Another trivial question: Is there a "place" where all the parameters are documented ? In example (my example!) I would like to know the meaning of a lot of parameter that can be used in sip.conf, A lot of these keywords are intuitive keywords (i.e. NAT=YES/NO;PORT=5060; context=xxxxx) but other are not (at least for me) i.e.: type = peer, friend insecure=very host=dynamic and so on. At last, my need is: Accept a non-registerd sip-strem from a well known ip address (and only from that ip address....) I tried to add a [testsip] ;username=testsip type=friend ;secret=testsip qualify=no port=5060 nat=no host=x.y.z.w dtmfmode=rfc2833 context=from-internal canreinvite=no callerid="test sip " <testsip> that would work if the sip would be registered. But the SIP client is not able to register. I solved using the context = from-sip-external ; Send unknown SIP callers to this context and it works, but I have no more the control about who is sending me SIP stream (anybody now can use my asterisk box...) any help will be greatly appreciated Andrea Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla. Visitate il sito http://www.frameweb.it
www.voip-info.org> Another trivial question: > > Is there a "place" where all the parameters are documented ? > In example (my example!) I would like to know the meaning of a lot of > parameter that can be used in sip.conf, > > A lot of these keywords are intuitive keywords (i.e. NAT=YES/NO;PORT=5060; > context=xxxxx) but other are not (at least for me) > i.e.: > > type = peer, friend > insecure=very > host=dynamic > > and so on. > > At last, my need is: > > Accept a non-registerd sip-strem from a well known ip address (and only > from that ip address....) > > I tried to add a > > [testsip] > ;username=testsip > type=friend > ;secret=testsip > qualify=no > port=5060 > nat=no > host=x.y.z.w > dtmfmode=rfc2833 > context=from-internal > canreinvite=no > callerid="test sip " <testsip> > > that would work if the sip would be registered. But the SIP client is not > able to register. > > I solved using the > context = from-sip-external ; Send unknown SIP callers to this context > > and it works, but I have no more the control about who is sending me SIP > stream (anybody now can use my asterisk box...) > > any help will be greatly appreciated > > Andrea
> Is there a "place" where all the parameters are documented ? > In example (my example!) I would like to know the meaning of a lot of > parameter that can be used in sip.conf,http://www.voip-info.org/wiki-Asterisk+config+sip.conf How did I found this ? http://www.google.ca/search?hl=en&q=site%3Avoip-info.org+sip.conf&btnG=Google+Search&meta Remember : google is your friend
Really strange answer. I am non used to search on playboy.com.
Anyway, if you try to search
insecure=very
on www.voip-info.org, you find 742 links , a bit more for me. (I just want
to know what it means)
Moreovere, the first 20 links are non accessible at all
http://www.voip-info.org/tiki-pagehistory.php?page=Asterisk+sip+insecure&diff=6
they speak about tiki-pagehistory.php, which appears not to exist.
no other comments about this.
************************************************************
I know about one project , "asterisk documentation project"
http://www.asteriskdocs.org
in its home page, the first line is
Great software needs great documentation.
I really hope this project will be implemented, without documentation
evrything is too hard
Andrea
"Steve Totaro"
<asterisk@totarot
echnologies.com> To
Sent by: "Asterisk Users Mailing List -
asterisk-users-bo Non-Commercial Discussion"
unces@lists.digiu <asterisk-users@lists.digium.com>
m.com cc
Subject
12/10/2005 14.53 Re: [Asterisk-Users] parameters
documentation
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users@l
ists.digium.com>
www.voip-info.org
> Another trivial question:
>
> Is there a "place" where all the parameters are documented ?
> In example (my example!) I would like to know the meaning of a lot of
> parameter that can be used in sip.conf,
>
> A lot of these keywords are intuitive keywords (i.e.
NAT=YES/NO;PORT=5060;> context=xxxxx) but other are not (at least for me)
> i.e.:
>
> type = peer, friend
> insecure=very
> host=dynamic
>
> and so on.
>
> At last, my need is:
>
> Accept a non-registerd sip-strem from a well known ip address (and only
> from that ip address....)
>
> I tried to add a
>
> [testsip]
> ;username=testsip
> type=friend
> ;secret=testsip
> qualify=no
> port=5060
> nat=no
> host=x.y.z.w
> dtmfmode=rfc2833
> context=from-internal
> canreinvite=no
> callerid="test sip " <testsip>
>
> that would work if the sip would be registered. But the SIP client is not
> able to register.
>
> I solved using the
> context = from-sip-external ; Send unknown SIP callers to this context
>
> and it works, but I have no more the control about who is sending me SIP
> stream (anybody now can use my asterisk box...)
>
> any help will be greatly appreciated
>
> Andrea
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
asterisk@frameweb.it wrote:>Anyway, if you try to search >insecure=very >on www.voip-info.org, you find 742 links , a bit more for me. (I just want >to know what it means)I think the search is broken there. Just go in under Asterisk and look for where the configuration files are documented. Doug -- Doug Meredith (doug.meredith@systemguard.com) SystemGuard - Oracle remote support 877-974-8273 (87-SYSGUARD) 506-854-7997 www.systemguard.com
I come from a NBX100
No documentation available.
1 day it starts saying: "syslog full" and voicemail stop working
No one was able to tell me what was the meaning of that alert
.
3COM NBX anyway is a good product, but the price is too high, especially 4
years ago, and especially the price of the telephone is very high.
Andrea
"asterisk"
<asterisk@totarot
echnologies.com> To
Sent by: "Asterisk Users Mailing List -
asterisk-users-bo Non-Commercial Discussion"
unces@lists.digiu <asterisk-users@lists.digium.com>
m.com cc
Subject
13/10/2005 16.13 Re: [Asterisk-Users] parameters
documentation
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users@l
ists.digium.com>
"> I really hope this project will be implemented, without documentation
evrything is too hard"
Not for the thousands of people that have figured it out.
3Com NBX might be more your speed and plenty of documentation.
> Really strange answer. I am non used to search on playboy.com.
>
> Anyway, if you try to search
> insecure=very
> on www.voip-info.org, you find 742 links , a bit more for me. (I just
want> to know what it means)
>
> Moreovere, the first 20 links are non accessible at all
>
>
http://www.voip-info.org/tiki-pagehistory.php?page=Asterisk+sip+insecure&diff=6
>
> they speak about tiki-pagehistory.php, which appears not to exist.
>
> no other comments about this.
> ************************************************************
>
> I know about one project , "asterisk documentation project"
>
> http://www.asteriskdocs.org
>
> in its home page, the first line is
>
>
>
>
>
> Great software needs great documentation.
>
>
>
>
> I really hope this project will be implemented, without documentation
> evrything is too hard
>
> Andrea
>
>
>
>
> "Steve Totaro"
> <asterisk@totarot
> echnologies.com>
To> Sent by: "Asterisk Users Mailing List -
> asterisk-users-bo Non-Commercial Discussion"
> unces@lists.digiu
<asterisk-users@lists.digium.com>
> m.com
cc>
>
Subject> 12/10/2005 14.53 Re: [Asterisk-Users] parameters
> documentation
>
> Please respond to
> Asterisk Users
> Mailing List -
> Non-Commercial
> Discussion
> <asterisk-users@l
> ists.digium.com>
>
>
>
>
>
>
>
> www.voip-info.org
>
> > Another trivial question:
> >
> > Is there a "place" where all the parameters are documented ?
> > In example (my example!) I would like to know the meaning of a lot of
> > parameter that can be used in sip.conf,
> >
> > A lot of these keywords are intuitive keywords (i.e.
> NAT=YES/NO;PORT=5060;
> > context=xxxxx) but other are not (at least for me)
> > i.e.:
> >
> > type = peer, friend
> > insecure=very
> > host=dynamic
> >
> > and so on.
> >
> > At last, my need is:
> >
> > Accept a non-registerd sip-strem from a well known ip address (and
only
> > from that ip address....)
> >
> > I tried to add a
> >
> > [testsip]
> > ;username=testsip
> > type=friend
> > ;secret=testsip
> > qualify=no
> > port=5060
> > nat=no
> > host=x.y.z.w
> > dtmfmode=rfc2833
> > context=from-internal
> > canreinvite=no
> > callerid="test sip " <testsip>
> >
> > that would work if the sip would be registered. But the SIP client is
not> > able to register.
> >
> > I solved using the
> > context = from-sip-external ; Send unknown SIP callers to this context
> >
> > and it works, but I have no more the control about who is sending me
SIP> > stream (anybody now can use my asterisk box...)
> >
> > any help will be greatly appreciated
> >
> > Andrea
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.14/128 - Release Date:
10/10/2005>
>
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Thank you very much for your answer.
I searched the wiki using your criteria, and I found
http://www.voip-info.org/wiki/index.php?page=Asterisk+config+sip.conf
which seems to be the answer to my question
thank you again
Andrea
Doug Meredith
<doug.meredith@sk
yridge.com> To
Sent by: asterisk-users@lists.digium.com
asterisk-users-bo cc
unces@lists.digiu
m.com Subject
[Asterisk-Users] Re: parameters
documentation
12/10/2005 11.31
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users@l
ists.digium.com>
asterisk@frameweb.it wrote:
>Anyway, if you try to search
>insecure=very
>on www.voip-info.org, you find 742 links , a bit more for me. (I just want
>to know what it means)
I think the search is broken there. Just go in under Asterisk and
look for where the configuration files are documented.
Doug
--
Doug Meredith (doug.meredith@systemguard.com)
SystemGuard - Oracle remote support
877-974-8273 (87-SYSGUARD)
506-854-7997
www.systemguard.com
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
trixter http://www.0xdecafbad.com
2005-Oct-12 16:01 UTC
[Asterisk-Users] parameters documentation
On Wed, 2005-10-12 at 09:41 -0400, Time Bandit wrote:> > Is there a "place" where all the parameters are documented ? > > In example (my example!) I would like to know the meaning of a lot of > > parameter that can be used in sip.conf, > > http://www.voip-info.org/wiki-Asterisk+config+sip.conf > > How did I found this ? > > http://www.google.ca/search?hl=en&q=site%3Avoip-info.org+sip.conf&btnG=Google+Search&meta> > Remember : google is your friendto elaborate slightly ... if you type into google site:voip-info.org asterisk <type> <item> where type is cmd or config and item is either the config file name or the command you should be able to get there. Alternatively you can just straight there by entering the url: http://www.voip-info.org/wiki-Asterisk+<TYPE>+<ITEM> Google is handy if you dont know the name of the command in question because you can just omit <item> and it will show all the commands available :) -- Trixter http://www.0xdecafbad.com Bret McDanel UK +44 870 340 4605 Germany +49 801 777 555 3402 US +1 360 207 0479 or +1 516 687 5200 FreeWorldDialup: 635378 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20051012/22653696/attachment.pgp
"> I really hope this project will be implemented, without documentation evrything is too hard" Not for the thousands of people that have figured it out. 3Com NBX might be more your speed and plenty of documentation.> Really strange answer. I am non used to search on playboy.com. > > Anyway, if you try to search > insecure=very > on www.voip-info.org, you find 742 links , a bit more for me. (I just want > to know what it means) > > Moreovere, the first 20 links are non accessible at all > >http://www.voip-info.org/tiki-pagehistory.php?page=Asterisk+sip+insecure&diff=6> > they speak about tiki-pagehistory.php, which appears not to exist. > > no other comments about this. > ************************************************************ > > I know about one project , "asterisk documentation project" > > http://www.asteriskdocs.org > > in its home page, the first line is > > > > > > Great software needs great documentation. > > > > > I really hope this project will be implemented, without documentation > evrything is too hard > > Andrea > > > > > "Steve Totaro" > <asterisk@totarot > echnologies.com> To > Sent by: "Asterisk Users Mailing List - > asterisk-users-bo Non-Commercial Discussion" > unces@lists.digiu <asterisk-users@lists.digium.com> > m.com cc > > Subject > 12/10/2005 14.53 Re: [Asterisk-Users] parameters > documentation > > Please respond to > Asterisk Users > Mailing List - > Non-Commercial > Discussion > <asterisk-users@l > ists.digium.com> > > > > > > > > www.voip-info.org > > > Another trivial question: > > > > Is there a "place" where all the parameters are documented ? > > In example (my example!) I would like to know the meaning of a lot of > > parameter that can be used in sip.conf, > > > > A lot of these keywords are intuitive keywords (i.e. > NAT=YES/NO;PORT=5060; > > context=xxxxx) but other are not (at least for me) > > i.e.: > > > > type = peer, friend > > insecure=very > > host=dynamic > > > > and so on. > > > > At last, my need is: > > > > Accept a non-registerd sip-strem from a well known ip address (and only > > from that ip address....) > > > > I tried to add a > > > > [testsip] > > ;username=testsip > > type=friend > > ;secret=testsip > > qualify=no > > port=5060 > > nat=no > > host=x.y.z.w > > dtmfmode=rfc2833 > > context=from-internal > > canreinvite=no > > callerid="test sip " <testsip> > > > > that would work if the sip would be registered. But the SIP client isnot> > able to register. > > > > I solved using the > > context = from-sip-external ; Send unknown SIP callers to this context > > > > and it works, but I have no more the control about who is sending me SIP > > stream (anybody now can use my asterisk box...) > > > > any help will be greatly appreciated > > > > Andrea > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.344 / Virus Database: 267.11.14/128 - Release Date:10/10/2005> >