search for: omnivs

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u...

Hello, I am trying to get a SMART500RT1U working on CentOS and just receiving the following message when attempting to start the driver: Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U Unknown input voltage range: 0x02 Unknown number of switchable load banks: 0x01 Unit ID: 65535 Unknown protocol (3005)Attached to Tr...

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My fi...

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae - ProductID: 0001 - Manufacturer: TRIPP LITE - Product: TRIPP LITE UPS - Serial Number: unknown - Bus...

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL (http://www.tripplite.com/en/products/model.cfm?txtMod...

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbu...

...0:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 01) # lsusb Bus 001 Device 003: ID 09ae:3012 Tripp Lite Bus 001 Device 001: ID 0000:0000 However, the tripplite_usb driver doesn't seem to find the UPS: # tripplite_usb -u root -DDDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning: This is an experimental driver. Some features may not function correctly. debug level is '6' Checking device (09AE/3012) (001/003) - VendorID: 09ae - ProductID: 3012 - Manufacturer: Tripp Lite - Product: TRIPP LITE SMART2200RMXL2U - Serial Number: 9...

...some experience with this model. My system is using the latest CVS checkout of the Development branch (as of this message), and libusb(-dev) packages version 0.1.11-6. The system uses GCC 4.0 to compile. Here is the output of ./tripplite_usb -DDDDD /dev/usb/hiddev0: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 002 Tryi...

...1//dev/ugen0) usb_control_msg: 128 6 768 0 0xbfbfd050 255 1000 usb_control_msg: 128 6 769 1033 0xbfbfd050 255 1000 usb_control_msg: 128 6 768 0 0xbfbfd050 255 1000 usb_control_msg: 128 6 770 1033 0xbfbfd050 255 1000 - VendorID: 09ae - ProductID: 0001 - Manufacturer: TRIPP LITE - Product: TRIPP LITE OMNIVS1500XL - Serial Number: unknown - Bus: /dev/usb1 Trying to match device Device matches USB error: could not set alt intf 0/0: Invalid argument Detected a UPS: TRIPP LITE/TRIPP LITE OMNIVS1500XL send_to_all: SETINFO ups.vendorid "09ae" send_to_all: SETINFO ups.productid "0001" sen...

On Mar 6, 2015, at 12:51 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) > Warning: This is an experimental driver. > Some features may not function correctly. > > Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U > Unknown input voltage range: 0x02 > Unknown number of switchable load banks: 0x01 > Unit ID: 65535 &...

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But when I try to start upsd and upsmon I get May 6 15:34:03 <my host> upsd[8834]: listening on 127.0.0.1 port 3493 May 6 15:34:03 <my host> upsd[8834]: Can't connec...

...001/003) - VendorID: 09ae - ProductID: 0001 - Manufacturer: TRIPP LITE - Product: TRIPP LITE UPS - Serial Number: unknown - Bus: 001 Trying to match device Device matches Device reopened successfully Successfully reconnected send_cmd(msg_len=3, type='W') send_cmd(msg_len=2, type=' Using OMNIVS 2001 protocol (2001) send_cmd(msg_len=2, type='S') send_cmd(msg_len=2, type='P') send_cmd(msg_len=2, type='F') send_cmd(msg_len=2, type='V') send_cmd(msg_len=2, type='V') send_cmd(msg_len=2, type='U') send_cmd: send_try = 3, recv_try = 10 Unit ID not...

...arger problem with my installation (hopefully the latter). Any help would be appreciated. Thanks. In the following outputs, I deleted the entries for the USB controller and USB hubs in the interest of space. "sudo /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning: This is an experimental driver. Some features may not function correctly. ... Checking device (045E/0039) (005/004) - VendorID: 045e - ProductID: 0039 - Manufacturer: Microsoft - Product: Microsoft 5-Button Mouse with IntelliEye(TM) - Serial Number: unknown...

...39;) send_cmd: sending 3a 57 00 a8 0d 00 00 00 '.W......' send_cmd: received 57 00 0d 00 00 00 00 00 'W.......' (OK) send_cmd(msg_len=2, type=' send_cmd: sending 3a 00 ff 0d 00 00 00 00 '........' send_cmd: received 00 10 01 58 58 58 58 0d '...XXXX.' (OK) Using OMNIVS protocol (1001) send_cmd(msg_len=2, type='S') send_cmd: sending 3a 53 ac 0d 00 00 00 00 '.S......' send_cmd: received 53 31 30 00 58 58 58 0d 'S10.XXX.' (OK) send_cmd(msg_len=2, type='P') send_cmd: sending 3a 50 af 0d 00 00 00 00 '.P......' send_cmd: receiv...

Model: Tripp-lite OMNIVS1500 Error: Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: unknown/unknown libusb_set_report() returned -1 instead of 8 Could...

...e have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP LITE/ Tripp Lite SMART1500RMXL2U libusb_get_interrupt() returned -110 instead of 8 libusb_get_interrupt() returned -110 instead of 8 libusb_get_interrupt(...

Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP LITE/ Tripp Lite SMART1500RMXL2U Unit ID: 257 Unknown protocol (4)Attached to Tripp Lite Tripp Lite SMART1500RMXL2U je-nas:~/src/nut-2.2.1# upsd Network UPS T...

...at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Problems communicating with Tripp Lite SMART500RT1U via USB with CentOS 6.6 and NUT 2.6.5 On Mar 6, 2015, at 12:51 PM, Eric Cobb <Eric_Cobb at tripplite.com<mailto:Eric_Cobb at tripplite.com>> wrote: Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U Unknown input voltage range: 0x02 Unknown number of switchable load banks: 0x01 Unit ID: 65535 Unknown protocol (3005) If this is t...

This is a USB only ups. I could not make it work with nut. So I put this daemon together. Get it from http://www.vsys.org/sventura/dev/ at the bottom of the page. Init scripts are gentoo based but I think it should be easy to adjust them to any distro. I am planning to integrate it with nut if I can find the time and there is enough interest on it to justify the project. This is a very entry

...t the following output when starting the driver. >#lsusb >Bus 005 Device 002: ID 09ae:0001 Tripp Lite ># upsdrvctl -DDDD start >Network UPS Tools - UPS driver controller 2.4.1 >Starting UPS: tripplite >exec: /lib/nut/tripplite_usb -a tripplite >Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.1) >Warning: This is an experimental driver. >Some features may not function correctly. >Detected a UPS: TRIPP LITE/TRIPP LITE SMART1050SLT >Unknown input voltage range: 0x02 >Unknown number of switchable load banks: 0x00 >Unit ID: 0 >Unknown p...