search for: linux3

I just installed EMC PowerPath 5.0.0 and Navisphere Agent and CLI on a CentOS 4.4/x86_64 system. When I try to start naviagent, I get the error below. Before upgrading to CentOS4.4, this same system had RHEL3 ES for x86_64 on it, and the same problem was encountered. I spent weeks going back and forth with EMC tech support, but the problem was never resolved. I'm hoping someone here on this

I followed the instructions (I thought) for hfsplus on C7. Installed elrepo Then installed hfsplus hfsplus-tools and kmod-hfsplus kmod-hfs rpm -qa | grep hfs clearly shows the items kmod-hfsplus-0.0-2.el7.elrepo.x86_64 hfsplus-tools-540.1.linux3-4.el7.x86_64 kmod-hfs-0.0-2.el7.elrepo.x86_64 When I do my mount command mount -t hfsplus -o loop Mac.dmg /mnt/mac mount: unknown filesystem type hfsplus What did I miss? Thanks, Jerry

...et/sched/sch_hfsc.ko > /lib/modules/3.10.0-327.28.2.el7.x86_64/weak-updates/hfs > /lib/modules/3.10.0-327.28.2.el7.x86_64/weak-updates/hfs/hfs.ko > > The packages are installed: rpm -qa | grep hfs kmod-hfs-0.0-2.el7.elrepo.x86_64 kmod-hfsplus-0.0-2.el7.elrepo.x86_64 hfsplus-tools-540.1.linux3-4.el7.x86_64 modprobe hfsplus gives the error: hfsplus not found mkfs.hfsplus is present. but hfsplus is not available? why not. Thanks, Jerry

> modprobe hfsplus > I get an error doing that: modprobe hfsplus modprobe: FATAL: module hfsplus not found I redid the listing rpm -qa | grep hfs kmod-hfs-0.0-2.el7.elrepo.x86_64 kmod-hfsplus-0.0-2.el7.elrepo.x86_64 hfsplus-tools-540.1.linux3-4.el7.x86_64 Thoughts? Jerry On Tue, Aug 16, 2016 at 10:14 AM, Jerry Geis <geisj at pagestation.com> wrote: > I followed the instructions (I thought) for hfsplus on C7. > Installed elrepo > Then installed hfsplus hfsplus-tools and kmod-hfsplus kmod-hfs > rpm -qa | grep hfs c...

Igor asked about APPEND: > In other words: Can I break up a long line into multiple lines > in 5.01 or 5.10pre now or is that still not supported? I also wonder: can one control whether the INITRD parameter gets prepended or appended? Right now it seems to be placed after APPEND parameters, but might be more useful if it came first. The Debian/Ubuntu installers will copy parameters

greetings I am new to this list. I have recently compiled llvm-3.3 from sources. My machine has these: --cpu -amd64 --os- clbfs 64bit -linux3 series kernel --C/C++ compiler -modern versions gcc My preferred build tool is cmake. llvm is needed for MesaLib and the autotools build of llvm allows this option:- --enable-experimental-targets=R600 ( for example described here: http://www.linuxfromscratch.org/blfs/view/svn/general/llvm.ht...

>Please show: > >find /lib/modules -name hfs*.ko > >and > >rpm -qa kernel | sort rpm -qa | grep hfsplus kmod-hfsplus-0.0-2.el7.elrepo.x86_64 hfsplus-tools-540.1.linux3-4.el7.x86_64 [root at nuc5i3 ~]# [root at nuc5i3 ~]# find /lib/modules -name hfs*.ko /lib/modules/3.10.0-327.el7.x86_64/weak-updates/hfs/hfs.ko /lib/modules/3.10.0-327.el7.x86_64/weak-updates/hfsplus/hfsplus.ko /lib/modules/3.10.0-327.4.4.el7.x86_64/weak-updates/hfs/hfs.ko /lib/modules/3.10.0-327.4...

Hi List, I'm looking for an editor with file compare capabilities. Gedit and kate don't seem to do this? Thx Rainer

I'm trying to install it but it says your system has not been modified.what can i do help!!!

Hi all, when i try to smbmount an WinNT shared drive, i get the following message: mount error: Invalid argument And in my logfile i get at this time: Nov 9 18:02:33 linux3 kernel: smb_dont_catch_keepalive: server->data_ready == NULL On my other linux-system i can mount with the same command without any problems. have anyone an idea?? thx bye Sven

...me. I looked in the log.nmdb for messages, but the file is not being created. Following is my smb.conf file # Samba config file created using SWAT # from 172.16.55.21 (172.16.55.21) # Date: 2003/03/19 13:33:45 # Global parameters [global] security = user workgroup = ABCBSNET server string = LINUX3 log level = 5 log file = /var/log/samba/log.%m max log size = 1000 printcap name = cups wins server = 172.16.6.11 printing = cups [public] path = /home/public valid users = +usergroup read only = No create mask = 0660 directory mask = 0770 [printers] comment = All Printers path = /va...

...otocol ) using zebra software . I used iperf-1.7.0 to generate traffic from linux computer 1 to linux computer 3 . At router ( egress side ) I setup a simple qdisc as follow : tc qdisc add dev eth1 root handle 1: tbf rate 0.5 mbit burst 5kb latency 50ms and generate traffic as below: Iperf -c linux3 -u -b 0.1m -w 128k and the result is : Client connecting ...., udp .. Sending 1470 byte datagrams UDP buffer size : 128 Kbyte ( WARNING: reqested 128 KByte ) Local ... port.. connected with ... Interval Tranfer Bandwidth 0.0 - 10.2sec 125 KBytes 100 kbits/sec Se...

Hi All: I have some questions when writing a lib with libsmbclient-dev ,my target environment is on any linux system. 1 I want to static link libsmbclient.a instead of using libsmbclient.so, but I got a lot of error , am I able to use libsmbclient-dev using static link? 2 I found that ?smbtree? command is more stable in finding all those domains and servers than

...n that played back the queue message, called it from a skinny and it's fine. Any ideas? Also, I read somewhere that the two skinny implementations (chan_sccp and chan_skinny) were going to be merged, any news on this? Here's a skinny debug of a call being made to a queue: Linux3*CLI> skinny debug Skinny Debugging Enabled -- Starting simple switch on '111@steve' Collected digit: [6] -- Asked to indicate 'Stop tone' condition on channel Skinny/111@steve-2 Collected digit: [2] -- Asked to indicate 'Stop tone' condition on channel...

Hi, we do have some subnetworks for private computers, which are allowed to use there public smtp servers like msn, web.de or whatever with the users private accounts. All our own computers have to send mail trough our mailserver with user authentication. From time to time we are faced with the fact, that a virus infected private notebook sends spam and we are told by our ISP to take care :)

Hi ! I'm about to deploy a new server that will host several virtual host for mainly website hosting purposes. My server will be a Xeon 3440 or 3450 with 32 gigs of ram (the max of that board). So I will have 8 logical cores. At the moment, I don't know how many vms I will have, in the order of 5 or 6. I am quite new to managing VMs, I did play alot with them over the course of the

I am trying to find a good how-to on setting up samba to use Windows 2003 for authentication, if anyone knows of a good link let me know. I am using RedHat ES 3 and our Windows is running in native mode with NT style authentication allowed. I cant use ADS and Kerberos because the current version of Kerberos on my RH server is 1.2.7 and from what I have read I need 1.3+ in order for it to work

...nderstood by the GDK? ? Looking in the technical book for the GDK it states that the requirement is that the information element "Called Number" contains the required digits, and it does, I'm stumped? ? ? Here's the debug of the session - slightly edited to reduce the size(!): ? ? Linux3*CLI> pri debug span 2 Enabled debugging on span 2 < Protocol Discriminator: Q.931 (8)? len=22 < Call Ref: len= 2 (reference 32527/0x7F0F) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1? Q.931 Std: 0? Info transfer capability: Speech...

Hello, I was not happy with the power consumption of CentOS 6 x86_64 on a new Lenovo Thinkpad x220 Tablet and I worked on reducing it. I just wanted to share with the list one of the changes which gave me the most significant improvement. As per http://www.williambrownstreet.net/blog/?p=387, add the following kernel arguments to the GRUB boot configuration: pcie_aspm=force

Hi! Is there any experience of converting vmware''s vmdk file to a domU image? Maybe via extracting vmdk (how?) -> build tar -> untar in domU? That would be very nice despite replacing the original kernel with a self-built one and worthy to write a script... :) Cheers, Sven. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com