Displaying 20 results from an estimated 28 matches for "misdn_dsp".
2006 Jun 02
2
BN8S0 Installation problem - 0 devices registrered
...IO
after the kernel recompilation and the reboot i build and install
mISDNuser with make and make install.
The card is recognized by the system, this is the output of lspci:
00:0d.0 ISDN controller: Cologne Chip Designs GmbH ISDN network
Controller [HFC-8S] (rev 01)
and i can load hfcmulti and mISDN_dsp without problems...
all channels are configured in TE mode, i use this modprobe:
/sbin/modprobe hfcmulti layermask=0xf,0xf,0xf,0xf,0xf,0xf,0xf,0xf
protocol=0x2,0x2,0x2,0x2,0x2,0x2,0x2,0x2 type=0x08
/sbin/modprobe mISDN_dsp
and this is the output of dmesg:
Modular ISDN Stack core $Revision: 1.34...
2005 Feb 11
8
chan_capi and asterisk
...== Unregistered channel type 'CAPI'
Feb 11 13:50:36 WARNING[2535]: loader.c:391 load_modules:
Loading module chan_capi.so failed!
my lsmod shows:
Module Size Used by
mISDN_capi 85312 0
kernelcapi 45088 1 mISDN_capi
hfcpci 28716 0
mISDN_dsp 197248 0
l3udss1 32008 0
mISDN_l2 38272 0
mISDN_l1 10632 0
mISDN_core 77732 6
mISDN_capi,hfcpci,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1
md5 4352 1
ipv6 235840 24
parport_pc 25024...
2006 Jun 01
0
Problems with misdn and BN8S0
Hi
i am experiencing some problem with asterisk and misdn
i've patched and recompiled the 2.6.15.5 kernel on the server
i use a BN8S0 card with alla channels in TE mode.
i can load hfcmulti and mISDN_dsp
i load this with:
/sbin/modprobe hfcmulti layermask=0xf protocol=0x22 type=0x08
and then
/sbin/modprobe mISDN_dsp
dmesg returns me the following:
Modular ISDN Stack core $Revision: 1.34 $
mISDNd: kernel daemon started
mISDNd: test event done
mISDN: HFC-multi driver Rev. 1.40
0 devices registered...
2007 Feb 14
1
Asterisk 1.4 and chan_misdn
...nnet(E), misdn(E), suppserv(E)
When I made the make b410p, all the misdn stuff was downloaded from
digium's ftp. Also, running /etc/init.d/misdn-init --scan show me the 2
cards I have, /etc/init.d/misdn-init --config prepare me the misdn.conf
and after a /etc/init.d/misdn-init start I see:
mISDN_dsp 191656 0
mISDN_capi 88716 0
mISDN_l2 34452 0
mISDN_l1 11036 0
mISDN_core 71360 6
mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
kernelcapi 44576 2 mISDN_capi,capi
My questions: why Asterisk doesn't want...
2004 Oct 20
2
chan_mISDN problem
...39;m using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output:
Module Size Used by
zaptel 178308 0
avmfritz 21388 0
mISDN_isac 14336 1 avmfritz
mISDN_dsp 191424 0
l3udss1 34184 0
mISDN_l2 39040 0
mISDN_l1 11016 0
mISDN_core 67168 6 avmfritz,mISDN_isac,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1
edd 9240 0
joydev 10304 0
sg...
2005 Jun 06
2
mISDN + chan_misdn.so + winbond issue
...Zaptel 1.0.7
chan_misdn build from chan_misdn-beta-0.0.3-rc6 and against
mISDNuser-CVS-2004-08-29.
The /dev/mISDN node was also created.
I'm loading the kernel modules this way:
modprobe zaptel
modprobe ztdummy
modprobe mISDN_core
modprobe mISDN_l1
modprobe mISDN_l2
modprobe l3udss1
modprobe mISDN_dsp
modprobe w6692pci protocol=2 layermask=1
Then I start asterisk:
asterisk -c -vvvvvv -dddddd
When loading chan_misdn.so , Asterisk complains and exits after the
last error line below
" [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri))
debug_init: using stdout for debug log
de...
2007 Jun 21
0
mISDN problems
.../install-misdn-mqueue/mISDN-1_1_4# misdn-init
start
-----------------------------------------
Loading module(s) for your misdn-cards:
-----------------------------------------
/sbin/modprobe --ignore-install hfcmulti type=0x1 protocol=0x12,0x22
layermask=0x3,0xf poll=128 debug=0x88
/sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=160 dtmfthreshold=100
dmesg related output:
Modular ISDN Stack core version (1_1_4) revision ($Revision: 1.40 $)
mISDNd: kernel daemon started (current:c2c2bac0)
ISDN L1 driver version 1.20
mISDNd: test event done
ISDN L2 driver version 1.32
mISDN: DSS1 Rev. 1.47
mISDN Ca...
2010 Apr 11
2
mISDN installation via yum
...re-install l3udss1 debug=0
FATAL: Module l3udss1 not found.
>> /sbin/modprobe --ignore-install mISDN_capi
FATAL: Module mISDN_capi not found.
>> /sbin/modprobe --ignore-install avmfritz protocol=0x2 layermask=0xf
FATAL: Module avmfritz not found.
>> /sbin/modprobe --ignore-install mISDN_dsp debug=0 options=0
FATAL: Module mISDN_dsp not found.
creating device node: /dev/mISDN
Syslog reports:
Apr 11 22:45:04 office kernel: CAPI Subsystem Rev 1.1.2.8
Apr 11 22:45:04 office kernel: capifs: Rev 1.1.2.3
Apr 11 22:45:04 office kernel: capi20: Rev 1.1.2.7: started up with
major 68 (middlewar...
2007 Jul 24
0
mISDN & Asterisk 1.4: HFC-S card not responsive
...CI/PnP: reset
AVM PCI/PnP: S0/S1 7/0
Fritz1 ISAC STAR 48
Fritz1 ISAC MODE 0
Fritz1 ISAC ADF2 0
Fritz1 ISAC ISTA 0
Fritz1 ISAC CIR0 7c
mISDN_isac_init: ISAC version (0): 2086/2186 V1.1
Fritz1 HDLC 1 STA 81000000
Fritz1 HDLC 2 STA 0
AVM Fritz!PCI: IRQ 22 count 2
fritz 1 cards installed
/sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=128 dtmfthreshold=100
mISDN_dsp: Audio DSP Rev. 1.29 (debug=0x0) EchoCancellor MG2
dtmfthreshold(100)
mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies.
[i] creating device node: /dev/mISDN
[root at odysseus asterisk-1.4.8]#
===== dmesg output after loadin...
2006 Oct 18
2
echotraining=yes in misdn.conf is invalid or out of range.
Hi.
I'm having problems with chan_mISDN configuration. Line
"echotraining=yes" causes warning, when Asterisk is parsing misdn.conf
and I'm confused why the PBX doesn't accept the setting. No matter
which section I try to offer it, it is always invalid or out of range.
The setting itself is supposed to be valid, it is in the sample
configuration file of chan_mISDN 0.3.1.
2005 Feb 17
0
started asterisk with chan_misdn
..._destroy instead!
== Registered channel type 'mISDN' (This driver enables
the asterisk to use hardware which is supported by the new
)
Bidx 0
--> Child 10000101
Bidx 1
--> Child 10000201
No Upper ID
my lsmod:
Module Size Used by
hfcpci 28716 0
mISDN_dsp 197248 0
l3udss1 32008 0
mISDN_l2 38272 0
mISDN_l1 10632 0
mISDN_core 77732 5
hfcpci,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1
md5 4352 1
ipv6 235840 26
parport_pc 25024 1
lp...
2005 Jun 04
0
Problem with X100P (ZT_SPANCONFIG failed)
...smod says:
<br>
</span><b>asterisk:~# lsmod
<br>
Module Size Used by
<br>
wcfxo 12032 0
<br>
zaptel 219556 1 wcfxo
<br>
hfcsusb 28712 0
<br>
mISDN_dtmf 8968 0
<br>
mISDN_dsp 191968 0
<br>
mISDN_x25dte 30204 0
<br>
mISDN_core 73796 4
hfcsusb,mISDN_dtmf,mISDN_dsp,mISDN_x25dte
</b><br>
<span class="postbody"><br>
<br>
/etc/zaptel.conf:
<br>
</span><b># hfc-s pci a sp...
2006 Jun 09
1
Asterisk, mISDN and a Fritz card
Hi,
I've been having problems getting Asterisk to work with a fritz card (in
ptp mode). We've managed to get everything configured, however, as soon
as the call is connected we get "Unhandled message: prim 281 len -22 from
addr 1000000, dinfo 0 on this port"
I checked, and mISDN_dsp is loaded.
Any help would be much appreciated!
Regards,
Chris Jones // Network Administrator
Top Level Internet
e: chrisj@toplevel.net.au
2007 Jul 27
1
chan_mISDN module does not load
...uro ISDN)
-> childcnt: 2
--------
Port 4: TE-mode BRI S/T interface line (for phone
lines)
-> Interface is Poin-To-Point.
-> Protocol: DSS1 (Euro ISDN)
-> childcnt: 2
--------
mISDN_close: fid(3) isize(131072) inbuf(0x804c060)
irp(0x804c060) iend(0x804c060)
# lsmod | grep -i isdn
mISDN_dsp 184456 0
mISDN_capi 75436 0
mISDN_l2 28628 0
mISDN_l1 8444 0
kernelcapi 27616 2 mISDN_capi,capi
mISDN_core 55424 6
mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
I installed asterisk-chan_misdn from
http://...
2007 Dec 15
0
OpenVox B800P and asterisk 1.4/ mISDN-1_1_7
...gistered application 'misdn_facility'
== Registered application 'misdn_check_l2l1'
P[ 0] -- mISDN Channel Driver Registered --
chan_misdn.so => (Channel driver for mISDN Support (BRI/PRI))
****************** ASTERISK CLI
and in the kernel prints that in dmesg:
********* DMESG
mISDN_dsp: Audio DSP Rev. 1.29 (debug=0x0) EchoCancellor MG2
dtmfthreshold(100)
mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies.
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range...
2007 May 10
1
Cutted audio or 2/3s blanks on EuroISDN - Asterisk1.4
Your Zap conf files would be helpful. Zttest results? Cat
/proc/interrupts. Sharing interrupts?
Any funky error in the logs?
Thanks,
Steve Totaro
http://www.asteriskhelpdesk.com
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-
> bounces@lists.digium.com] On Behalf Of Administrator TOOTAI
> Sent: Thursday, May 10, 2007 6:24 AM
2007 Mar 22
1
Problem in using Two BRi Cards in Asterisk
...p with major 68 (middleware+capifs) Modular ISDN Stack core
$Revision: 1.37 $
mISDNd: kernel daemon started (current:ca4d8680)
mISDNd: test event done
ISDN L1 driver version 1.18
ISDN L2 driver version 1.31
mISDN: DSS1 Rev. 1.42
mISDN Capi 2.0 driver file version 1.20
ISAC module $Revision: 1.17 $
mISDN_dsp: Audio DSP Rev. 1.24 (debug=0x0) EchoCancellor MG2
dtmftreshold(100)
mISDN_dsp: DSP clocks every 64 samples. This equals 8 jiffies.
DTMF modul version 1.16
Traverse Tech. NETjet-S driver, revision 1.6
nj_probe(mISDN): found adapter NETJet S at 0000:00:0b.0 NETJet setup_instance: protocol is 2
lay...
2009 Jan 13
3
mISDN BRI Asterisk 1.4
...card to be in both TE and NT Mode (as shown above) as well as using link=ptp or ptmp in the mISDN.conf file:
<mISDNconf>
<module poll="128" debug="0" timer="no">hfcmulti</module>
<module debug="0" options="0">mISDN_dsp</module>
<devnode user="root" group="root" mode="644">mISDN</devnode>
<card type="BN4S0">
<port mode="nt" link="ptp">1</port>
<port mode="nt"...
2007 May 21
1
CAS signalling conflicts with Clear channel
...I/O ports at 03f4
I/O ports at 0170
I/O ports at 0374
I/O ports at 08b0
00:0f.3 ISA bridge: Broadcom GCLE-2 Host Bridge
Subsystem: Broadcom Unknown device 0230
Flags: bus master, medium devsel, latency 0
# lsmod
Module Size Used by
mISDN_dsp 183464 0
hfcmulti 61548 0
mISDN_capi 75436 0
l3udss1 29788 0
mISDN_l2 28628 0
mISDN_l1 8444 0
mISDN_core 55424 6
mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1
wcte12xp 30016...
2005 Jul 25
4
Fritz PCI card in ptp mode with chan_misdn
...unknown port(1) type 0x00000000
No lower Id port:1
init_stack: Success
aster1:/etc/asterisk #
But the above message "init_stack: Success" is not true.
The mISDN stuff is loaded as follows:
modprobe mISDN_core
modprobe mISDN_l1 debug=0
modprobe mISDN_l2 debug=0
modprobe l3udss1
modprobe mISDN_dsp debug=0 options=0x0
modprobe avmfritz layermask=0xf protocol=0x22
The relevant misdn.conf show:
; chan_misdn sample config
; general section:
;
[general]
; define your default context here
context=misdn
; default language
language=en
; set debugging flag:
; 0 - No Debug
; 1 - mISDN Messages and...