search for: microlink

...generic hidups device. >> There is no good reason for customizing a driver profile to be >> so difficult. >> >> >> well, I'm unsure since I'm just opening this "APC Modbus Pandora box" >> but if I understand correctly, your new unit is a microlink one. >> > > MAYBE. > > HIS UPS is a BackUPS not a SmartUPS. Originally the APC BackUPS DID NOT > SUPPORT any Smart protocol (the original UPSLink protocol) > > But over the years it's been observed that APC has somewhat "fudged" on > the BackUPS UPSes....

...: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP9620 I found and started researching NUT, and would prefer using NUT with this APC and future purchases of NUT-compatible hardware from OEMs other than APC, e.g. Eaton. I see a prior thread discussing the unfortunate proprietary microlink protocol: Subject: Re: APC Smart-UPS 1200 Date: 2012-10-04 14:55:55 GMT My question is whether microlink is what is actually used for a TCP/IP connection to the AP9631 network card, or whether another protocol such as SNMP is available for NUT to use. Even a lower count of UPS metrics via SNMP wo...

...erson calling experiences very choppy sound. There are no breaks in the sound, but it is very choppy, to the point where a conversation is not possible. I installed Asterisk from CVS earlier this week. It is running on RedHat 9, with a XP1600+ Processor, 384MB RAM. The ISDN card is an 'Elsa Microlink ISDN PCI'. I've searched through the archives but cannot find a resolution to the problem. I've tried changing the compression used but this has little or no effect. Has anyone got any hints or tips? Thanks, Nathan.

...This is definitely USB and probably a fairly generic hidups device. > There is no good reason for customizing a driver profile to be > so difficult. > well, I'm unsure since I'm just opening this "APC Modbus Pandora box" but if I understand correctly, your new unit is a microlink one. though the serial version should be Modbus only, I can't say at first if the USB ones implement if full Modbus over HID or any other mean. I would need traces to give more info. anyway, this may not be as generic USB as you think. What I'd like to do is this: confer in real-time, per...

On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > Bye the way I just realize that I can't retrieve the ups.load, among other > thing :-( To the best of my knowledge, Microlink is not supported by any third-party tools (including NUT), but some variables are exposed via standard USB HID. Apparently, ups.load is not one of them. Your UPS might support MODBUS: http://lists.alioth.debian.org/pipermail/nut-upsdev/2014-July/006769.html but we need developers to help add...

...elco1 (Intelig) send alarms and I do not sync to then. I have another PRI circuit used for data connections from Telco2 and I used it for testing. Telco2 (Telemar) do not send alarms and I sync to then. Does anybody have some idea about what is happening? Regards []s -- Alex G Robertson NOC - Microlink

...ault) (Slaves: 01) > Channel 02: FXO Loopstart (Default) (Slaves: 02) > > 2 channels configured. > > > Any other ideas? > > Thanks, > Anon > > > --__--__-- > > Message: 3 > Date: Sun, 11 Apr 2004 21:57:44 -0300 > From: Alex G Robertson <alex@microlink.com.br> > Organization: Microlink > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] newbie - Asterix and modem > cards > Reply-To: asterisk-users@lists.digium.com > > Hi all, > > > I would like to make IP calls using a conventional > phone plug...

...Lepple <clepple at gmail.com> ?crivait: > On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > > > Bye the way I just realize that I can't retrieve the ups.load, among other > > thing :-( > > To the best of my knowledge, Microlink is not supported by any third-party tools (including NUT), but some variables are exposed via standard USB HID. Apparently, ups.load is not one of them. > > Your UPS might support MODBUS: > > http://lists.alioth.debian.org/pipermail/nut-upsdev/2014-July/006769.html > > but w...

Hello, I'm a new user of asterisk. I'm looking for a german or simple english howto, or a description for the following configuration. City One: ISDN telefonadapter with ISDN and analog devices | Server with a Elsa MicroLink ISDN/PCF Card | Connection via VPN or direct, as needed | Server with a Elsa MicroLink ISDN/PCF Card | City Two: ISDN telefonadapter with ISDN and analog devices I've also a SIP account, which I want to integrate...

....current variable is however limited to only an integer and thus gives quite bad resolution. So I decided to hook up the UPS with the serial cable instead, but I failed to find a suitable driver. The apcsmart driver does not work because the new SURTD line uses a new type of signaling called "Microlink Serial Protocol": http://www.apc-forums.com/thread.jspa?threadID=2586 Does anyone know if NUT has support for this Microlink protocol? Regards, Marcus -- Marcus Wellhardh e-mail: wellhardh at roxen.com Roxen Internet Software AB Support: +46 13 376804

I think the time for me to get involved in NUT documentation has come again. Late last week I had to buy a UPS under time pressure. The Eaton unit that thus project gifted me with in 2006(?) died during a severe thunderstorm watch, so it was off to MicroCenter to get a replacement pronto. I wound up buying an APC BN700MC. It was what they had in the performance range I needed. The removable

...APC has switched to a > proprietary MODBUS-over-USB protocol that they have not publicly > documented [1]. That is not true. The MODBUS protocol has been documented by APC and the open source apcupsd program supports it. The proprietary protocol APC uses is yet another protocol they call microlink. And the UPSLink protocol that NUT supports is still available via use of an add-on card. Plus, many of the APC UPSes (the backups line) are simple UPSes and don't use either the smartlink or the modbus protocol they use a variant of the old upslink over usb. Someone could write a driver...

...<tedm at mittelstaedt.us> wrote: > Someone could write a driver for MODBUS for NUT, all of the information > and materials are available to do it. The simple fact of it is that the > reason no one has done so is that the apcupsd program is available. You're right, it's the microlink protocol that they have been promising to release. My mistake. We even have a branch where Arnaud was starting to write some code against libmodbus. However, the documentation seems to lag the introduction of the new products that all of a sudden don't work with existing software. > I guess...

...don't have much experience with NUT yet so I'm not sure what the next course of action is. I do have NUT for Windows working with a Tripp-Lite unit (USB HID style). Thank you! --- Back-story: I've been lead to believe that Eaton is a good Tier 2 UPS vendor (APC being Tier 1). This microlink business with APC has been driving me away from them. So I got what I thought would be a good alternative to my usual APC RS 500's for desktop systems at our remote clients. It is an Eaton 5110 500VA (103004256-5591). I also thought it would be a good brand because of what looked like grea...

On Feb 11, 2008 5:30 PM, Marcio Gomes <mpg at microlink.com.br> wrote: > I change the if in [OFF] detect state to, in original way, if you send a > reset.watchdog, the UPS goes > to OFF state in clients, but it is not correct, because UPS is OL and > Shutdown are in progress, but > the power is not OFF First of all, thanks for the pat...

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs over and over again: chan_zap.c:8009 pri_dchannel: Ring requested on unconfigured channel 255/255 span...

...s out under the hood without changing the model name. Sometimes it is for the better - Powercom shifted to a standard USB HID PDC interface (which was easier to support in NUT). However, APC apparently dropped support for a lot of variables from their HID PDC interface in favor of their proprietary Microlink protocol (see apcupsd.com for more information). Maybe we can steer people away from bad UPS models or vendors, but in the end, if I were purchasing a new UPS, I would want a no-questions-asked, open box refund policy from the distributor. Alf: I like this idea, but I don't have the free time...

Hi, I need to get a USB based UPS for a system which is running NUT 2.0.4 (a Debian Etch system). Does anyone know of a UPS that I can buy today that is supported by 2.0.4? Unfortunately upgrading the OS (and NUT) isn't an option. Previously, we used the Powerware 5110 (which used the bcmxcp_usb driver) and that worked fine, however that UPS has been discontinued and is no longer

...ote: > >> Someone could write a driver for MODBUS for NUT, all of the >> information and materials are available to do it. The simple fact >> of it is that the reason no one has done so is that the apcupsd >> program is available. > > You're right, it's the microlink protocol that they have been > promising to release. My mistake. We even have a branch where Arnaud > was starting to write some code against libmodbus. Why don't you just lift all the APC modbus code from the modbus module in apcupsd? The work is already done there. > However, the...

Hi When purchasing a new UPS, one of the major functionalities I would assess, is the support is has by NUT. We have the http://www.networkupstools.org/stable-hcl.html page, where we can see if a UPS is supported, and what the level is. But I would really like to have more knowledge. I would like to know how the output from the "upsc" looks, so I know what values I will get from the