Displaying 17 results from an estimated 17 matches for "notifyme".
Did you mean:
notifyime
2006 Nov 21
1
MGE Nova 1100 AVR + upssched
...o this, so it could be a stupid thing that I'm missing...
My configurations files are like this:
*ups.conf:*
[ups0]
driver = mge-shut
port = /dev/ttyS0 #It's serial, not USB
*upsmon.conf:*
# NOTIFYCMD <command>
NOTIFYCMD /usr/local/ups/bin/notifyme
# POWERDOWNFLAG - Flag file for forcing UPS shutdown on the master system
POWERDOWNFLAG /etc/killpower
# This file is supposed to be created by NUT when a disconnection
occurs, but I didn't see it. Am I right?
*upssched.conf:*
# CMDSCRIPT <scriptname>
CMDSCRIPT /usr/local/ups/bin/...
2006 Aug 17
2
powercom UPS shoutdown discussion
...for your response.
The point is that I have configured my system to shut down at the event "upsc Inform@localhost ups.status"!="OL", not at "LB". So there will be no /etc/killpower file created. At an ups.status != "OL" event, the following script named "notifyme" is run:
echo `date` >> /root/upsLog
echo " No power, shutting down the system!" >> /root/upsLog
sleep 30
control=`/usr/local/ups/bin/upsc Inform@localhost ups.status`
if [ $control != OL ]
then
/sbin/telinit 0
fi
I tried adding the line: "touch /etc/powerdown&quo...
2015 Sep 21
0
problem with NOTIFYCMD
I have been racking my brains on this and just can't figure it out.
In upsmon.conf I defined NOTIFYCMD as /etc/nut/notifyme.sh
I did CHMOD 755 /etc/nut/notifyme.sh
I put a line in /etc/nut/notifyme.sh to echo a simple message when it is
called and the message never shows on an open terminal whenever I pull the
plug to the UPS.
I do, however get a WALL broadcast message to that open terminal when I
pull the UPS power c...
2006 Aug 16
5
Master privileges unavailable on UPS, no access :(
Hello!
After I type "upsmon", in syslog the following message appears:
Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost]
Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied
Can you tell me where my error is, my configuration files are:
ups.conf:
[Inform]
driver = powercom
port = /dev/ttyS0
desc = "inform guard"
linevoltage = 220
2012 Aug 27
1
nut setup on ubuntu 10.04
using latest stable version, 2.4.3
I've think i've got my configurations mostly working.
I followed the following site.
http://www.blasterspike.it/2011/03/28/how-to-install-nut-on-ubuntu-10-10-maverick-meerkat/
one issue i have is the upsmon.conf setting
NOTIFYCMD /usr/local/ups/bin/notifyme
in web searches it seems like this should be set to
NOTIFYCMD /sbin/upssched
but still not sure and this gets me into upssched.conf
where is CMDSCRIPT sample script upssched-cmd?
any help would be appreciated.
2006 Aug 17
0
(no subject)
...wer falures one exactly 30 sec after the other, my PC will shutdown. Ok, having in mind the possibility for such a thing to happen, I do not find it quite annoying really :). Of course if you do not see some significant potential problem in all that.
And concerning the UPS shutdown,
I remind you my notifyme script:
echo `date` >> /root/upsLog
echo " No power, shutting down the system!" >> /root/upsLog
sleep 30
control=`/usr/local/ups/bin/upsc Inform@localhost ups.status`
if [ $control != OL ]
then
/sbin/telinit 0
fi
I tried adding the line: "touch /etc/powerdown" to...
2006 Aug 17
1
powercom issues
And something else, that previously eluded from my thoughts:my "notifyme" script,i.e the script that is executed at an ups.status="OB" event, is:
echo `date` >> /root/upsLog
echo " No power, shutting down the system!" >> /root/upsLog
sleep 30
control=`/usr/local/ups/bin/upsc Inform@localhost ups.status`
if [ $control != OL ]
then
/u...
2006 Feb 14
3
Master privileges unavailable on UPS
...sers
[monmaster]
password = *
allowfrom = localhost
actions = SET
instcmds = ALL
# Network UPS Tools: example upsmon configuration
RUN_AS_USER nutmon
MONITOR lupin1500AVR@localhost 1 monmaster * master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYCMD /usr/local/ups/bin/notifyme
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC
NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC
NOTIFYFLAG FSD SYSLOG+WALL+EXEC
NOTIFYFLAG COMMOK SYSLOG+WALL+EXEC
NOTIFYFLAG COMMBAD SYSLOG+WALL+EXEC
NOTIFYFLAG...
2006 Aug 08
1
2.0.1 upsmon memory leak
...1]:
connect failed: Connection failure: Connection refused
Using the configuration file of:
MONITOR sm700_0@192.168.1.21 1 monitoruser password slave
MONITOR rm3000_0@192.168.1.22 0 monitoruser password slave
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
# NOTIFYCMD /usr/local/ups/bin/notifyme
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5
Upsmon is:
companyfs1:/var/log# /sbin/upsmon -V
Network UPS Tools upsmon 2.0.1
Rehupping the process
companyfs1:/tmp# ps aux | grep [n]ut
nut 30369 0.0 0.1 172...
2006 Aug 17
1
powercom upstype identify problem
...ST". Now my upsd.users is:
[root]
password = password
allowfrom = localhost
upsmon master
actions = SET
instcmds = ALL
and upsmon.conf is:
RUN_AS_USER root
MONITOR Inform@localhost 1 root password master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h now"
NOTIFYCMD /usr/local/ups/bin/notifyme
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 0
DEADTIME 15
POWERDOWNFLAG /etc/killpower
NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY
I had to run as user root, because otherwise the command "telinit 0" from the notifyme script does not have the permission to e...
2017 Jun 09
2
Apple Mac slave
On Thu, 8 Jun 2017, Robbie van der Walle wrote:
> After the first test and the NAS is restarted I had to change the
> setting battery.charge.low again to 80?
Does the NAS DSM reset battery.charge.low to 10 or is it internal to the
UPS? You will have to experiment by disconnecting the UPS control lead
from the NAS and connecting it (if possible) to the Mac. After setting to
80 and a
2015 Sep 22
2
NOTIFYCMD shell script problem driving me NUTS
Either I am missing something or I am really STUPID.
1. I have added a user, named nutmon, to the nut group.
2. In upsmon.conf I have set RUN_AS_USER nutmon .
3. I have NOTIFYCMD /etc/nut/notifyme.sh and it is set as 755, so should be
executable by everyone.
4. I have the NOTIFYFLAG set as SYSLOG+WALL+EXEC, so the shell should
execute.
This is the shell script :
#!/bin/bash
#
# NUT NOTIFYCMD script
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin
notify-send --expire-tim...
2013 Apr 15
0
mounting engine in namespace
I am testing an engine which normally is mounted at /
NotifyMe::Application.routes.draw do
> mount_opro_oauth :controllers => {:oauth_client_apps =>
> ''oauth/client_apps''}
I am trying to mount it inside my existing backoffice namespace, is it
possible or not advisable
namespace :backoffice do
> match ''...
2006 Jul 15
2
Shutdown Problem
...users contains
[username]
password = password
allowfrom = localhost
upsmon master
/etc/ups/upsmon.conf
# RUN_AS_USER nutmon
MONITOR Gamatronic_SmartCompact@localhost 1 username password master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h now"
# NOTIFYCMD /usr/local/ups/bin/notifyme
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
# NOTIFYMSG ONLINE "UPS %s is getting line power"
# NOTIFYMSG ONBATT "Someone pulled the plug on %s"
# NOTIFYFLAG ONLINE SYSLOG
# NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
RBWARNTIME 43200
NOCOMMWARNTIME 30...
2011 Apr 28
1
Problem with blazer_ser/megatec when upgrading to 2.6.0 from 2.4
...v
LISTEN 127.0.0.1 3493
cat upsd.users | grep "#" -v
[monuser]
password = #######
cat upsmon.conf | grep "#" -v
MONITOR munja at localhost 1 monuser ###### slave
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYCMD /usr/local/ups/bin/notifyme
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5
/lib64/nut/blazer_ser -DDDDD -a munja -i 10
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.0)
0.000000 send_to_all: SETINFO driver.parameter.por...
2009 Dec 28
4
Megatec driver floods logs #2 & mail notifications
Hi there!
I'm a n00b NUT user trying to get it running on RHEL5 and actually do
something useful for me. Few questions:
1) I want it to notify me by email on power loss and power back events.
I can't find any sample scripts for this purpose... Where shall I look
for them?
2) So far, I've backported the package from Fedora and got my Ablerex
running (previously used with Upsilon /
2017 Jan 09
2
NUT Client shuts down when performing runtime calibration on APC UPS
...this is only called for NOTIFY events that have EXEC set with
# NOTIFYFLAG. See NOTIFYFLAG below for more details.
#
# Making this some sort of shell script might not be a bad idea. For more
# information and ideas, see pager.txt in the docs directory.
#
# Example:
# NOTIFYCMD /usr/local/ups/bin/notifyme
# --------------------------------------------------------------------------
# POLLFREQ <n>
#
# Polling frequency for normal activities, measured in seconds.
#
# Adjust this to keep upsmon from flooding your network, but don't make
# it too high or it may miss certain short-lived power e...