Displaying 20 results from an estimated 55 matches for "multitechs".
Did you mean:
multitech
2005 Mar 14
0
Multitech MVP130 as FXO with asterisk
...ing fine with several Grandstream phones as
well as linphone on my PC. Now the last step is configuring the
multitech MVP 130s that I have to send outbound calls to the POTS lines
attached to the MVP130s.
I'm having issues with the outbound and inbound telephone book entries I
believe. The multitechs work fine when configured to talk to each other
at remote locations, but getting them to accept a call from asterisk
hasn't worked well.
I've configured them in sip.conf and made a simple entry in
extensions.conf to send an outbound call to the first MVP130 but I
always get 404 on it....
2004 Sep 08
1
successful echo cancellation!!! (multitech)
We recently had a customer install that went horribly wrong. Serious
echo (pots lines into a cac cb) that, although * did a good job
getting rid of alot of it, could not get rid of it all. We tried
everything, every canceller, gain setting, etc... combination
possible to no avail.
Both the vegastream and mediatrix boxes also could not get rid of all
of the echo.
So, on an off chance, we
2005 Feb 19
1
Asterisk with Multitech H323 Gateway MVP400
Hi List,
I have a Multitech H323 Gateway MVP400 box with 1
phone on port FXO 1.
I have Asterisk ruuning in Fedora Core 3. Both are in
the same network.
But I can't figure what I have to do in Asterisk to
make that box work. What files I have to configure?
Can anyone help me? I will really appreaciate youu
help.
Luis.
_________________________________________________________
Do You Yahoo!?
2009 Feb 26
6
HylaFax and Com Ports
I need to setup HylaFax which leads to my first question, anyone
got an opinion on whether or not to use HylaFax or HylaFax+?
Also, I have to setup a Digi serial port server for an external fax modem.
Any reco''s on a robust unit that won''t need to be reset often?
Thanks!
jlc
2003 Nov 04
1
multitech.
Hi All,
I'm new to asterisk, can I use asterisk with a Multitech mvp 210?
Thanks,
Steve
2013 Nov 24
0
MultiTech MT5634ZBA usb modems
Everyone,
I have a centos 5.10 machine set up to be a fax server using hylafax+
with three multitech MT5634ZBA modems. I am still in the testing phase
of using this system for production, and during my tests I have detected
a problem I have not been able to solve except for unplugging the modem
from the usb port and plugging it back into the usb port.
In the middle of a fax production of
2003 Nov 05
6
Skinny (SCCP) help
I have a cisco 7910 phone, I'm trying to get it to connect to asterisk,
But it seems like it needs either a SEPDefault.cnf file or a
SEPMACADDR.cnf file to
Continue, I created empty ones but it's still sitting there saying
"opening"
Does anyone have examples of the SEPDefault.cnf file?
Kevin,
2007 Jan 15
3
Practical limit on dial prefixes for a route
Colleagues,
We're in the process of standardizing on Sprint PCS and Cingular phones on a
national basis (~ 50 properties, 1000's of lines). I manage an Asterisk
install at one location.
I've been looking at the Multitech CellFinder CDMA for Sprint as a dial
backup solution. Basically, it's a CDMA to POTS gateway, tied to a PCS
account. We would see it as a trunk line and I
2005 May 05
11
FXO ATA?
Is the Sipura 3000 the only way to interface a remote pstn line and connect
incoming calls to Asterisk? I have a location connected by network that has
a phone line, when the room is occupied I want the line ti ring there as
normal, but when the employee is travelling I want the line to be conencted
to a ATA that then feeds it as an incoming pstn line to the pbx located at
my office so it can
2007 Jan 25
0
Planning 48 Station Install, Need advice on several topics
I'm planning a new * system which will utilize 48 stations (Polycom
Soundpoint 501s mostly) and a dual span PRI card and I have some questions.
The system will host MeetMe conferences of 10-15 users on a regular basis
and see fairly high usage as it is going into a medical setting.
1. I haven't built a system this big before, will a processor such as the
Intel Pentium D 830 3.0GHz / 2MB
2006 Dec 21
2
Connect many fax lines?
We have an application for Asterisk that will require connecting 144 fax
ports into the system. Faxes will route externally over a PRI. The 144
ports are for local fax machines within the building. Not all will be
faxing simultaneously. We just need to be able to provide ports in the
building to plug in lots of fax machines.
The plan is to run an Asterisk server for about 100 phones and these
2009 Feb 16
4
Faxing with asterisk
Hi All,
I need to setup asterisk to receive fax.
I'm try Spandsp (opensource) and Attrafax (commercial) both on
asterisk 1.4.23) but the results are disappointing.
with spandsp many times the fax arrives cut.
with Attrafax i have some problem.
Anyone have any idea or solution (Opensource or commercial) to suggest me ?
Best Regards
2006 May 15
1
Please..... need some help
Sorry if I post in this forum, this may be not the right one, but I hope to find in here some experts which could help me out.
I have in one location 8 extensions from a Panasonic PBX ?KX-TD1232? connected to FXO Ports on an MultiVoIP Gateway from Multitech.
On the other location I have 8 SP5100 IP-Phones from Micronet as remote extensions.
Between the locations I have a VPN.
2004 Aug 27
6
FXOs
Hi All,
I'd really like to see a show of hands with regard to people's
experience with FXO interfaces. I own a few X100p cards and have had
nothing but problems with them.
I also took part in Sipura's beta program, for the SPA-3000. While it
can be an improvement over the X100p, it presently has echo problems
that make it unusable. Sipura has not acknowledged the problem ( at
least
2008 Nov 03
1
TI USB 3410-5052 for CentOS 4.7
Hi,
I am trying to build the driver for the TI USB 3410/5052 family of devices.
Specifically, I am trying to hook up a MultiTech GSM modem.
I have the source for the driver which came with the modem. However, I
beating my head against the wall trying to get around the usb-serial.h not
found error.
I have found references saying usb-serial.h has been moved. Even though
I have pulled
2003 Sep 15
4
ISDN BRI active adapters with NT mode - any alternatives ?
Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking
for a CAPI compatible active BRI adapter capable of NT mode. I have
found that the 'Eicon Diva Server 4BRI' fulfills theses requirements.
However, at EUR 1387 for four BRI interfaces, it does not come cheap.
Are there other users of similar hardware that can point me to
alternatives ?
2007 Feb 07
1
Large number of prefixes in a route to a trunk
We're beginning to test MultiTech's CallFinder CDMA Units, one for Sprint
PCS and one for Alltel. They sell both. Our intent is to use them as a
backup line for our main office (which has a PRI) and a backup/911 line for
our remote offices which are all connected via * over a VPN with no local
trunks at any of them.
In the interest of maximizing use of the lines, I'm putting
2004 Dec 31
3
FXO to IAX on ethernet. or FXO to SIP on Ethernet
Now I have searched around and not seen anything to do this.
I want to in remote locations were we need to have single or 2 PSTN
lines for in dial as little hardware as possible and as stable as
possible so that they will operate without user intervention.
What I want to do is be able to take a single PSTN line in and go out
through adsl for the Inet link.
These would be in VERY remote
2003 Dec 30
3
A Head Check
Hello,
I have been retained by a Building Management Company to install a
combined Voice/Data solution for a Tennated Office Space. This space will
rent offices, with telephone and internet service to inviduals or small
groups of individuals. As fate would have it, the service will be
provided in a building where we have a major Pop, with a DS-3 worth of
ISDN PRI circuits, 345 megs of
2006 Dec 01
2
Recommendation for FXO
Ok,
I am back from my thanksgiving holiday, and I find there was a big
snow storm here in Seattle. Apparently during the storm there where
multiple brown out/black outs.
I have struggled since day one to get a high quality PSTN gateway
configured with my very long loop and Mac based asterisk.
I originally tried the HT-488, which had multiple issues, and was
unacceptable. I then purchased