Steve Totaro
2007-May-10 04:26 UTC
[asterisk-users] Cutted audio or 2/3s blanks on EuroISDN - Asterisk1.4
Your Zap conf files would be helpful. Zttest results? Cat /proc/interrupts. Sharing interrupts? Any funky error in the logs? Thanks, Steve Totaro http://www.asteriskhelpdesk.com> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Administrator TOOTAI > Sent: Thursday, May 10, 2007 6:24 AM > To: Asterisk-Users > Subject: [asterisk-users] Cutted audio or 2/3s blanks on EuroISDN - > Asterisk1.4 > > Morning all, > > we face a strange problem on a dual Xeon server with 2 GB RAM and 2 > B410P cards. On ISDN calls, audio is sometimes poor (micro > cutted/scratched) even cutted during few seconds (2 or 3). Problem > appears only on some calls and isn't reproducable. > > Kernel is a Debian/Etch 2.6.17-4 amd64. We are using misdn1.1.2 with: > > Asterisk SVN-branch-1.4-r62218 built by root @ SrvPhone on a x86_64 > running Linux on 2007-05-05 13:42:13 UTC > > Cards are setted in TE-PTP mode, 7 of the 8 ports are used. Telco is > Belgacom - Belgium. They checked lines and tell they are ok. > > Thanks for any hint. > > -- > Daniel > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Administrator TOOTAI
2007-May-11 01:45 UTC
[asterisk-users] Cutted audio or 2/3s blanks on EuroISDN - Asterisk1.4
Steve Totaro a ?crit : Hi Steve> Your Zap conf files would be helpful. Zttest results? Cat > /proc/interrupts. Sharing interrupts?No. Zap con files should not be relevant as we are using ISDN. dh@SrvP:/home/asterisk/1.4/zaptel$ cat /etc/zaptel.conf loadzone = us defaultzone=us dh@SrvP:/home/asterisk/1.4/zaptel$ cat /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file ; ; You need to restart Asterisk to re-configure the Zap channel ; CLI> reload chan_zap.so ; will reload the configuration file, ; but not all configuration options are ; re-configured during a reload. [trunkgroups] [channels] ; context=default ; switchtype=national ; signalling=fxo_ls ; rxwink=300 ; Atlas seems to use long (250ms) winks ; usecallerid=yes ; hidecallerid=no ; callwaiting=yes ; usecallingpres=yes ; callwaitingcallerid=yes ; threewaycalling=yes ; transfer=yes ; canpark=yes ; cancallforward=yes ; callreturn=yes ; echocancel=yes ; echocancelwhenbridged=yes ; rxgain=0.0 txgain=0.0 ; group=1 ; make these both the same. Groups range from 0 to 63. ; callgroup=1 pickupgroup=1 ; immediate=no dh@SrvP:/home/asterisk/1.4/zaptel$ cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 109917508 0 0 0 IO-APIC-edge timer 1: 12365 0 0 0 IO-APIC-edge i8042 8: 444560118 0 0 0 IO-APIC-edge rtc 9: 0 0 0 0 IO-APIC-level acpi 12: 11367 0 0 0 IO-APIC-edge i8042 14: 3944731 0 0 0 IO-APIC-edge ide0 58: 0 0 0 0 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb3, ehci_hcd:usb5 66: 0 0 0 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb4 74: 4552211 0 0 0 IO-APIC-level libata 90: 18418187 0 0 0 PCI-MSI eth0 98: 27358592 0 0 0 IO-APIC-level HFC-multi 106: 27358571 0 0 0 IO-APIC-level HFC-multi NMI: 14333 691 827 1273 LOC: 109917988 109917975 109917950 109917910 ERR: 0 MIS: 0 We use ztdummy for Meetme: dh@SrvP:/home/asterisk/1.4/zaptel$ sudo ./zttest Opened pseudo zap interface, measuring accuracy... 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.951172% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.951172% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.963379% 99.938965% 99.963379% 99.938965% 99.963379% 99.938965% --- Results after 87 passes --- Best: 99.963379 -- Worst: 99.938965 -- Average: 99.952721 lsmod, zttranscode was loaded, I remove it: dh@SrvPhone:/home/asterisk/1.4/zaptel$ lsmod Module Size Used by ztdummy 10056 0 tcp_diag 6400 0 inet_diag 16784 1 tcp_diag mISDN_dsp 201384 1 hfcmulti 79884 1 mISDN_capi 107116 1 l3udss1 46744 1 mISDN_l2 44616 1 mISDN_l1 17560 1 mISDN_core 88224 6 mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 capi 23616 0 capifs 11152 2 capi kernelcapi 56640 2 mISDN_capi,capi zaptel 197608 7 ztdummy crc_ccitt 6784 1 zaptel ipv6 285664 34 ppdev 14088 0 parport_pc 41640 0 lp 17736 0 parport 44684 3 ppdev,parport_pc,lp button 12192 0 ac 10376 0 battery 15496 0 dm_snapshot 20664 0 dm_mirror 25216 0 dm_mod 62800 2 dm_snapshot,dm_mirror loop 20112 0 tsdev 13056 0 i2c_i801 13076 0 serio_raw 12036 0 i2c_core 27776 1 i2c_i801 pcspkr 7808 0 psmouse 44432 0 shpchp 42156 0 pci_hotplug 20872 1 shpchp evdev 15360 1 ext3 138512 3 jbd 65392 1 ext3 mbcache 14216 1 ext3 raid1 27008 4 md_mod 82844 5 raid1 ide_generic 5760 0 [permanent] ide_cd 45088 0 cdrom 40488 1 ide_cd generic 11396 0 [permanent] sd_mod 25856 10 ahci 24708 8 libata 106784 1 ahci scsi_mod 153008 3 sd_mod,ahci,libata piix 15492 0 [permanent] ide_core 147584 4 ide_generic,ide_cd,generic,piix ehci_hcd 36104 0 e1000 123968 0 uhci_hcd 28696 0 thermal 20240 0 processor 38248 1 thermal fan 9864 0> > Any funky error in the logs?Nothing. Thanks for your help.> > >> -----Original Message----- >> [...] >> Morning all, >> >> we face a strange problem on a dual Xeon server with 2 GB RAM and 2 >> B410P cards. On ISDN calls, audio is sometimes poor (micro >> cutted/scratched) even cutted during few seconds (2 or 3). Problem >> appears only on some calls and isn't reproducable. >> >> Kernel is a Debian/Etch 2.6.17-4 amd64. We are using misdn1.1.2 with: >> >> Asterisk SVN-branch-1.4-r62218 built by root @ SrvPhone on a x86_64 >> running Linux on 2007-05-05 13:42:13 UTC >> >> Cards are setted in TE-PTP mode, 7 of the 8 ports are used. Telco is >> Belgacom - Belgium. They checked lines and tell they are ok. >> >> Thanks for any hint. >> >> -- >> Daniel