search for: nbx

Has there been any luck getting the 3Com NBX series phones to work with Asterisk? Thanks! -Andrew

Hi, I've looked pretty wide on Google for this so I don't think it's been asked before. Has anyone had experience integrating Asterisk with a 3COM NBX system? The only way that I can see that looks possible is via the 3Com NBX ConneXtions H.323 product and then one of the H.323 Asterisk channels. Has anyone done this? Any pointers as to what to avoid or whether to even attempt it? I would much prefer a SIP solution to the NBX but this does not...

How hard is it to integrate * into an existing 3com NBX setup? -Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/bf01e3d9/attachment.htm

I sent this once already but it didnt show up in my mailbox so I am not sure if ever made it to the list. If it did, my apologies. I have an * system and an nbx. My plan is to use several grandstream 286s and plug the the phone cords into the NBX's analog FXO card. It works fine but after I make a call, the port stays open on the NBX and I cannot make another call for around five minutes or I have to manually reset the port on the NBX. I assume the...

Hello, everyone, I am currently trying to get the asterisk server to talk with a 3COM NBX with T1 connection. My asterisk server has a T100p, TDM20B, a couple of sip phones. Now the sip phones are calling 3COM NBX phones fine, however, the analog phone has problem when dialing the NBX phones. The connection is established and the NBX auto-attendant picks up the call however the NBX end...

...recisely the coefficients of the predictors. Any help on how to be as precise as possible on the betas would be nice. Here is the code I wrote where all predictors are continuous with variance =1 and correlations between predictors vary for each condition of Y. _________ library(MASS) N<-1000 nbX<-3 propSick<-0.2 corrSick<-.8 corrHealthy<-.9 sigma0<-matrix(corrHealthy,nbX,nbX) diag(sigma0)<-1 sigma1<-matrix(corrSick,nbX,nbX) diag(sigma1)<-1 dataHealthy<-mvrnorm(N*(1-propSick),c(0,0,0),sigma0) dataSick<-mvrnorm(N*propSick,c(1,1,1),sigma1) dataS<-as.data.fra...

We've been talking about moving from our NBX100 to an asterisk solution for some time now. Well, to make a long story short, the call processor on our NBX has went south. We are now forced to purchase a new call processor >$500 or move our solution to asterisk. (Which is up and running and have been tested with Grandstream Adapters.)...

Does anybody know if the 3com NBX 100 phones will work with Asterisk? The phones require a boot image to be sent either through layer2 or layer3 before they will function properly after being powered on each time. Thanks.

...ntioned a downloader service. >From the posts and articles I have read, the NCP is acting like a bootp and tftp server which uploads the configuration to the phone?? Am I close? if so, where does one get the SIP image for he 3102 and 2102 phones? I had 8 donated, but they are useless without a NBX or NCP ? Any specs on how to configure linux to act like one? Thanks in advance

My new company is going to enter a bid competing with 3Com and Siemens solutions from others. Voice service is a PRI T-1 with a block of 100 DID numbers, a second T1 that will carry Integrated voice/data, 12 voice/768K for redundency. I asked this a week or two ago, now I have more details. Best/$ channel banks that work with Asterisk and Best deal on phones... 16 business, 34 basic IP

...BSERVER.COM:2083". I thought it was just caused by my firewall so I open the ports with this way: 1. setup; 2. I chose the 'firewall menu'; 3. Allow incoming: ssh, www(http), secure www(https), telnet, samba, nfs4, ftp, mail, pop3:tcp infowave:tcp radsec:tcp gnunet:tcp eli:tcp sep:tcp nbx-ser:tcp nbx-dir:tcp . But opening the tcp ports does not make any change at all. Please tell me where my mistake. Thank you very much.

i am just curious how many * systems are in the real world with more than one user. do you run a certain version? you dont update CVS do you? any admins running a system of over twenty? over fifty? over one-hundred? i deal with 3com and nec systems all day (i am cerified in the 3com nbx advanced network telephony, elite voice mail, CCNA, A+, nec ipk, and soon to be "asterisk school of Northern Virginia (once its a mainstay and reliable). they are five nines but totally proprietary and extremely expensive. i think the nec runs dos and i know the 3com nbx run vxworks. the...

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an asterisk box pro...

...pointers in answer to my questions about SME VoiP/* in the UK; i'll update you on my progress as and when this ends up as an implemented * solution (and i totally take on board the recommendation to look at 2nd hand CCME -- i should have said at the start that i've just co-ordinated an NBX install for a much larger project and that part of my current investigations is simply to see at what point * is more appropriate (in terms of cost, effort, reliability, flexibility) than NBX/CCME et al. Not intending to start a flamewar on the subject at this point -- there are MANY variables...

Greetings all, I am interested in setting up a lab in my house to run my home phone system. Can some one point me in the right direction hardware wise for achieving this goal? I happen to have a few 3com NBX phones, and have been told that they are SIP compliant but am not exactly sure if I believe 3com...I would be interested to know if anyone has these things working on *. In any event I obviously only have a single pots line to the house so I need to build the system around that limitation,...

...ibility list anywhere? I know Asterisk is supposed to be compatible with IP phones that support SIP, h.232, and IAX, but a list of phone known to be supported would be a nice addition to the documentation. I need a buisiness phone, and the Cisco is _EXPENSIVE_ I like the 3com 1102, but it is NBX phone, and I can find no documentation of this phone working with Asterisk, even though it is listed as a SIP phone, and is supposed to support h.232. Anyone got this one working? Michael Rowley

Good Morning, I'm thinking about buying the asterisk six-months online course, Have somebody here that bought that course? What is your opinion? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110606/3008703d/attachment.htm>

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are

Does Asterisk work with Lucent or any other PBX phone systems????

Another trivial question: Is there a "place" where all the parameters are documented ? In example (my example!) I would like to know the meaning of a lot of parameter that can be used in sip.conf, A lot of these keywords are intuitive keywords (i.e. NAT=YES/NO;PORT=5060; context=xxxxx) but other are not (at least for me) i.e.: type = peer, friend insecure=very host=dynamic and so on.