search for: none2

...for protocol version 2. By default, sshd will not allow these to be used; an admin will have to explicitly allow them in the Ciphers and MACs section of sshd_config. Additionally, the client will not use these unless explicitly instructed to by the user. The actual name of the cipher is 'none2', to distinguish it from the 'none' cipher available for ssh v1. The name of the mac is hmac-none. The reasoning for having these is that there are times when a user might not want their session encrypted. For instance, when using ssh over an already secured interface (IPsec), thr...

...aded a box from 6.2 to 6.3-RELEASE. Afterwards the box does not recognize its ST Lab I-160 serial card with Netmos 9845 Chipset. It worked flawlessly on 6.2 with puc(4) driver. >From dmesg: pci1: <simple comms, UART> at device 8.0 (no driver attached) ~# pciconf -l -v | grep -B 4 UART none2@pci1:8:0: class=0x070002 card=0x00041000 chip=0x98459710 rev=0x01 hdr=0x00 vendor = 'MosChip Semiconductors (Was: Netmos Technology)' device = 'Nm9845 Parallel/Serial Port Adapter' class = simple comms subclass = UART Kernel-config includes device...

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet re0@pci0:2:4:0: class=0x020000 card=0x10ec16f3 ch...

I sent an email out to freebsd-net without a response, soo this is my last attempt at getting any assistance here. I have a QLE3142-CU-CK (rebranded NetXen NX3-20GCU w/ NX3031 chipset) with no driver support in *BSD from anything I saw. I came across solaris's ntxn driver which seems to work appropriately but I have no use for solaris as a host o/s. Naturally I'll attempt at trying to get

...00 11.50 13.25 13.00 $ctr.8w [1] 13.25 11.50 12.00 13.50 11.50 > walk <- unlist(zelazo) > walk active1 active2 active3 active4 active5 active6 passive1 passive2 9.00 9.50 9.75 10.00 13.00 9.50 11.00 10.00 passive3 passive4 passive5 passive6 none1 none2 none3 none4 10.00 11.75 10.50 15.00 11.50 12.00 9.00 11.50 none5 none6 ctr.8w1 ctr.8w2 ctr.8w3 ctr.8w4 ctr.8w5 13.25 13.00 13.25 11.50 12.00 13.50 11.50 > group <- factor(rep(1:4,c(6,6,6,5)), labels=names(zelazo)) > group...

...; option. Here's the error I get when I run 'ssh -c none' to my office machine: No valid ciphers for protocol version 2 given, using defaults. The /etc/ssh/sshd_config file on my office machine does contain the following line: Ciphers aes128-cbc,blowfish-cbc,3des-cbc,cast128-cbc,none2 However, the ssh 3.8.1p1 client doesn't seem to recognize the cipher 'none2'. This is confirmed by looking at the openssh source in the file cipher.c. There is no cipher called "none2" in 3.8.1p1 source while it exists in 3.6.1p2 source. So I guess there are two problems:...

...-combining range (0xa0000,0x20000) was already clear (==) NV(0): Write-combining range (0xc0000,0x40000) (WW) NV(0): Bad V_BIOS checksum (II) NV(0): Primary V_BIOS segment is: 0xc000 (==) NV(0): Write-combining range (0x0,0x1000) was already clear pciconf reports the following: none2@pci1:0:0: class=0x030000 card=0x040910b0 chip=0x018110de rev=0xa2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'GeForce4 MX 440SE with AGP 8X [NV18]' class = display subclass = VGA No XFree86Config.new is written out. Any ideas or suggest...

...9; class = multimedia subclass = audio vr0@pci0:18:0: class=0x020000 card=0x738c1462 chip=0x30651106 rev=0x74 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6102 Rhine II PCI Fast Ethernet Controller' class = network subclass = ethernet none2@pci1:0:0: class=0x030000 card=0x73891462 chip=0x8d045333 rev=0x00 hdr=0x00 vendor = 'S3 Graphics Co., Ltd.' device = '86C420 ProSavage DDR' class = display subclass = VGA -- Chris Hastie

...= 'nForce2 Memory Controller 1' class = memory subclass = RAM none1@pci0:0:2: class=0x050000 card=0x10001695 chip=0x01ee10de rev=0xc1 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce2 Memory Controller 4' class = memory subclass = RAM none2@pci0:0:3: class=0x050000 card=0x10001695 chip=0x01ed10de rev=0xc1 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'nForce2 Memory Controller 3' class = memory subclass = RAM none3@pci0:0:4: class=0x050000 card=0x10001695 chip=0x01ec10de rev=0xc1 hdr=0x00 ven...

...idge subclass = PCI-CardBus fwohci0@pci0:8:6:1: class=0x0c0010 card=0x30a5103c chip=0x803a104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = '??? OHCI Compliant IEEE 1394 Host controller' class = serial bus subclass = FireWire none2@pci0:8:6:2: class=0x018000 card=0x30a5103c chip=0x803b104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'PCIxx12 Integrated Flash Media Controller' class = mass storage none3@pci0:8:6:3: class=0x080500 card=0x30a5103c chip=0x803c...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

hi folks: xorg caused my macbook 10,1 reboot immediately while startup X with latested nvidia-driver and event not to generate Xorg.0.log file attached my verbose message. thanks for any ideas --wsk -------------- next part -------------- Sep 20 15:40:31 rmbp syslogd: kernel boot file is /boot/kernel/kernel Sep 20 15:40:31 rmbp kernel: 2 Sep 20 15:40:31 rmbp kernel: MADT: Interrupt override: