search for: npy

Only a warning, and doesn't seem to do anything bad. But I can't seem to figure out what these warnings mean? -- Requested transfer capability: 0x00 - SPEECH [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: k [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: o [Feb 17

I'm testing an ivr implementation (first time) using: exten => 620,1,Wait,1 exten => 620,2,Answer exten => 620,3,DigitTimeout,5 exten => 620,4,ResponseTimeout,10 exten => 620,5,Background(npi-greeting) ; "Thanks for calling press 1 for" exten => 1,1,Goto(npi-directory,s,1) For initial testing, I've arbitrarily mapped this onto ext 620 (will change that later

Hello Julien, Am Mon, 14 Jan 2019 22:15:47 +0100 schrieb Julien dupont <marcelvierzon at gmail.com>: > ** Test 1 ** > On VPN_office I use 'tcpdump -npi any icmp and host 192.168.1.3' > When pinging 192.168.1.1 from client 1, with no success, I see no packet > passing. Sorry - the tcpdump command should end with "192.168.1.1" instead of

Hi, I have this setup: E1 PRI PSTN -- Asterisk -- Alcatel PBX - analog phones Can someone tell me what's wrong with this call initiating from an analog phone connected to Alcatel PBX? It dies with NOANSWER but all works if I call other destination numbers. Dialplan is a simple Dial(zap/g1/0984465691) statement. At the end you'll find also zapata.conf.

I have this setup: (PSTN E1 PRI) -- Asterisk -- (crosscable) -- Alcatel PBX --- analog phones and a few of VoIP phones directly connected to Asterisk. Calling a number (just one!) - an automatic responder (IVR) - from VoIP phones works, from analog phones doesn't work: NOANSWER after a few seconds. I'm using no 'r' in dial options (this caused a problem with an IVR some time

I have a PRI link up and running between Asterisk and a Nortel Norstar MICS v4.1 . I'm having a problem getting the textual Caller Name across the link from Ast to Ns, however numeric Caller ID arrives and displays fine. From Ns to Ast both elements come through fine. I'm forcing dummy values for testing using: exten => s,1,SetCIDName(Test) exten => s,2,SetCallerID(1234561234)

Hi! I've a problem with caller presentation, when I call a number my presentation is set to "Presentation permitted, user number passed network screening", this works for outgoing call but not for incoming, numbers are always hidden and network provided number is always screened. I don't understand why? Anyone has an idea? My zapata options: usecallerid=yes

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I've just received the following mail: ======================================================================= SETUP Q.931 Message - - CALLED PARTY NUMBER - -- NUMBERING PLAN IDENTIFICATION (Octet 3) - --- 0000 (Unknown) Full Octet = 80'h, you have set to 81'h. TYPE OF NUMBER should also be unknown which I have been told you have

Hi All, I have installed a number of Digium G100 devices in many countries like South Korea, Japan, Singapore and Australia. I have just installed two in New Zealand and both sites are having a problem with Caller ID. Incoming calls are dropping the first digit 0 from the caller ID. I was previously using DAHDI and a TE121 device which may have been adding the 0, I'm not too sure about

Hi, ? I'm trying to figure out what the issue is splicing Asterisk between our Telewest PRI and a GDK-186 with a PRI card. ? We're using the Digium TE405P ? Our telco provider is Telewest, and Telco directly into switch is fine. ? When I splice Asterisk in, I can make and receive calls from Asterisk extensions, I can make outbound calls from the GDK, but inbound calls do not seem to pass

I have connected asterisk 1.0.7 with Avaya Definity via E1 with a TE100P Digium Card. Inbound calls are working perfectly and I dont have any problem. But when I try to make an outgoing call with my softphone (xlite) I am getting the following messages. Hungup 'Zap/13-1' Executing Dial("SIP/IZ-bc0a", "Zap/g1/3118") in new stack Called g1/3118 Channel 0/1, span 1 got

Salve, I'm somewhat stuck on how to get DTMF working with my setup and googling didn't yield anything similar. My setup consists of one CAPI-capable board (AVM Fritz!DSL) connected to a BRI (T-ISDN), one HFC-S board running in NT-mode connected to an internal S0 bus with some ISDN devices (DECT stations, TA) and, of course, some ethernet interfaces. ISDN standard used is Euro-ISDN.

Hi, I'm facing a strange problem. My setup is: Alice cellphone <--GSM--><--ISDN--> Asterisk <-- ISDN --><--GSM--> Bob cellphone When Alice calls Asterisk which forwards the incoming call to Bob, sometimes Bob sees Alice's number, sometimes he sees a default CallerID (which happens to match the dialed number and the ANI). For various reasons, Bob really needs to

Hello, Quick Diagram: Telco-PRI -> Asterisk <- Norstar PRI -> Norstar PBX (DMS100) (TE405P) (DMS100) | | V Cisco 7960G (SIP) I'm trying to change the Origination Number on my outgoing PRI, and running into a weird problem. If I make a call from a SIP extension off asterisk using the following context:

Hi list! What exactly is the meaning / function of the pridialplan & prilocaldialplan? I've been trying to find out what the different possibilities for these settings are but couldn't find a clear answer. The possible parameters I could find are are : local,unknown,dynamic,national,international and maybe there are more? Thanks!

Le mar. 15 janv. 2019 à 03:13, Lars Kruse <lists at sumpfralle.de> a écrit : > Hello Julien, > > > Am Mon, 14 Jan 2019 22:15:47 +0100 > schrieb Julien dupont <marcelvierzon at gmail.com>: > > > > ** Test 1 ** > > On VPN_office I use 'tcpdump -npi any icmp and host 192.168.1.3' > > When pinging 192.168.1.1 from client 1, with no success, I

Hi all, using latest asterisk-svn I want to reflect an video call incoming via an PRI EuroISDN channel to another outgoing PRI channel, and I want the the outgoing channel to have the exact same bearer capability < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) < Ext: 1 Trans mode/rate:

Hello! Is it possible to connect Siemens HiPath 4000 to Asterisk? What equipment required on Siemens side? I mean IP not E1. Sorry for asking here. Siemens-related websites use "salesperson language". There is no technical information.

Hi, When we make an outgoing call on ISDN (zaphfc) with overlap dialing we get immidiate hangup after answer. But when we place a full number before dialing everything is ok. Any help appriciated!! Thanks here is info with debug: == Primary D-Channel on span 1 up -- Executing Dial("SIP/200-164c", "zap/g1/|100|tc") in new stack -- Making new call for cr 192 --

When receiving multiple calling numbers via a PRI for a call setup, I cannot find the ability to select between either first or last. Is there a way to do this currently? If not, can anyone help me in getting this to work? Here is the dump of the PRI in intensive debugging. Please note that I want the first calling number, not the last. Any help would be much appreciated. Below the PRI trace