search for: info_ind

...Info = 0x0 -- CONNECT_CONF ID=003 #0x0844 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 == received CONNECT_CONF PLCI = 0x101 INFO = 0 > sent CONNECT_REQ MN =0x844 -- Called 010xxxxxx:b0478xxxxxx -- INFO_IND ID=003 #0x811c LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8002 InfoElement = default -- INFO_IND ID=003 #0x811c LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8002 InfoElement...

...hone) and the last output on the asterisk console (capi debug + set verbose 15) is == ISDN1: Incoming call '0650621XXXX' -> '11' When I unplug the ISDN line *after several minutes* I'm getting a disconnect indication with a layer 1 error. Interesting is, that I receive an INFO_IND *before* the CONNECT_IND. This looks like an interesting variation of Austrian ISDN to me. I've tried both, immediate=no and immediate=yes in the config-file. The attached log is with immediate=yes. The behaviour is the similar to chan_capi-0.4 (I'm still using a patched 0.35 version in my...

...= default Facilitydataarray = default SendingComplete = default -- Called contr2/120/b CONNECT_CONF ID=002 #0x060c LEN=0014 Controller/PLCI/NCCI = 0x302 Info = 0x0 -- contr2#02: received CONNECT_CONF PLCI = 0x302 INFO_IND ID=002 #0x0687 LEN=0017 Controller/PLCI/NCCI = 0x302 InfoNumber = 0x1e InfoElement = <81 88> INFO_RESP ID=002 #0x0687 LEN=0012 Controller/PLCI/NCCI = 0x302 -- contr2#02: info element PI 81 88 > contr2#02: I...

...msn=* ;msn=61 controller=1 devices=2 context=incoming extensions.conf: [incoming] exten => _XX,1,Playback(demo-abouttotry) exten => _XX,n,Dial,SIP/xlite1 exten => _XX,n,HangUp When call is placed, the following debug info is shown, after the last line, it stalls until caller gives up: INFO_IND ID=001 #0x040a LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x7e InfoElement = <04> > CAPI: no interface for PLCI = 0x101 MN = 0x40a INFO_RESP ID=001 #0x040a LEN=0012 Controller/PLCI/NCCI = 0x101 CAPI: IN...

...default HLC = <91 81> AdditionalInfo = default == CONNECT_IND (PLCI=0x101,DID=30,CID=01722950xxx,CIP=0x10,CONTROLLER=0x1) -- Executing Wait("CAPI[contr1/30]/0", "1") in new stack -- started pbx on channel! -- INFO_IND ID=004 #0x0315 LEN=0018 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x70 InfoElement = <81>30 -- INFO_IND ID=004 #0x0316 LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x18 InfoElement...

hi, I've been running a pure sip asterisk box for a while now with no problems, and i've recently added an isdn2e line from bt in the uk. everything is hooked up and i've got it ringing my sip extensions, but the logs don't quite look perfect and i can't see any description of what i should consider to be normal behaviour. would someone be able to look this over and tell me

...= default Facilitydataarray = default SendingComplete = default -- Called g1/4028 CONNECT_CONF ID=002 #0x3f55 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 == received CONNECT_CONF PLCI = 0x101 INFO = 0 INFO_IND ID=002 #0x5755 LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x800d InfoElement = default INFO_RESP ID=002 #0x5755 LEN=0012 Controller/PLCI/NCCI = 0x101 == info element SETUP ACK INFO_IND ID=002 #0x5756 LEN=0017 Contr...

...= <91 81> AdditionalInfo BChannelinformation = default Keypadfacility = default Useruserdata = default Facilitydataarray = default == CONNECT_IND (PLCI=0x201,DID=4132,CID=03621423132,CIP=0x10,CONTROLLER=0x1) -- INFO_IND ID=001 #0x000a LEN=0020 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x70 InfoElement = <81>4132 2005-01-05 15:41:32 ERROR[31716]: chan_capi.c:1696 pipe_msg: did not find device for msn = 4132 -- INFO_IND ID=001 #0x000b LEN=0018 Co...

...HLC = <91 81> AdditionalInfo = default -- CONNECT_IND (PLCI=0x101,DID=99546476,CID=(null),CIP=0x10,CONTROLLER=0x1) > ISDN1: msn='*' DNID='99546476' MSN == ISDN1: Incoming call '' -> '99546476' INFO_IND ID=001 #0x03a7 LEN=0024 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x70 InfoElement = <c1>99546476 INFO_RESP ID=001 #0x03a7 LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element CALLED PARTY NUMBER >...

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

...= <80 90 a3> LLC = default HLC = default AdditionalInfo = default == CONNECT_IND (PLCI=0x101,DID=1138121122,CID=1181114000,CIP=0x1,CONTROLLER=0x1) -- creating pipe for PLCI=0x101 msn = * -- INFO_IND ID=001 #0x0001 LEN=0026 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x70 InfoElement = <a1>1138121122 -- INFO_IND ID=001 #0x0001 LEN=0026 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x70 InfoEleme...

...9:22:36 ERROR[49156]: File chan_capi.c, Line 1930 (capi_handle_msg): did not find device for msn = 5430754 Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to find a pipe for PLCI = 0x301 MN = 0x4f01 Oct 22 09:22:36 NOTICE[49156]: File chan_capi.c, Line 1211 (pipe_msg): INFO_IND ID=001 #0x4f01 LEN=0023 Controller/PLCI/NCCI = 0x301 InfoNumber = 0x70 InfoElement = <c1>5430754 Oct 22 09:22:36 ERROR[49156]: File chan_capi.c, Line 1111 (find_pipe): unable to find a pipe for PLCI = 0x301 MN = 0x4f02 Oct 22 09:22:36...

...= default HLC = <91 81> AdditionalInfo = default == CONNECT_IND (PLCI=0x101,DID=523065,CID=6101806124,CIP=0x10,CONTROLLER=0x1) Feb 21 11:32:30 ERROR[384]: chan_capi.c:2051 capi_handle_msg: did not find device for msn = 523065 -- INFO_IND ID=001 #0x0021 LEN=0022 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x70 InfoElement = <c1>523065 Feb 21 11:32:30 ERROR[384]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x101 MN = 0x21 Feb 21 11:32:30 NOTICE[384]: chan...

...support: 0x00000012 Terminal Portability Call Forwarding In Asterisk, when an incoming call arrives, it shows me the following: Asterisk Ready. *CLI> capi info Contr1: 2 B channels total, 2 B channels free. *CLI> capi debug CAPI Debugging Enabled *CLI> *CLI> *CLI> -- INFO_IND ID=001 #0x0001 LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x18 InfoElement = <89> -- INFO_IND ID=001 #0x0001 LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x18 InfoElement...

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

...= <91 81> AdditionalInfo = default -- CONNECT_IND (PLCI=0x101,DID=XXX,CID=,CIP=0x10,CONTROLLER=0x1) > ISDN1#02: msn='*' DNID='XXX' MSN == ISDN1#02: setting format alaw - 0x8 (alaw) == ISDN1#02: Incoming call '' -> 'XXX' INFO_IND ID=002 #0x016f LEN=0017 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x1e InfoElement = <80 83> INFO_RESP ID=002 #0x016f LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1#02: info element PI 80 83 > ISDN1#02: Ori...

...1 CONNECT_CONF ID=002 #0x0004 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- ISDN1#02: received CONNECT_CONF PLCI = 0x101 -- Called ISDN1/012341234567 CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x03e7 NCCI=0x00000101 INFO_IND ID=002 #0x03e7 LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8002 InfoElement = default INFO_RESP ID=002 #0x03e7 LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1#02: info element CAL...

...= 0xa0 DataHandle = 0x4da Flags = 0x0 Data64 = 0x0 DATA_B3_CONF ID=001 #0x04e2 LEN=0016 Controller/PLCI/NCCI = 0x10201 DataHandle = 0x4da Info = 0x0 INFO_IND ID=001 #0x04ee LEN=0017 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x8 InfoElement = <82 90> INFO_RESP ID=001 #0x04ee LEN=0012 Controller/PLCI/NCCI = 0x201 -- EICONISDN#02: info element CAUSE 82 90 INFO_IND ID=001 #0x...

...9:49 WARNING[1086696368]: pbx.c:1819 ast_pbx_run: Channel 'CAPI[contr1/**some_number**]/0' sent into invalid extension 's' in context 'default', but no invalid handler -- CAPI Hangingup > activehangingup -- started pbx on channel (callgroup=0)! -- INFO_IND ID=002 #0x011e LEN=0023 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x70 InfoElement = <c1>**some_number** I read in the mailing list archives of commenting out line 2615 in chan_capi.c, but that did not change anything. Has anybo...

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/bmp Size: 2918 bytes Desc: Picture (Metafile) Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050307/cb404791/attachment.bmp