search for: irq9

Hi Yonghyeon and All, >From time to time I use a notebook and boot FreeBSD from USB stick. FreeBSD 9.2-i386 works OK. So I tried to use FreeBSD 10.0-i386 BETA2 and the network adapter works for some 10-15 seconds and then stops with diagnostic message "msk0:watchdog timeout". I've found similar case at freebsd-current@ with no workaround. Yes, there is an interrupt storm as well.

...00] gsi_base[16]) (XEN) IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, GSI 16-31 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 997.483 MHz processor. (XEN) Initing memory sharing. (XEN) MCE: The hardware reports a non fatal, corre...

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

...g it and so far, the problem was solved. After a few days in production with the new kernel, GENERIC without USB and firewrire i've found other interrupt problems: vmstat -i: oro# vmstat -i interrupt total rate irq1: atkbd0 2 0 irq9: acpi0 1 0 irq19: re0 39786514 42 irq22: atapci0 8050818241 8515 cpu0: timer 1890881479 1999 cpu1: timer 1890881390 1999 Total 11872367627...

...rd /initrd-2.6.24.3-34.fc8.img title Fedora (2.6.23.1-42.fc8) root (hd0,0) kernel /vmlinuz-2.6.23.1-42.fc8 ro root=/dev/VolGroup00/LogVol00 noapic acpi=off rhgb quiet initrd /initrd-2.6.23.1-42.fc8.img When I boot the xen kernel, I get a message about no-one caring about IRQ9, and at about that time my keyboard stops responding (tested by watching the numlock light when pressing the numlock key) I am using a stock standard Fedora 8 install only using yum to install and upgrade. I would really like to get this working, but I have not found anything that works. I ha...

Hello, I have two TE-405Ps that I am having trouble with. I'm using an Intel 865 motherboard with a Celeron D processor. Kernel 2.4.26, Slackware 10.0. my /proc/interrupts: CPU0 0: 172317 XT-PIC timer 1: 2 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 2003 XT-PIC eth0 8: 1 XT-PIC rtc

...al_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) ACPI: IRQ14 used by override. (XEN) ACPI: IRQ15 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credi...

...uid 0: exited on signal 10 (core dumped) Mar 17 14:32:23 box kernel: interrupt storm detected on "irq22:"; throttling interrupt source Mar 17 14:32:54 box last message repeated 31 times Mar 17 14:34:55 box last message repeated 121 times $ vmstat -i interrupt total rate irq1: atkbd0 3 0 irq9: acpi0 1 0 irq16: ohci0 1 0 irq17: ohci1 ohci3 1 0 irq18: ohci2 ohci4 1 0 irq22: atapci0 57317362717 134713 cpu0: timer 850996016 2000 cpu1: timer 850995703 2000 Total 59019354443 138713 [root@box /etc]# atacontrol mode ad4 current mode = SATA300 [root@box /etc]# atacontrol mode ad6 current mode...

...supply information about this last problem. In my dmesg I get: [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.014754] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20130517/dswload-194) [ 0.117596] ACPI: Using IOAPIC for interrupt routing [ 0.127508] acpi PNP0A08:00: _OSC failed (AE_ERROR); disa...

...00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) [VT-D]iommu.c:1168: IOMMU: unsupported (XEN) ---- print_iommu_regs ---- (XEN) drhd->address = 0 (XEN) VER = f0004800 (XEN) CAP = f000eef3f000e2c3 (XEN) n_fault_reg = ef (XEN...

...00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) ERST table was not found (XEN) Using ACPI (MADT) for SMP configuration i...

I am trying to get QNX working with Xen. I''ve going about it in a similar way as installing windows with Xen, but when I start the guest up to install the OS it hangs on the line: ''Hit Esc for .altboot.......'' If anyone has managed to get this working, or has any ideas/advice for me here it would be greatly appreciated! Bryan

Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on

...000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Early fatal page fault at e008:ff1ccc06 (cr2=ffffffa0, ec=0000) (XEN) Stack dump: 00000004 03babfa0 00000000 fffff00...

...ec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 1800.096 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 20...

...I: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) SMP: Allowing 4 C...

I'm running CentOS 5.1 with all updates, and the xen kernel. For some reason the OS is not seeing the full amount of ram. #uname -a Linux CentOS-VM-A 2.6.18-53.1.21.el5xen #1 SMP Tue May 20 10:03:27 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux # free total used free shared buffers cached Mem: 6104064 3445136 2658928 0 1412236

...c00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs . . . (XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x1 handle 0x8 (XEN) AMD-Vi: IVHD Device Entry: type 0x48 id 0 flags 0xd7 (XEN) AMD-Vi: IVHD Special: 0000:00:14.0 variety 0x2 handle 0 (XEN) AMD-Vi: IVHD Device Entry: type...

...0000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) Invalid bit width in GAR (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X (XEN) C...