Nut upsuser - Oct 2014 - NUT Installation failing under Debian Jessie

I just did a fresh installation of Debian Jessie on one of my servers, 
but NUT won't configure and install.  When I try to install, I get the 
following:

Setting up nut-client (2.7.2-1+b2) ...
Job for nut-monitor.service failed. See 'systemctl status 
nut-monitor.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript nut-client, action "start" failed.
dpkg: error processing package nut-client (--configure):
  subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nut-server:
  nut-server depends on nut-client (= 2.7.2-1+b2); however:
   Package nut-client is not configured yet.

dpkg: error processing package nut-server (--configure):
  dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nut:
  nut depends on nut-server; however:
   Package nut-server is not configured yet.
  nut depends on nut-client; however:
   Package nut-client is not configured yet.

dpkg: error processing package nut (--configure):
  dependency problems - leaving unconfigured
Errors were encountered while processing:
  nut-client
  nut-server
  nut
E: Sub-process /usr/bin/dpkg returned an error code (1)

	Running the command `systemctl status nut-monitor.service` returns:

nut-monitor.service - Network UPS Tools - power device monitor and 
shutdown controller
    Loaded: loaded (/lib/systemd/system/nut-monitor.service; disabled)
    Active: failed (Result: exit-code) since Mon 2014-09-29 10:07:58 
CDT; 2min 12s ago
   Process: 15831 ExecStart=/sbin/upsmon (code=exited, status=1/FAILURE)

Sep 29 10:07:58 RAID-Server upsmon[15831]: fopen 
/var/run/nut/upsmon.pid: No such file or directory
Sep 29 10:07:58 RAID-Server upsmon[15831]: Using power down flag file 
/etc/killpower
Sep 29 10:07:58 RAID-Server upsmon[15831]: Network UPS Tools upsmon 2.7.2
Sep 29 10:07:58 RAID-Server upsmon[15831]: Fatal error: insufficient 
power configured!
Sep 29 10:07:58 RAID-Server upsmon[15831]: Sum of power values........: 0
Sep 29 10:07:58 RAID-Server upsmon[15831]: Minimum value (MINSUPPLIES): 1
Sep 29 10:07:58 RAID-Server upsmon[15831]: Edit your upsmon.conf and 
change the values.
Sep 29 10:07:58 RAID-Server systemd[1]: nut-monitor.service: control 
process exited, code=exited status=1
Sep 29 10:07:58 RAID-Server systemd[1]: Failed to start Network UPS 
Tools - power device monitor and shutdown controller.
Sep 29 10:07:58 RAID-Server systemd[1]: Unit nut-monitor.service entered 
failed state.

	I have reported a bug, but I am unsure how to proceed at this point. 
Can anyone lend some advice?

Hi Leslie,

2014-09-29 17:14 GMT+02:00 Leslie Rhorer <lrhorer at mygrande.net>:
>
>         I just did a fresh installation of Debian Jessie on one of my
> servers, but NUT won't configure and install.  When I try to install, I
get
> the following:
>
> Setting up nut-client (2.7.2-1+b2) ...
> Job for nut-monitor.service failed. See 'systemctl status
> nut-monitor.service' and 'journalctl -xn' for details.
> invoke-rc.d: initscript nut-client, action "start" failed.
> dpkg: error processing package nut-client (--configure):
>  subprocess installed post-installation script returned error exit status 1
> dpkg: dependency problems prevent configuration of nut-server:
>  nut-server depends on nut-client (= 2.7.2-1+b2); however:
>   Package nut-client is not configured yet.
>
> dpkg: error processing package nut-server (--configure):
>  dependency problems - leaving unconfigured
> dpkg: dependency problems prevent configuration of nut:
>  nut depends on nut-server; however:
>   Package nut-server is not configured yet.
>  nut depends on nut-client; however:
>   Package nut-client is not configured yet.
>
> dpkg: error processing package nut (--configure):
>  dependency problems - leaving unconfigured
> Errors were encountered while processing:
>  nut-client
>  nut-server
>  nut
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>         Running the command `systemctl status nut-monitor.service` returns:
>
> nut-monitor.service - Network UPS Tools - power device monitor and
> shutdown controller
>    Loaded: loaded (/lib/systemd/system/nut-monitor.service; disabled)
>    Active: failed (Result: exit-code) since Mon 2014-09-29 10:07:58 CDT;
> 2min 12s ago
>   Process: 15831 ExecStart=/sbin/upsmon (code=exited, status=1/FAILURE)
>
> Sep 29 10:07:58 RAID-Server upsmon[15831]: fopen /var/run/nut/upsmon.pid:
> No such file or directory
> Sep 29 10:07:58 RAID-Server upsmon[15831]: Using power down flag file
> /etc/killpower
> Sep 29 10:07:58 RAID-Server upsmon[15831]: Network UPS Tools upsmon 2.7.2
> Sep 29 10:07:58 RAID-Server upsmon[15831]: Fatal error: insufficient power
> configured!
> Sep 29 10:07:58 RAID-Server upsmon[15831]: Sum of power values........: 0
> Sep 29 10:07:58 RAID-Server upsmon[15831]: Minimum value (MINSUPPLIES): 1
> Sep 29 10:07:58 RAID-Server upsmon[15831]: Edit your upsmon.conf and
> change the values.
> Sep 29 10:07:58 RAID-Server systemd[1]: nut-monitor.service: control
> process exited, code=exited status=1
> Sep 29 10:07:58 RAID-Server systemd[1]: Failed to start Network UPS Tools
> - power device monitor and shutdown controller.
> Sep 29 10:07:58 RAID-Server systemd[1]: Unit nut-monitor.service entered
> failed state.
>
>         I have reported a bug, but I am unsure how to proceed at this
> point. Can anyone lend some advice?
>
>
>
I realized that recently, and we're working on a 1rst attempt at a solution:
https://github.com/networkupstools/nut/issues/156

cheers,
Arno
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141009/b7b6e87c/attachment.html>

On 10/8/2014 5:16 PM, Arnaud Quette wrote:
> Hi Leslie,
>
> 2014-09-29 17:14 GMT+02:00 Leslie Rhorer <lrhorer at mygrande.net
> <mailto:lrhorer at mygrande.net>>:
>
>
>              I just did a fresh installation of Debian Jessie on one of
>     my servers, but NUT won't configure and install.  When I try to
>     install, I get the following:
>
>     Setting up nut-client (2.7.2-1+b2) ...
>     Job for nut-monitor.service failed. See 'systemctl status
>     nut-monitor.service' and 'journalctl -xn' for details.
>     invoke-rc.d: initscript nut-client, action "start" failed.
>     dpkg: error processing package nut-client (--configure):
>       subprocess installed post-installation script returned error exit
>     status 1
>     dpkg: dependency problems prevent configuration of nut-server:
>       nut-server depends on nut-client (= 2.7.2-1+b2); however:
>        Package nut-client is not configured yet.
>
>     dpkg: error processing package nut-server (--configure):
>       dependency problems - leaving unconfigured
>     dpkg: dependency problems prevent configuration of nut:
>       nut depends on nut-server; however:
>        Package nut-server is not configured yet.
>       nut depends on nut-client; however:
>        Package nut-client is not configured yet.
>
>     dpkg: error processing package nut (--configure):
>       dependency problems - leaving unconfigured
>     Errors were encountered while processing:
>       nut-client
>       nut-server
>       nut
>     E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>              Running the command `systemctl status nut-monitor.service`
>     returns:
>
>     nut-monitor.service - Network UPS Tools - power device monitor and
>     shutdown controller
>         Loaded: loaded (/lib/systemd/system/nut-__monitor.service;
disabled)
>         Active: failed (Result: exit-code) since Mon 2014-09-29 10:07:58
>     CDT; 2min 12s ago
>        Process: 15831 ExecStart=/sbin/upsmon (code=exited,
status=1/FAILURE)
>
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: fopen
>     /var/run/nut/upsmon.pid: No such file or directory
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: Using power down flag
>     file /etc/killpower
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: Network UPS Tools upsmon
>     2.7.2
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: Fatal error: insufficient
>     power configured!
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: Sum of power
>     values........: 0
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: Minimum value
>     (MINSUPPLIES): 1
>     Sep 29 10:07:58 RAID-Server upsmon[15831]: Edit your upsmon.conf and
>     change the values.
>     Sep 29 10:07:58 RAID-Server systemd[1]: nut-monitor.service: control
>     process exited, code=exited status=1
>     Sep 29 10:07:58 RAID-Server systemd[1]: Failed to start Network UPS
>     Tools - power device monitor and shutdown controller.
>     Sep 29 10:07:58 RAID-Server systemd[1]: Unit nut-monitor.service
>     entered failed state.
>
>              I have reported a bug, but I am unsure how to proceed at
>     this point. Can anyone lend some advice?
>
>
>
> I realized that recently, and we're working on a 1rst attempt at a
solution:
> https://github.com/networkupstools/nut/issues/156
	I was able to get it up and running by setting MINSUPPLIES to 0 in 
upsmon.conf and then re-configuring NUT.  I think this is now a faulty 
system, however.  With MINSUPPLIES set to zero, will NUT ever force a 
shutdown?  If I reset the value to 1, will the system behave properly?