search for: macbackup

...pp Lite Internet600U David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start. (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB com...

...ernet600U   David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) U...

...0", GROUP="nut" Reload the udev rules udevadm control --reload-rules && udevadm trigger (and maybe unplug/replug the UPS) Then sudo systemctl start nut-driver Loads the driver, and following the rest of the steps ih the howto I see this output from upsc pi at elmer:/home/macbackup $ upsc tripplite Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 1753 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: INTERNET600U device.serial: 2922BVLBC87B601706 device.type: ups driv...

David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) U...

...pp Lite Internet600U David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start. (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB com...

...OUP="nut" Reload the udev rules  udevadm control --reload-rules && udevadm trigger (and maybe unplug/replug the UPS) Then  sudo systemctl start nut-driver Loads the driver, and following the rest of the steps ih the howto I see this output from upsc pi at elmer:/home/macbackup $ upsc tripplite Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 1753 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: INTERNET600U device.serial: 2922BVLBC87B601706 device.typ...

...[POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U David, That's exciting - but I am not seeing similar results. I *must* be doing something dumb - but I can't see it. I've got nut-2.7.4-8 installed on my pi Hope you can help. Tom pi at elmer:/home/macbackup $ lsusb | grep ipp Bus 001 Device 004: ID 09ae:3024 Tripp Lite pi at elmer:/home/macbackup $ sudo cat /etc/nut/nut.conf # Network UPS Tools: example nut.conf # ############################################################################## # General section #########################################...

...0", GROUP="nut" Reload the udev rules udevadm control --reload-rules && udevadm trigger (and maybe unplug/replug the UPS) Then sudo systemctl start nut-driver Loads the driver, and following the rest of the steps ih the howto I see this output from upsc pi at elmer:/home/macbackup $ upsc tripplite Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 1753 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: INTERNET600U device.serial: 2922BVLBC87B601706 device.type: ups driv...

David, Thanks again for your help today.  You're amazing. If the folks on the list could chime in - thoughts about what I could try next? May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale pi at elmer:/home/macbackup $ lsusb Bus 002 Device 006: ID 0bc2:3343 Seagate RSS LLC Bus 002 Device 005: ID 0bc2:3343 Seagate RSS LLC Bus 002 Device 004: ID 0bc2:ab38 Seagate RSS LLC Backup Plus Hub Bus 002 Device 003: ID 0bc2:ab45 Seagate RSS LLC Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd Bus 002 Device 001: ID 1d6b...

...rnet600U   David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) U...

...OUP="nut" Reload the udev rules  udevadm control --reload-rules && udevadm trigger (and maybe unplug/replug the UPS) Then  sudo systemctl start nut-driver Loads the driver, and following the rest of the steps ih the howto I see this output from upsc pi at elmer:/home/macbackup $ upsc tripplite Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 1753 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: INTERNET600U device.serial: 2922BVLBC87B601706 device.typ...

...pp Lite Internet600U David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start. (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB com...

Do we have enormous fragmentation here on our X4500 with Solaris 10, ZFS Version 10? What except zfs send/receive can be done to free the fragmented space? One ZFS was used for some month to store some large disk images (each 50GByte large) which are copied there with rsync. This ZFS then reports 6.39TByte usage with zfs list and only 2TByte usage with du. The other ZFS was used for similar

David, That's exciting - but I am not seeing similar results.  I *must* be doing something dumb - but I can't see it. I've got nut-2.7.4-8 installed on my pi Hope you can help. Tom pi at elmer:/home/macbackup $ lsusb | grep ipp Bus 001 Device 004: ID 09ae:3024 Tripp Lite pi at elmer:/home/macbackup $ sudo cat /etc/nut/nut.conf # Network UPS Tools: example nut.conf # ############################################################################## # General section #################################...

Tested a Ubuntu 18.04 LTS virtual machine with NUT 2.7.4 and a 3024 protocol Tripp Lite UPS (mine is a INTERNET550U, but same protocol) :/etc/nut$ lsusb | grep Tripp Bus 002 Device 004: ID 09ae:3024 Tripp Lite I it got generally working (outputting reasonable responses to upsc, although there are some issues with variables like frequency) by adding productid=3024 to my ups.conf. Like this: