search for: hvmassist

...a to it I get hundreds of: EXT3-fs error (device ide0(3,65)): ext3_new_block: Allocating block in system zone - block = 8257846 and after a few minutes the hard drive corrupts itself (even superblock lost) Looking at the qemu-dm.log file I can see that no matter what size of disk I use I get: HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0-0: PCHS=5952/16/63 translation=lba LCHS=744/128/63 ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (2929 MBytes) *ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 ata0 slave: QEMU HARDDISK ATA-2 Hard-Disk (32120 MBytes) * This...

Hello, The xm config option boot="c" is intended to boot from the "first" harddrive; however, the enumeration of harddrives is independent of device enumeration (hda|hdb|hdc|hdd), leading to unreliable boot device selection. Example A: I am building a Windows HVM appliance which performs file-system level operations over mounted NTFS volumes - for example a file-system

...Ball <aball@us.ibm.com> diff -r 1d817bfc5ed9 tools/firmware/rombios/rombios.c --- a/tools/firmware/rombios/rombios.c Fri Aug 11 14:22:54 2006 +0100 +++ b/tools/firmware/rombios/rombios.c Fri Aug 11 14:55:22 2006 -0400 @@ -9443,6 +9443,43 @@ rom_scan_increment: mov ds, ax ret +#ifdef HVMASSIST + +; Copy the SMBIOS entry point over from 0x9f000, where hvmloader left it. +; The entry point must be somewhere in 0xf0000-0xfffff on a 16-byte boundary, +; but the tables themeselves can be elsewhere. +smbios_init: + push ax + push cx + push es + push ds + push di + push si + + mov cx, #0...

...-mode: ip=F000:FFF0 (XEN) (GUEST: 1) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 1) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 1) (XEN) (GUEST: 1) ata0-0: PCHS=2082/16/63 translation=lba LCHS=1024/32/63 (XEN) (GUEST: 1) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (1025 MBytes) (XEN) (GUEST: 1) ata0 slave: Unknown device (XEN) (GUEST: 1) ata1 master:...

...T: 11) rombios.c,v 1.138 2005/05/07 15:55:26 | vruppert Exp $ | (XEN) (GUEST: 11) Remapping master: ICW2 0x8 -> 0x20 | (XEN) (GUEST: 11) Remapping slave: ICW2 0x70 -> 0x28 | (XEN) (GUEST: 11) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 | vruppert Exp $ | (XEN) (GUEST: 11) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: | 2005/05/07 15:55:26 $ | (XEN) (GUEST: 11) | (XEN) (GUEST: 11) ata0-0: PCHS=16383/16/63 translation=lba | LCHS=1024/255/63 | (XEN) (GUEST: 11) ata0 master: QEMU HARDDISK ATA-2 | Hard-Disk (10241 MBytes) | (XEN) (GUEST: 11) ata0 slave: Unknow...

Hi all, I''m using ThinkPad T60, with xen3.1.0, windows could be installed into a file based virtual disk. however, when I tried to use a physical disk, I got this err msg: HVMAssist BIOS, 1 cpu $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (0 MBytes) ata0 slave: UnKnown device Booting from Hard Disk... Boot from Hard Disk failed: could not read the boot disk FATAL: No bootable device. anyone got the same issue before? some info...

...vruppert Exp $ | > | (XEN) (GUEST: 11) Remapping master: ICW2 0x8 -> 0x20 | > | (XEN) (GUEST: 11) Remapping slave: ICW2 0x70 -> 0x28 | > | (XEN) (GUEST: 11) VGABios $Id: vgabios.c,v 1.61 | 2005/05/24 16:50:50 | > | vruppert Exp $ | > | (XEN) (GUEST: 11) HVMAssist BIOS, 1 cpu, $Revision: | 1.138 $ $Date: | > | 2005/05/07 15:55:26 $ | > | (XEN) (GUEST: 11) | > | (XEN) (GUEST: 11) ata0-0: PCHS=16383/16/63 translation=lba | > | LCHS=1024/255/63 | > | (XEN) (GUEST: 11) ata0 master: QEMU HARDDISK ATA-2 | > | Hard-Di...

...ble to boot, i see some kind of grub error. The console of this machine prints out: ===== Plex86/Bochs VGABios current-cvs 07 Jun 2008 This VGA/VBE Bios is released under the GNU LGPL Please visit : * http://bochs.soureeferge.net * http://www.nongnu.org/vgabios cirrus-compatible VGA is detected HVMAssist BIOS, 1 Cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (35840 MBgtes) ata0 slave: Unknown device ata1 master: masteri QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom ata1 slave: Unknown device Booting from Hard Disk... GRUB GRUB _ ===== After this, the boot proc...

I am currently having problems persuading 3.0.4 (binary dist) to boot a virtual machine from a virtual floppy when running in HVM mode. Although I can boot a real computer from a real drive with my floppy image, with Xen it merely hangs after saying: HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ If I give it a completely blank floppy image, it does the same (I''d expect a "not bootable" complaint), and if I point it at a floppy image which does not exist, it produces no window at all, and is shown in state '...

...mode: ip=F000:FFF0 (XEN) (GUEST: 8) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 8) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 8) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 8) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 8) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 8) (XEN) (GUEST: 8) ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) (GUEST: 8) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (10000 MBytes) (XEN) (GUEST: 8) ata0 slave: Unknown device (XEN) (GUEST: 8) ata1 mas...

...tall was successfully (The machine bootet from the dvd-image, the hd was detected correctly). During the SLES setup i created to partitions (/ (450GB) and swap(30GB)) and installed grub in the MBR as well as in /. Unfortunatelly, after the first Boot the Systems hangs at grub after loading the HVMAssist Bios with the following message: ---------------- ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (18188 MBytes) ata0 slave: Unknown device Booting from Hard Disk... GRUB Loading stage1.5. GRUB loading, please wait... Error 2 ---------------...

...tables ... (XEN) (GUEST: 41) Loading Cirrus VGABIOS ... (XEN) (GUEST: 41) Loading ACPI ... (XEN) (GUEST: 41) SVM go ... (XEN) (GUEST: 41) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 41) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 41) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 41) (XEN) (GUEST: 41) ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) (GUEST: 41) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (10240 MBytes) (XEN) (GUEST: 41) ata0 slave: Unknown device (XEN) (GUEST: 41)...

...00FEC00000 - 0000000100000000 (Type 16) Start BIOS ... Starting emulated 16-bit real-mode: ip=F000:FFF0 rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ Remapping master: ICW2 0x8 -> 0x20 Remapping slave: ICW2 0x70 -> 0x28 VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0-0: PCHS=8129/16/63 translation=lba LCHS=1016/128/63 ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4001 MBytes) ata0 slave: Unknown device ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom ata1 slave: Unknown device Booting from CD-Ro...

...ip=F000:FFF0 (XEN) (GUEST: 33) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 33) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 33) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 33) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 33) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 33) (XEN) (GUEST: 33) ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) (GUEST: 33) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (20480 MBytes) (XEN) (GUEST: 33) ata0 slave: Unknown device (XEN) (GUEST: 33) ata...

I am trying to get QNX working with Xen. I''ve going about it in a similar way as installing windows with Xen, but when I start the guest up to install the OS it hangs on the line: ''Hit Esc for .altboot.......'' If anyone has managed to get this working, or has any ideas/advice for me here it would be greatly appreciated! Bryan

...1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) HVM_PIT: guest freq in cycles=150008023 (XEN) (GUEST: 24) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 24) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 24) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 24) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 24) (XEN) (GUEST: 24) ata0-0: PCHS=16646/16/63 translation=lba LCHS=1024/255/63 (XEN) (GUEST: 24) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (8193 MBytes) (XEN) (GUEST: 24) ata0 slave: Unknown device (XEN) (GUEST: 24) ata1...

Hello all Xen devels, I''m writing howto''s in brazilian portuguese language about Xen-3.3.0 stubdom, pv-grub and others configurations. Following what is written in xen-3.3.0/stubdom/README, I tried start a HVM but without success. When I start the virtual machine calling ''xm create hvmtest'' command, in a few seconds the virtual machine is dead (see

We (Michael Fetterman, George Dunlap and I) have been working over the last while on a full replacement for Xen''s shadow pagetable support. This mail contains some design notes, below; a patch against xen-unstable, giving a snapshot of the current state of the new shadow code, is at http://www.cl.cam.ac.uk/~tjd21/shadow2.patch Comments on both are welcome, although the code is not

...ing MP tables ... (XEN) (GUEST: 12) Loading Cirrus VGABIOS ... (XEN) (GUEST: 12) Loading ACPI ... (XEN) (GUEST: 12) SVM go ... (XEN) (GUEST: 12) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 12) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 12) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 12) (XEN) (GUEST: 12) ata0-0: PCHS=4161/16/63 translation=lba LCHS=520/128/63 (XEN) (GUEST: 12) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (2048 MBytes) (XEN) (GUEST: 12) ata0 slave: Unknown device (XEN) (GUEST: 12) (XEN) (...

..._PIT:pass info 0xc00e90b to HV! Remapping master: ICW2 0x8 -> 0x20 Remapping slave: ICW2 0x70 -> 0x28 VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ set_map result i 0 result 3898b set_map result i 1 result 38988 ...yatta, yatta, yatta, set_map result i 3ff result 38589 HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ ata0-0: PCHS=10402/16/63 translation=lba LCHS=652/255/63 ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (5120 MBytes) ata0-1: PCHS=10402/16/63 translation=lba LCHS=652/255/63 ata0 slave: QEMU HARDDISK ATA-2 Hard-Disk (5120 MBytes) Bootin...