search for: md3200

It seems that the Apollo MD3200 winmodem sold my newegg no longer uses the MD3200 chipset. At least the $13 version I ordered arrived with a different chipset. I made them aware of the issue and hopefully they will be changing their description soon. Anyway, I'm looking for a new source now, anyone know where to get these ca...

We are looking at building a storage platform based on Dell HW + ZFS (likely Nexenta). Going Dell because they can provide solid HW support globally. Are any of you using the MD1200 JBOD with head units *without* an MD3200 in front? We are being told that the MD1200''s won''t "daisy chain" unless the MD3200 is involved. We would be looking to use some sort of LSI-based SAS controller on the Dell front-end servers. Looking to confirm from folks who have this deployed in the wild. Perhaps y...

...ndor codes. Then, I ran into the problem that the serial driver claimed the device, disallowing the zaptel wcfxo driver to grab it. The following patches fix those problems, BUT, further investigation reveals this card is not compatible. It's not clear how different the 537EP is from teh MD3200 / X100P; might be worth checking into. http://linmodems.technion.ac.il/packages/Intel/537/ is Intel's site containing linux modem drivers for the 537 line, and these appear to include voice features. Not sure if duplex and if compatible with Asterisk voicemodem driver. Again, might be wo...

...risk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kerry Garrison Sent: Tuesday, May 02, 2006 10:51 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Need help configuring TE100P and 3 X100Pclonewith MD3200 chipset Are you seriously trying to run 4 cards in one system? The odds of getting that working are about the odds of Angelina Jolie showing up on my doorstep ready to whisk me off to....but I digress...you will have serious interrupt issues trying to get 4 cardss working in one system. I am surpr...

I've just give a look to the website http://www.voip-info.org/wiki-Asterisk+Hardware If I understand very well, the Intel modems marked with 537 or MD3200 chipset should work with Asterisk ?! If it is true, I'd like to know how to configure Asterisk ? Thanks a lot. --------------------------------- D?couvrez le nouveau Yahoo! Mail : 1 Go d'espace de stockage pour vos mails, photos et vid?os ! Cr?ez votre Yahoo! Mail -------------- next...

...asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of steve@daviesfam.org Sent: Tuesday, May 02, 2006 10:54 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Need help configuring TE100P and 3 X100P clonewith MD3200 chipset On Tue, 2 May 2006, Wai Wu wrote: > [root@asterix root]# modprobe zaptel > [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on > channel 25: No such device or address (6) > /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed > /lib/modules/2.4...

Salve Salve Galera. Tenho a seguinte situacao: Uma placa MD3200 ligada em uma linha telefonica comum(PTSN) e funcionando "belezinha"... Tenho configurado um URA, onde ele atende a ligacao que chegou no canal e solicita o numero do ramal de destino da liga??o: Acontece que ao discar o ramal de destino, ele nao encaminha a ligacao, ficando mudo e post...

Does asterisk support the intel 537/md3200 chipset? I don't want to start any flames here, I know all about using generic crap in asterisk,[*] which I really don't approve of other than for testing, but I have a customer demanding a generic chipset for his one backup analog line. He will not spend the money for a Digium card and...

I can either get the TE100P working or the 3 X100P clones working, but never both. I have the TE100P connected to a channel bank, and X100P clones to lines from the phone company. This is my zaptel.conf span=1,1,0,d4,ami fxsks=1-24 loadzone=us fxols=25-27 loadzone=us I then do [root@asterix root]# modprobe zaptel [root@asterix root]# modprobe wcte11xp ZT_CHANCONFIG failed on channel

...sterisk solution, in particular, if I had read this thread: http://lists.digium.com/pipermail/asterisk-users/2004-April/044421.html ... then I wouldn't be writing here now because I would have realized sooner that the native generic compatibility of the wcfxo driver is really only with the MD3200 (Cirrus Logic/Ambient) chipset, which is found on the 537PG and 537PU versions and not on the 537EPs. Okay, so no big deal, I can get different modems. But remember, this is an educational endeavor for me, and I have to ask myself, "Why isn't the wcfxo driver compatible with the 573E...

...being offered by Digium, what is the best solution? I seem to have run into a few posts where people talk about problems they've had with their X100P clone cards (dropping calls, echos, etc) other people seem to not have any problems. Of the three chipsets that will work: Intel 537EP, Ambient MD3200, and Motorola 62802 (as seen here http://www.voip-info.org/tiki-index.php?page=X100P+clone ) Is one of them more stable than another? What modem cards have you had the best luck with? Are there any ones to stay away from? I'll be using this for home use, so absolute reliability is not necissar...

Do normal modems work with asterisk?

X101P with Ambient md3200 chip on it, with the zaptel wcfxo driver.... Just an indication of how many people have got this to work would be useful. Cheers Mark.

I'm new to asterisk and fror a cupple of days I heave been googleing the net for digium "clones", because it's very hard for me to get a digium card (X100P). Does anyone Know another substitute for X100P (I know that intel based modem with chip 537/MD3200 is working but I did not find any of those) ? I made it work with an Intel 536 (with a costumised driver that I found on the asterisk-users archive*) voice modem but the voice from the PSTN is not routed thought the SIP channels, you can only hear it in the modem's speaker. Does anyone know...

...either missing or garbled). I suspect this is due to 'training error' (see below) which, according to Steve Underwood's postings, cannot be resolved further. I wonder if it would help to upgrade my test machine which uses Asus m/b + Celeron 2.4GHz cpu + 512MB Ram + 2 Clone X100P cards (MD3200 chipset based) + RH 7.3. Secondly, will the use of a Digium card fix the problem? Thank you for sharing your inputs. Steve FH ++++++++++++++++++++++++++++++++++++++++++++++++ -- Executing RxFAX("Zap/2-1", "/var/spool/asterisk/incoming/1110539705.0.tif") in new stack Mar 1...

I am starting to dip my toes into the asterisk world, and to that end I've scavenged an old PC (this is a home project, and I have basically $0 to spend on it), and installed FC1. I've purchased a clone X100P (or at least I was told it was), and I am trying to get it to work. However, when I try and load the wcfxo module, I get the following errors... [root@loudhoward root]# insmod

Hi All, I've got an MD3200 modem which is working as a Zaptel FXO interface for Asterisk (X100P clone I believe). It seems to work, but on incoming or outgoing calls I can hear the other party ok but when I speak, I hear my voice echo back at me (quite quietly but it's distracting!) on everything I say. The other party d...

Hello, I have asterisk running on Fedora Core 3 with a x100p (oem). After some time I got asterisk with some soft extensions working (u gotta love open source), but I'm stuck with outbound dialing. This is the diagnose: - detect 1 wcfxo channel. - when trying to make an outside call I get unable to create channel of type Zap. Everyone is busy/congested at this time - When I plug the x100p

hi, i've a question. is it possible to buy digium x100p card from italy in some store (also online) without ordering it from USA? on more, did anyone buy a modem with intel chipset 537 or md3200 and where (in italy)? Thanks __________________________________________________________________ Tiscali ADSL Senza Canone, paga solo quello che consumi! Non perdere la promozione valida fino al 27 luglio. Per te gratis il modem in comodato e l'attivazione. In piu' navighi a soli 1,5 euro...

And if you want to use it with windows telephony software, such as answering machine or modem communications software, you can probably take the drivers for the Intel MD3200 based modem, modify the .inf for the Digium vendor and device ID. I have not tried this, but since the MD3200 modem works that way in Linux, the X100P may work that way in Windows. Then you would have a $100 winmodem! Let us know what you find out. Jeremy -----Original Message----- From: Matte...