this all sorted, one problem at a time! Here are my configs : /etc/zaptel.conf # Global data span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17 dchan=16 unused=18-31 loadzone = au defaultzone = au /etc/asterisk/zapata.conf [channels] context=from-onramp overlapdial=yes priindication = outofband switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown signalling=pri_cpe echocancelwhenbridged=yes echocancel=128 echotraining=800 rxgain=5 ; 0 txgain=-4.5 ; 0 busydetect=no pridialplan=local internationalprefix=0011 nationalprefix=0 usecaller...

...;&&&&&&&&&&&&& -- Going to extension s|1 because of Complete received -- Executing Answer("Zap/1-1", "") in new stack -- Accepting call from '' to 's' on channel 0/1, span 1 == Spawn extension (from-onramp, s, 1) exited non-zero on 'Zap/1-1' -- Executing Hangup("Zap/1-1", "") in new stack == Spawn extension (from-onramp, h, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17 dchan=16 unused=...

Hi, I am currently trying to find a replacement for a dinosaur PBX and want to replace it with a VoIP solution. We have just moved our lines over to an Optus Multiline from a Telstra ISDN Onramp 30 service with 100 lines. My question for you good people is what sort of hardware do I need to interface Asterix into the Optus Multiline? The Optus service is terminated in my office to a SHDSL NTU from Adtran and has two RJ45 conenctors on the back of it. Has anybody tried this yet? Thanks...

Hello, We have an Asterisk 1.0.9 machine with a Sangoma A101 card fitted, it is connected to a Telstra OnRamp E1 in Melbourne, Australia. The problem we are experiencing is extreme echo and clicking noises. These are only audible to the calling party, e.g. the person calling in from the PSTN to Asterisk via the E1, the person on the SIP handset cannot hear any echo or clicking, only the PSTN side can...

I am trying to solve the fax problem by installing an E1 channelbank (Megaplex MP-104) It's a box that has 8 x FXS ports and a single E1 port. The plan was to use one of my 4 E1 ports to connect to the Telstra onramp and one to the MP104. I have since discovered however that the MP104 only supports CAS signalling and I am having trouble getting asterisk to work in this mode. Currently we have Onramp (Australian PRI) ---- port 1 of T410P --- asterisk --- port 2 or T410P --- MP104 In zaptel.conf I have span=1,1...

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV patches, which are no longer to be used). If I do # modprobe hisax type=11,11 protocol=2,2 id="HiSax" it respon...

Hello, We have 4 'Onramp-2' Telstra ISDN BRI services operating on Asterisk Server with Eicon 4BRI card. For most part the service is okay. However, we are are having problems with passing callerID to internal extensions. This is the set of command executed. exten => <pattern>,1,Answer ; Answer the line exte...

I just managed to put in a TE410 card in an Asterisk box to work with OnRamp 20(E1 downunder). I am able to dial in but was not able to dial out. Can anyone offer me some advice please? In my extensions.conf, I just put in: [default] ... exten => 0,1,Dial(Zap/g1) and I get this on the console when I dialled 0. -- Executing [0 at default:1] Dial("SIP/5166-b76004...

I would just like to get a refresh of the situation for Australian users. It would seem that the TE400P is currently available and is likely to acheive approval for use in Australia within the next 2 months ? (when is the end of summer?). Once this is done, it will certainly suit larger installations, but it still leaves a number of 'gaps'. Anyone with analog phone lines will need

On Fri, 2015-04-03 at 21:27 -0400, Digimer wrote: > Being on CentOS, it is then trivial for these > companies to switch the RHEL proper. Not if Centos and RHEL become too incompatible. -- Regards, Paul. England, EU. Je suis Charlie.

...ntOS base will stay very close. It would be > very stupid of RH to do otherwise. > Exactly, the core distro stays where it is - we add layered and enhanced options with low barriers to entry around it. yum install centos-release-gluster yum install gluster. makes for a much easier gluster onramp ( or ceph or openafs ). If you look at the projects we interface with, it will be clear that this is all in the interest of the regular established existing CentOS userbase - eg. ci.centos.org now hosts the integration testing for libvirt upstream ( I suspect most people will agree that libvirt is...

I've seen this question asked before but haven't seen a definative answer. Does the e100p work in australia? Did any one who was asking the question before bite the bullet and get one? I can get a te410 if i really have to but would prefer to stay with the cheaper option. Any comments appreciated, Thanks ------------------------------------------------- This mail sent through IMP:

Whats up to VoipJet.com? Their DNS servers are not reachable. Both primary and secondary are on the same subnet - weird setup. Thanks, David

Hi, Yet another question, now that I have callerid working correctly, I'm trying to work out how to utilise the different numbers I have. I have a 100 number range allocated to my E1/PRI/OnRamp service. My incoming calls are handled like this: Advertised/published number is an analogue line terminating on a X101P. If the analog line is busy, it has a call diversion to the PRI on a TE405P Whenever I look at a channel while a call is in progress I see something like this: Call on the analo...

...tting a > chan_capi capable device, though I haven't tried that yet. The NetJet is supposedly CAPI capable. Have you tried installing this? --> http://www.junghanns.net/asterisk/page1.html > I am about to switch from a netjet card to a TE4xxP card as soon as > possible, I have a OnRamp 10 being installed tomorrow. This is largely > to increase the number of incoming lines, but partly to resolve the > above issues, and also partly to try to resolve long running > reliability issues which may in fact be related to the TDM400P anyway. > In which case I will be lookin...

Hi Bob, Thanks for sending around the link to that. It looks mostly right and looks like a useful onramp. There are a few things to watch out for though (I've cc'ed Romain so he's aware of these comments). @romain I hope you taake the following comments as they are intended, as help rather than attacks. The largest issue I see is that the contract for Get_region is that it *populates the...

...s go through the same. The debug info from when I dialed 106 is included below. I know I am a dummy about this stuff. But I am trying to learn how it works. Have mercy on me you experts. Can any of you see what might be wrong? My guesses include two possibilities: 1. For some reason my PSTN onramp (my own company) isn't really passing the call to the PSTN as it should. 2. Even for this really basic hardcoding experiment, my extensions.conf file is too short. For example, the connection takes longer than asterisk expects, and so I need to tell it to keep waiting before playing the reco...

..., >I think US $595 + AU $10,000 fine is more than US$1495 :-) > > > >>before bite the bullet and get one? I can get a te410 if i really have to but >>would prefer to stay with the cheaper option. >> >> > >NetJet-S apparently works with ISDN BRI (E.g. onramp 2) and Asterisk, but there >are some echo issues for the local end of the call. > >There was a Melbourne guy using one, I'm not sure how he's gone in the last 4 months: > > > >>-----Original Message----- >>From: asterisk-users-admin@lists.digium.com >>[...