search for: ip_port

Hi everyone; I have a problem on my 10 nodes cluster with ocfs2 1.2.9 and the OS is RHEL 4.7 AS. 9 nodes can start o2cb service and mount san disks on startup however one node can not do that. My cluster configuration is : node: ip_port = 7777 ip_address = 192.168.5.1 number = 0 name = fa01 cluster = ocfs2 node: ip_port = 7777 ip_address = 192.168.5.2 number = 1 name = fa02 cluster = ocfs2 node: ip_port = 7777 ip_address = 19...

...older post which seems not applicable anymore. I have a cluster of 2 nodes right now, which has 3 OCFS2 file systems. All the file systems were formatted with 4 node slots. I added the two news nodes (by hand, by ocfs2console and o2cb_ctl), so my /etc/ofcfs/cluster.conf looks right: node: ip_port = 7777 ip_address = 192.168.201.1 number = 0 name = dbcl1n1 cluster = dbcl1 node: ip_port = 7777 ip_address = 192.168.201.2 number = 1 name = dbcl1n2 cluster = dbcl1 node: ip_port = 7777 ip_address = 192.168.2...

...-rw-r--r-- 1 0 0 0 16-Aug-2007 22:01 truncate_log:0002 63 -rw-r--r-- 1 0 0 0 16-Aug-2007 22:01 truncate_log:0003 debugfs: My custer.conf : cluster: node_count = 2 name = pool_5 node: ip_port = 1015 ip_address = 10.17.178.132 number = 1 name = jaguar cluster = pool_5 node: ip_port = 1015 ip_address = 10.17.178.133 number = 2 name = joon cluster = pool_5 cluster: node_count = 2 name = poo...

...e: text/plain; charset="iso-8859-9" Hi everyone; I have a problem on my 10 nodes cluster with ocfs2 1.2.9 and the OS is RHEL 4.7 AS. 9 nodes can start o2cb service and mount san disks on startup however one node can not do that. My cluster configuration is : node: ip_port = 7777 ip_address = 192.168.5.1 number = 0 name = fa01 cluster = ocfs2 node: ip_port = 7777 ip_address = 192.168.5.2 number = 1 name = fa02 cluster = ocfs2 node: ip_port = 7777 ip_address = 19...

hi there i try to setup OCFS2 with loop device /dev/loop0 i've 4 servers running SLES10 SP2. internal ip's: 192.168.55.1, .2, .3 and .6 my cluster.conf: -------------------------------------------- node: ip_port = 7777 ip_address = 192.168.55.1 number = 0 name = www cluster = cawww node: ip_port = 7777 ip_address = 192.168.55.2 number = 1 name = www2 cluster = cawww node: ip_port = 7777 ip_address = 192.168.55.3...

...wasn't hardware problem. The sotrage was responsible, we don't have any errors in storage event log. The question is why the other nodes crashed. The configuration is the same as it was in december (cluster.conf). Regards, Piotr Teodorowski -------------- next part -------------- node: ip_port = 7777 ip_address = 172.28.4.48 number = 0 name = es1prgw01 cluster = ocfs2 node: ip_port = 7777 ip_address = 172.28.4.56 number = 1 name = es4prgw01 cluster = ocfs2 node: ip_port = 7777 ip_address = 172.28.4.65 number = 3 name = es1prap02 cluster = ocfs2 node: ip_port = 7777 ip_...

.... Thanks in advance for any and all help. Here's my post on the bug: seems like we're back to having this bug again. I'm posting both cluster.conf and the error that happens at the command line. <cluster.conf> cluster: node_count = 2 name = xport1 node: ip_port = 7777 ip_address = 10.8.4.81 number = 1 name = wings cluster = xport1 node: ip_port = 7777 ip_address = 10.8.4.82 number = 2 name = xtc cluster = xport1 cluster: node_count = 2 name = xport2 node: ip_por...

Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager

...ng /dev/disk/by-name/commondisk-part1 on /zdisk/ocfs2". On mach1, mount shows "/dev/dm-4 on /zdisk/ocfs2 type ocfs2 (rw,_netdev,heartbeat=local)". [1] /etc/multipath.conf translates the WWID into /dev/disk/by-name/commondisk-part1 Following my /etc/ocfs2/cluster.conf: node: ip_port = 7777 ip_address = 141.65.128.114 number = 0 name = mach1 cluster = ocfs2 node: ip_port = 7777 ip_address = 141.65.128.113 number = 1 name = mach2 cluster = ocfs2 node: ip_port = 7777 ip_address = 141.65.128....

An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20110303/0fbefee6/attachment.html

I people, i install the ocfs in my virtual machine, with centos 5.3 and xen. But when i turn off the machine1, the ocfs start the fencing off the machine2. I read the doc in oracle.com, but could not solve the problem. Someone help? My conf and my package version. cluster.conf node: ip_port = 7777 ip_address = 192.168.1.35 number = 0 name = x1 cluster = xx node: ip_port = 7777 ip_address = 192.168.1.36 number = 1 name = x2 cluster = xx cluster: node_count = 2 name = xx o2cb: # 'dpk...

...3 uc1 kernel: [ 1181.258192] ocfs2: Mounting device (147,1) on (node 1, slot 0) with ordered data mode. mount | grep cluster /dev/drbd1 on /cluster type ocfs2 (rw,_netdev,heartbeat=local) Why doesn't o2cb 'stick' after a reboot? Thanks, Steve /etc/ocfs2/cluster.conf node: ip_port = 7777 ip_address = 192.168.0.10 number = 1 name = uc1 cluster = ocfs2 node: ip_port = 7777 ip_address = 192.168.0.11 number = 2 name = uc2 cluster = ocfs2 cluster: node_count = 2 name = ocfs2 /etc/drbd.conf...

...3 hour to reboot, on idle about 20 hours. I not sure what it is a OCFS2 related but if I not mount OCFS2 partition - I don`t get this reboot. In attach screenshoot with system console on what error. Nothing special in logs. My config below: mail02:~# cat /etc/ocfs2/cluster.conf node: ip_port = 7777 ip_address = 192.168.1.1 number = 0 name = node01.domain.org cluster = ocfs2 node: ip_port = 7777 ip_address = 192.168.1.2 number = 1 name = mode02.domain.org cluster = ocfs2 cluster: node_count = 2...

...g packages : ocfs2-2.6.18-92.el5-1.4.1-1.el5.x86_64.rpm ocfs2-tools-1.4.1-1.el5.x86_64.rpm ocfs2console-1.4.1-1.el5.x86_64.rpm (download from oss.oracle) Installed them (good enough). Placed the following /etc/ocfs2/cluster.conf : cluster: node_count = 2 name = ocfscluster node: ip_port = 7777 ip_address = 192.168.2.36 number = 1 name = newglfs01 cluster = ocfscluster node: ip_port = 7777 ip_address = 192.168.2.37 number = 2 name = newglfs02 cluster = ocfscluster Tried to run : service o2cb configure ... and got the following...

...etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root at sai93 ~]# uname -r 2.6.18-128.el5 [root at sai93 ~]# rpm -qa| grep ocfs ocfs2console-1.4.4-1.el5 ocfs2-2.6.18-128.el5-1.4.7-1.el5 ocfs2-tools-1.4.4-1.el5 [root at sai93 ~]# cat /etc/ocfs2/cluster.conf node: ip_port = 7777 ip_address = 10.71.10.93 number = 0 name = sai93 cluster = ocfs2 node: ip_port = 7777 ip_address = 10.71.10.94 number = 1 name = sai94 cluster = ocfs2 cluster: node_count =2 name = ocfs2 [root at sai93 ~...

We have a test 10gR2 RAC cluster using ocfs2 filesystems for the Clusterware files and the Database files. We need to increase the node slots to accomodate new RAC nodes. Is it true that we will need to umount these filesystems for the upgrade (i.e. Database and Clusterware also)? We are planning to use the following command format to perform the node slot increase: # tunefs.ocfs2 ?N 3

Hi to all, this is My first time on this mailinglist. I have a problem with Ocfs2 on Debian etch 4.0 I'd like when a node go down or freeze without unmount the ocfs2 partition the heartbeat not fence the server that work well ( kernel panic ). I'd like disable or heartbeat or fencing. So we can work also with only 1 node. Thanks

...lume on the 2 other machines and look at the dmesg of the first machine which has the volume mounted nothing else appears, not even a message of the other nodes joining the cluster. The cluster.conf is the same on all 3 nodes: cluster: node_count = 3 name = ocfs2 node: ip_port = 7777 ip_address = 172.28.100.27 number = 1 name = tilmysql1 cluster = ocfs2 node: ip_port = 7777 ip_address = 172.28.100.28 number = 2 name = tilmysql2 cluster = ocfs2 node: ip_port = 7777 ip_address = 172.28.100...

I am trying to mount the same partition from a KVM ubuntu 8.04.1 virtual machine and on an ubuntu 8.04.1 host server. I am able to mount the partition just on fine on two ubuntu host servers, they both talk to each other. The logs on both servers show the other machine mounting and unmounting the drive. However, when I mount the drive in the KVM VM I get no communication to the host

Hello list! Just pulled down ocfs2 this morning and installed it on two RHEL 4 2.6.9-34 systems. I have followed the manual, but am not seeing some things it describes and am not sure what the problem is. I guess my first question is - do I need to have a partition formatted as ocfs2 on all nodes in the cluster for this to work? I have formatted a partition via ocfs2console on node1, and