search for: nutted

Hello guys, I was some years ago when I sent something to this list. NUT is a great tool but lacks SNMP management. It can access a device using SNMP but I found no way to read NUT values using SNMP. It would be very useful in order to integrate with network management software based on SNMP. As I did not find a solution, I wrote it myself. I wrote a MIB file and a SNMP agent for net-snmp

Hello guys, I was some years ago when I sent something to this list. NUT is a great tool but lacks SNMP management. It can access a device using SNMP but I found no way to read NUT values using SNMP. It would be very useful in order to integrate with network management software based on SNMP. As I did not find a solution, I wrote it myself. I wrote a MIB file and a SNMP agent for net-snmp

Hello, https://networkupstools.org/ddl/Tripp_Lite/AVR750U.html Going off of this page, it looks like this should be supported by usbhid-ups, but it seems to be failing. Attached is a log of my attempts to start the driver. Let me know what I can do to help. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I just did a fresh installation of Debian Jessie on one of my servers, but NUT won't configure and install. When I try to install, I get the following: Setting up nut-client (2.7.2-1+b2) ... Job for nut-monitor.service failed. See 'systemctl status nut-monitor.service' and 'journalctl -xn' for details. invoke-rc.d: initscript nut-client, action "start" failed.

Ok - I'm wondering is this is a systemd config bit? systemctl restart nut-driver at malaysia.service Job for nut-driver at malaysia.service failed because the control process exited with error code. See "systemctl status nut-driver at malaysia.service" and "journalctl -xeu nut-driver at malaysia.service" for details. root at malaysia:~# systemctl status nut-driver at

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Greetings all; Does nut build on an r-pi4b? I have an r-pi4b running one of my cnc machines and the power bump performance due to the size of its psu and the fairly rapid start time of my standby generator, does not allow a full powerdown restart to take place, leaving the pi in a crashed state. I've purchased a factory refurbed cyberpower ups rated at 650 WA which I intend to figure

Normally yes - enable and start the target and the particular services relevant to your setup. For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for upscode2, to currently trade driver viability for some storage traffic with more logs :\ Sorry about that, Jim On Wed, Jul 5, 2023, 02:29 Karl Schmidt <karl at lrak.net> wrote:

Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build your own in one of many ways possible :\ On Wed, Jul 5, 2023, 06:23 Karl Schmidt <karl at lrak.net> wrote: > On 7/4/23 10:01PM, Jim Klimov wrote: >

On 7/5/23 03:17AM, Jim Klimov wrote: > Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), > did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build > your own in one of many ways possible :\ I think I'm not following you - with debug 3 -->> it

On 7/4/23 10:01PM, Jim Klimov wrote: > Normally yes - enable and start the target and the particular services relevant to your setup. > > For the binary you have from packaging (if not rebuilt as suggested earlier), set debug_min=3 in ups.conf section for > upscode2, to currently trade driver viability for some storage traffic with more logs :\ > > Sorry about?that, > Jim

Jan 19 05:50:13 mars nut-monitor[849]: Signal 15: exiting Jan 19 05:50:13 mars nut-monitor[849]: Network UPS Tools upsmon 2.8.0 Jan 19 05:50:13 mars systemd[1]: Stopping nut-monitor.service - Network UPS Tools - power device monitor and shutdown controller... Jan 19 05:50:13 mars systemd[1]: nut-monitor.service: Deactivated successfully. Jan 19 05:50:13 mars systemd[1]: Stopped nut-monitor.service

Hello, I have a Raspberry Pi model B running Raspbian Stretch. I have installed version 2.7.4-5 of nut from the raspbian repos. I have a CyberPower 1500PFCLCD UPS. When I reboot the Pi, the nut-server service fails to start. root at nut:~# service nut-server status ? nut-server.service - Network UPS Tools - power devices information server Loaded: loaded

Hi Leslie, 2014-09-29 17:14 GMT+02:00 Leslie Rhorer <lrhorer at mygrande.net>: > > I just did a fresh installation of Debian Jessie on one of my > servers, but NUT won't configure and install. When I try to install, I get > the following: > > Setting up nut-client (2.7.2-1+b2) ... > Job for nut-monitor.service failed. See 'systemctl status >

On up-to-date f36, with latest kernel 6.1.7-100.fc36.x86_64. After receiving a few of these messages Broadcast message from nut at e7.eyal.emu.id.au (somewhere) UPS ups at ups is unavailable I noticed and ran sudo systemctl restart nut-driver at ups.service which triggered Broadcast message from nut at e7.eyal.emu.id.au (somewhere) Communications with UPS ups at ups established I now added

Package: nut Version: 2.0.5-3+b1 Running: Debian Testing Arch: x86_64 BUG: (the battery is relatively new (6mos) and there have been no recent power outages) Jul 28 04:29:44 p34 upsmon[2402]: UPS belkin at localhost battery is low Jul 28 05:13:15 p34 upsmon[2402]: UPS belkin at localhost battery is low Jul 28 05:14:05 p34 upsmon[2402]: UPS belkin at localhost battery is low FIX: (go back to

I've built NUT 2.8.0 from source. When the nut-monitor runs: fopen upsmon.pid fails. I'm running as root, upsmon has root:root permissions as well as the other daemons and .conf files. I've tried configuring with and without --prefixpath --prefixaltpath. Is there something I am missing? Please see attached. Dan -------------- next part -------------- An HTML attachment was

* Ubuntu 12.04 Precise * NUT 2.6 * From Ubuntu terminal ---> sudo apt-get install nut * Openups from mini-box.com (http://www.mini-box.com/OpenUPS) * - Intelligent UPS, USB interface - SMBUS slave and I2C master - Input 6-34V - Programable output 6-24V - Default output is 12V - Input/Output current 6A/10A peak - Charge between 6-30V, 3A - Voltage and current limits - Li-Ion, Li-Po,

On 19.01.24 16:20, Stefan Schumacher via Nut-upsuser wrote: >This morning at 9:50 the server stopped working unexpectedly - I was >still sleeping until 10:00, so no user intervention took place. > >Jan 19 05:50:17 mars nut-server[1303]: mainloop: Interrupted system call >Jan 19 05:50:17 mars nut-server[1303]: Signal 15: exiting >Jan 19 05:50:17 mars nut-server[1303]: Network UPS

Hello, I'm configuring the NUT package which comes with CentOS 7.X: nut.x86_64 2.7.2-3.el7 @epel nut-client.x86_64 2.7.2-3.el7 @epel I've configured NUT based on the instructions found on this page: https://www.luzem.com/2015/01/25/install-ups-in-centos-7/ which worked, except for one