search for: miibus1

I've plugged in two 3com OfficeConnect 10/100 3CSOHO100B-TX in my freebsd 4.8 box and they are not detected. Do I have to enable some support in the kernel ? Cheers Hannes

...8a:54:08:14 bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bc0000-0xf6bcffff, 0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 at device 0.1 on pci3 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: <MII bus> on bge1 bge1: Ethernet address: 2c:76:8a:54:08:15 bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6b90000-0xf6b9ffff, 0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 a...

I'm experiencing similar problems with a 3C996-T under 4.8-REL. In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The

...port 0x6000-0x60ff mem 0x40000000-0x40000fff,0x40001400-0x400014ff irq 11 at device 9.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking dc0: <Intel 21143 10/100BaseTX> port 0x6400-0x647f mem 0x40001000-0x400013ff irq 9 at device 10.0 on pci1 dc0: Ethernet address: 00:40:f4:23:02:65 miibus1: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <unknown card> (vendor=0x11d4, dev=0x1805) at 13.0 irq 15 isab0: <PCI to EISA bridge (vendor=0e11 device=0001)> at device 20.0 on pc...

...t;MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:01:02:e0:04:1b xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem 0xfceff800-0xfceff87f irq 20 at device 12.0 on pci2 miibus1: <MII bus> on xl1 xlphy1: <3c905C 10/100 internal PHY> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:01:02:df:fe:ed --------------------------------------------- Another doubt would be my kernel config, maybe there is something wrong...

...15 on atapci0 pcm0: <VIA VT8235> port 0xdc00-0xdcff irq 11 at device 17.5 on pci0 pcm0: <unknown ac97 codec> (id=0x56494161) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xdffffd00-0xdffffdff irq 11 at device 18.0 on pci0 vr0: Ethernet address: 00:e0:18:ad:3a:7f miibus1: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive...

...HY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:11:25:1e:23:a4 bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfe020000-0xfe02ffff,0xfe030000-0xfe03ffff irq 25 at device 1.1 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:11:25:1e:23:a5 pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attac...

...device 28.5 on pci0 pci3: <ACPI PCI bus> on pcib3 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 17 at device 0.0 on pci3 re1: Using 1 MSI-X message re1: Chip rev. 0x2c800000 re1: MAC rev. 0x00000000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000ba...

...inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:03:47:3a:97:a5 fxp1: <Intel 82559 Pro/100 Ethernet> port 0x1840-0x187f mem 0xf4002000-0xf4002fff,0xf4200000-0xf42fffff irq 18 at device 4.0 on pci0 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:30:6e:06:8b:10 pci0: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x1040-0x104f at...

...t;BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf00000-0xfcf0ffff irq 13 at device 8.0 on pci3 bge1: Ethernet address: 00:06:5b:8d:20:5f miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard IOAPIC #1 intpin 14 -> irq 16 pci4: <PCI...

...TX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:15:60:5f:66:fe pcib3: <PCIBIOS PCI-PCI bridge> irq 5 at device 5.0 on pci0 pci3: <PCI bus> on pcib3 bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xdd200000-0xdd20ffff irq 5 at device 0.0 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:15:60:5f:66:ff pcib4: <PCIBIOS PCI-PCI bridge> irq 5 at device 6.0 on pci0 pci4: <PCI bus...

Hi. I got this on today's RELENG_6 with Broadcom BCM5722 A0, ASIC rev. 0xa200. >From dmesg (bge related): bge0: <Broadcom BCM5722 A0, ASIC rev. 0xa200> mem 0xe8400000-0xe840ffff irq 16 at device 0.0 on pci2 bge0: firmware handshake timed out, found 0x4b657654 bge0: firmware handshake timed out, found 0x4b657654 bge0: EEPROM read timed out bge0: failed to read EEPROM device_attach:

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...lt;MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: <RealTek 8139 10/100BaseTX> port 0x8800-0x88ff mem 0xc6000000-0xc60000ff ir q 11 at device 12.0 on pci0 rl1: Ethernet address: 00:e0:7d:e3:2c:74 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0 fdc0: <NEC 7...

...0 IOAPIC #0 intpin 19 -> irq 9 IOAPIC #0 intpin 18 -> irq 10 pci2: <PCI bus> on pcib2 pci2: <OHCI USB controller> at 0.0 irq 9 rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xf1000000-0xf10000ff irq 10 at device 5.0 on pci2 rl0: Ethernet address: 00:50:fc:61:6a:6f miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto twe0: <3ware Storage Controller> port 0xa400-0xa40f mem 0xf0000000-0xf07fffff,0xf0800000-0xf080000f irq 2 at device 6.0 on pci2 twe0: 2 ports, Fir...

...0baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:16:35:05:b6:dd bge0: [ITHREAD] bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:16:35:05:b6:dc bge1: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 pci4:...

...t;BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7fa0000-0xf7faffff irq 10 at device 6.0 on pci1 bge1: Ethernet address: 00:08:02:a0:c5:07 miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <ATI Mach64-GR graphics...

...0 brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5701 Gigabit Ethernet> mem 0xeff00000-0xeff0ffff irq 18 at device 8.0 on pci5 bge1: Ethernet address: 00:06:5b:f3:09:7e miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib4: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 14 -> irq 19 pci6: <PCI bus> on pcib4 pcib10: &l...

...1 on pci2 bge1: APE FW version: NCSI v1.0.80.0 bge1: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 265 to local APIC 0 vector 60 bge1: using IRQ 265 for MSI bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E bge1: Disabling fastboot bge1: Disabling fastboot miibus1: <MII bus> on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: OUI 0x001be9, model 0x0036, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached b...

Hello, Before a couple of days ago I started /usr/local/sbin/cupsd manualy from console. When I press CTRL+C to interrupt a program, the system change runlevel and going to reboot. This was on FreeBSD V5.3, today I installed fresh new 5.4 but the problem is the same. cups-base-1.1.23.0_3 -- Todor Dragnev <todor.dragnev@gmail.com>