search for: hsync

...een0" Device "Device0" EndSection Section "Screen" Identifier "Screen1" Device "Device1" EndSection *** Xorg.0.log *** [ 27.845] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 27.845] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 27.845] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [...

...hment (id=24327) --> (http://bugs.freedesktop.org/attachment.cgi?id=24327) bios I'm using a 9600GSO/386Mb card with a CRT Horizon Monitor connected using a dvi2vga connector and with the following modeline: ModeLine "1280x960 at 75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync This works in nv, nvidia and vesa drivers. In nouveau I get an Out of Range Popup, a plain black screen or a backtrace: Caught signal 8. Server aborting (EE) NOUVEAU(0): PLL limits table revision 0x30 not currently supported For certain fixed vertical and horizontal ranges I get either a...

I originally set up this monitor with an analogue lead. Everything seemed fine, so I didn't check xorg.conf at all. Then I bought a digital lead, and since then the monitor blinks. Running system-config-display identifies it as a 1280 x 1084 CRT monitor. It is an LCD monitor. That model is not on the drop-down list, so assuming that a specific driver wasn't available for it, I

...ce "I2C bus:ddc2" registered at address 0xA0. (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed. (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) (--) S3VIRGE(0): videoram: 2048k (--) S3VIRGE(0): Detected current MCLK value of 45.102 MHz (II) S3VIRGE(0): Monitor0: Using hsync range of 31.50-80.00 kHz (II) S3VIRGE(0): Monitor0: Using vrefresh range of 30.00-100.00 Hz (II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz (II) S3VIRGE(0): Not using default mode "1024x768" (insufficient memory for mode) (II) S3VIRGE(0): Not using default mode "1024x768" (in...

...1.0, 1.0) unless otherwise stated. (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 1280) (**) NOUVEAU(0): Driver mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz) (**) NOUVEAU(0): Mode "1600x1200": 206.0 MHz (scaled from 0.0 MHz), 94.0 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "1600x1200"x75.0 205.99 1600 1720 1896 2192 1200 1201 1204 1253 -hsync +vsync (94.0 kHz) (**) NOUVEAU(0): Driver mode "1600x1200": 202...

I installed C7 along with MATE desktop... My monitor is a 4K unit but when I goto the System -> preferences -> hardware -> Displays there is selection for the 4K display. It stops at 1920x1080. The var log x file shows the 4K resolutions in the file so that is good. How do I get the selections for 4K to show up? Thanks, Jerry

...t; # Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz Modeline "1280x768-60.0" 80.14 1280 1344 1480 1680 768 769 772 795 # Default mode "1280x720": 74.6 MHz, 44.2 kHz, 59.2 Hz Modeline "1280x720-59.2" 74.60 1280 1341 1474 1688 720 721 724 746 -hsync +vsync # Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz Modeline "1024x768-60.0" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync EndSection Section "Monitor" Identifier "HP-2133 LCD" VertRefresh 50.00-100.00 # X11 dis...

...UVEAU(0): 3336394d0a20202020202020000000ff [ 4.689] (II) NOUVEAU(0): 00000000000000000000000000000059 [ 4.689] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4...

...) NOUVEAU(0): 4b1e5511000a202020202020000000fc [ 26.642] (II) NOUVEAU(0): 0041535553205657323636480a2000b2 [ 26.642] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 26.642] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 26.642] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 26.642] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [...

...) NOUVEAU(0): 4b185211000a202020202020000000fc [ 25.261] (II) NOUVEAU(0): 00565832363430770a2020202020002a [ 25.261] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 25.261] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 25.261] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 25.261] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7...

...U(0): Using EDID range info for horizontal sync [ 4677.074] (II) NOUVEAU(0): Using EDID range info for vertical refresh [ 4677.074] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 4677.074] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) [ 4677.074] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 4677.074] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 4677.074] (II) NO...

...t; # Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz Modeline "1280x768-60.0" 80.14 1280 1344 1480 1680 768 769 772 795 # Default mode "1280x720": 74.6 MHz, 44.2 kHz, 59.2 Hz Modeline "1280x720-59.2" 74.60 1280 1341 1474 1688 720 721 724 746 -hsync +vsync # Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz Modeline "1024x768-60.0" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync EndSection Section "Monitor" Identifier "HP-2133 LCD" VertRefresh 50.00-100.00 # X11 dis...

...0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0 [ 6.540] (II) NOUVEAU(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 h_blank_end 4400 h_border: 0 [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP) [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync -vsync (67.5 kHz e) [ 7.104] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3...

...e of failed request: 30 (RRSetOutputPrimary) Serial number of failed request: 45 Current serial number in output stream: 47 Xorg.log.0 entries added during the last xrandr command: [ 2392.882] (II) NOUVEAU(G0): EDID vendor "DEL", prod id 16485 [ 2392.883] (II) NOUVEAU(G0): Using hsync ranges from config file [ 2392.883] (II) NOUVEAU(G0): Using vrefresh ranges from config file [ 2392.883] (II) NOUVEAU(G0): Printing DDC gathered Modelines: [ 2392.883] (II) NOUVEAU(G0): Modeline "2560x1600"x0.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz e...

...have had to do that that I have totally forgotten how to do it. And I have been unable to find it with a websearch either. >From /var/log/Xorg.0.log: (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0...

https://bugs.freedesktop.org/show_bug.cgi?id=48464 Bug #: 48464 Summary: Crash when GLXVBlank set to true Classification: Unclassified Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

...UVEAU(0): 3336394d0a20202020202020000000ff [ 4.689] (II) NOUVEAU(0): 00000000000000000000000000000059 [ 4.689] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 4.689] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4...

On Sun, Sep 23, 2018 at 12:26 PM, Wolfgang Rißler <wolle321 at freenet.de> wrote: > I try to send a friendly ping to my problem. > At the moment I'm running at 1600x1200 (monitor than has 1600x1200 > too), what looks better then 1920x1200 picture on that Monitor with > 960x1200. > I cant get 1920x1200 working, but I'm shure, that the monitor has this > native

...a202020202020000000fc0031 (II) NOUVEAU(0): 37544654204c4344204d4e54000000fe (II) NOUVEAU(0): 003230303230353133202020202000d3 (II) NOUVEAU(0): Printing probed modes for output VGA-1 (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz eP) (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) (II) NOUVEAU(0): Model...

...c: 3888 h_sync_end 3920 > h_blank_end 4000 h_border: 0 > [ 6.540] (II) NOUVEAU(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 > h_blank_end 4400 h_border: 0 > [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 > 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP) > [ 6.996] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 297.00 3840 4016 > 4104 4400 2160 2168 2178 2250 +hsync -vsync (67.5 kHz e) > [ 7.104] (II) NOUVEAU(0): Modeline "3840x2160"x0.0 533.25 3840 3888 > 3920 4000 2160 2163 2168 2222...