search for: novendor

...idraw0: USB HID v1.11 Device [PPC USB Card] on usb-0000:00:14.0-7/input0 Feb 17 06:12:52 myhost mtp-probe: checking bus 3, device 41: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7" Feb 17 06:12:52 myhost mtp-probe: bus: 3, device: 41 was not an MTP device I tried using the synchronous, novendor and norating settings, to no avail. I also tried a longer pollinterval but that just makes it take longer to reconnect. Here's my ups.conf: [energit] driver = blazer_usb port = auto desc = "Energit MXE II (Centralion Titan Elite)" vendorid = "06da&q...

...0 - a long story for another post... NUT v2.7.4_7 is running as a package on pfSense 2.2.4 (based on FreeBSD 11.2-RELEASE-p10) with the following ups.conf: pollinterval=10 maxretry=10 retrydelay=20 maxstartdelay=120 [ups] driver=blazer_usb port=auto protocol=mustek bus=/dev/usb desc=Sweex PP200 novendor This model has USB productid/vendorid of 5161/0665. The following output from upsc shows the available status from the Sweex, including Load and Charge stats, which do appear to be valid and well-calibrated: battery.charge: 100 battery.voltage: 13.70 battery.voltage.high: 13.00 battery.voltage...

...y the connection lost, and upsmon wont work anymore. I ran blazer in debug mode, like blazer_usb -DD -a eaton. The strange thing is, when i unplug the power, the new device appears in the blazer's output, but sometimes cannot match it. However i tried it with productid, vendorid, serial, bus, novendor etc, no match found, but it's there. I tried to change the pollinterval, no luck. Tried it with the default blazer in squeeze, from sid and the experimental, same thing. I cannot provide logs atm, but any advice should help. thx -------------- next part -------------- An HTML attachment was sc...

Syndome Era Series *upsc output* * *battery.charge: 100 battery.runtime: 1000 <-- not reported by UPS (guesstimate) battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.idleload: 30 driver.parameter.pollinterval: 5 driver.parameter.port: auto driver.parameter.productid: 5161 driver.parameter.runtimecal: 300,100,900,50 <-- guessed from device rating driver.parameter.vendorid: 0...

Hi Artronic art 1000 bl is supported partially by blazer_ser: battery.voltage: 13.40battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.6.3 driver.version.internal: 1.51 input.current.nominal: 4.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 232.9

On Feb 10, 2015, at 5:24 PM, Miroslav Todorov <miro0218 at yahoo.com> wrote: > Hi Artronic art 1000 bl is supported partially by blazer_ser: > When you say "partially supported", what is not supported? Are any of the values incorrect? -- Charles Lepple clepple at gmail

...-13 /etc/ups/ups.conf [infosec] driver = blazer_usb subdriver = cypress # protocol = mustek vendorid = 0665 productid = 5161 port = auto desc = "Infosec X4" offdelay = 60 ondelay = 70 norating novendor linux-2qya:~ # lsusb Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 045e:0797 Microsoft Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 003 Device 001: ID 1d6b:0001...

...ups/driver/blazer_usb -a ups91500 -L Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) I have this settings: upsc ups91500 at localhost battery.charge: 100 battery.runtime: 12000 battery.voltage: 27.50 battery.voltage.high: 27.3 battery.voltage.low: 18.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 43400 driver.parameter.idleload: 5 driver.parameter.offdelay: 600 driver.parameter.ondelay: 5 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/usb/hiddev0 driver.parameter.runtimecal: 600,100,900,50 driver.version: 2.7.1 driv...

Hi all, I have problem with UPS from PowerWalker model VFI 2000 RT LCD over USB (didn't try serial yet). UPS should work via HID driver but ups.status is not rendered properly. Specification of UPS says USB HID compatible. HID driver is the only one which talks with UPS as i try a few from /lib/nut. I use driver usbhid-ups (which communicate with ups), but subdriver resolving is

...lhost] failed - Driver not connected Apr 4 00:44:10 mail blazer_usb[10804]: Got disconnected by another driver: Device or resource busy Apr 4 00:44:10 mail kernel: [83496.177686] usb 4-2: usbfs: process 10804 (blazer_usb) did not claim interface 0 before use ups.conf: maxstartdelay = 70 norating novendor subdriver = cypress [eaton_1] driver = blazer_usb port = "002" desc = "Eaton NV 2000H" vendorid = 0665 productid = 5161 bus = "003" [eaton_2] driver = blazer_usb port = "002" de...

Add a kernel parameter, vendor= which takes a path to a script embedded in the image. If this script is executable, we will then source it during ovirt-early start() after command line processing and before mounting of /config. We also call a post hook at the end of ovirt-early start(). Also include a sample vendor script. Signed-off-by: Ryan Harper <ryanh at us.ibm.com> ---

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.